I have had 1 nautilus, 2 aerotanks and most recently the aerotank v2 with the v2 atomizer heads. My problem with the nautlius was constant leaking. My main problem with the aerotanks is dry hits. I'm almost positive it's mainly the coil heads causing the dry hits. It is my understanding that it is a known thing that the replacement coil heads have a high failure rate? I find this kind of unacceptable. I am growing tired of the inconsistency of this ..... Some days are great and some days it seems as if i have nothing but problems and it does nothing but drive me to a real cigarette. If someone can please recommend a tank or any ....ing thing that is consistent and reliable that would be great!!!!! I don't feel like taking the time to learn about rebuilding. I'm willing to fork out the cash. It doesn't necessarily have to be a clearo, it can be anything! please help.
I need a reliable tank
- Thread starter Tas9158
- Start date
- th_trl_thread_readers 0
- Status
Kayfun lite + V2. Clone or original.
As to the leaking of the nautilus. That only happens if you haven't reassembled the unit correctly. Actually that only happens with any tank system if you haven't assembled it correctly or it is broken. Could be the unit you have is fake, there are a ton of fake nautilus's.
As to the leaking of the nautilus. That only happens if you haven't reassembled the unit correctly. Actually that only happens with any tank system if you haven't assembled it correctly or it is broken. Could be the unit you have is fake, there are a ton of fake nautilus's.
First off, try doing an advanced search on ECF for the issues you're having with your Nautilus tank. If that doesn't help, you might want to take a look at the Nautilus Mini - I hear the heads for that are interchangeable with the Nautilus and are much better, being designed more like a cartomizer.
Also, you might want to look into carto-tanks. I hear they're virtually leak-proof and, while they do require a bit of fussing-about, are supposedly pretty reliable. Personally, I never got into them. I was mainly into the Protank 2, and still use it even though I'm mostly into rebuilding now. Protanks have their issues, too, though. It took me a while to get all the kinks worked out. Most vaping gear has some limitations and trade-offs, though, since vaping itself is still in its relative infancy. But hang in there and do a little research, and I bet you'll find something that works for you eventually. Just remember that anything that keeps you off the cigarettes is probably worth the effort.
Good luck to you!
Also, you might want to look into carto-tanks. I hear they're virtually leak-proof and, while they do require a bit of fussing-about, are supposedly pretty reliable. Personally, I never got into them. I was mainly into the Protank 2, and still use it even though I'm mostly into rebuilding now. Protanks have their issues, too, though. It took me a while to get all the kinks worked out. Most vaping gear has some limitations and trade-offs, though, since vaping itself is still in its relative infancy. But hang in there and do a little research, and I bet you'll find something that works for you eventually. Just remember that anything that keeps you off the cigarettes is probably worth the effort.
Good luck to you!
I second the Kayfun Lite Plus nod. A pair of those have been my out and about vape for 9 months now. I never had a problem that wasn't caused by me, and never a leak. I would recommend an authentic KFL+ over the clones. Some friends have reported issues with their clones. If you don't want to learn to build your own coils you could always hit a local vape shop. Most of the ones by me offer building for a few dollars or one of the enthusiastic regulars could do it for you.
If you are ready to get into rebuildables, a Kayfun-style RBA.
If not, a quality cartotank like an IBTanked pyrex cartotank.
If not, a quality cartotank like an IBTanked pyrex cartotank.
I guess nobody saw that part of the OP. When I started vaping I had no interest in rebuilding at all, so I totally understand how you feel. The only reason I eventually gave it a shot was because coil heads get expensive after a while, and once I tried it I discovered it was really rewarding and fun. If you ever *do* get around to rebuilding, the Kayfun is definitely the way to go, though it's not without its quirks and learning curve, just like most stuff.
I had the Nautilus didn't care for them much. I switched to the areotank and it was better. About a week a go I picked up the Nautilus Aspire mini with the new bvc coil and now I have found the tank that I truly enjoy vaping on. Do some checking around here on ecf and you will know that so many others feel the same way, What type of juice do you prefer?
Since you asked about the most consistent thing, I would recommend a REO. It's a bottom fed device so the juice goes up through the atty each time you squonk (squeeze the bottle) and wets the coil. So there's never any issues with poor wicking or that sort of thing. The most popular way to use it is with a rebuildable dripper, however you can use regular atomizers & cartomizers with it & they work great.
Actually even tho' I've been using rebuildables for years now, I still enjoy a good carto tank.
And yes, I still punch my own cartos.
Last edited:
Maybe it's me, maybe I'm better than I think, but wrapping a coil for a KF is about as easy as it can get.
Take a 3/32 drill bit and some 28g Kanthal and wrap it around 8 times. Take it off the drill bit and "GENTLY" Squeeze the coil with some tweezers and heat it with a torch. Put the drill bit back through the coil and mount it on the KF deck so the leads go Clockwise around the mounting screws and tighten them down. Now take the drill bit and Raise it so the coil is about 3mm (3/32) off the center air hole and you can straighten and align it at the same time. Take the drill bit out and put the built deck on a mod and heat the coil to see if it heats from center out to the edges. If it doesn't do that equally then use the tweezers to squeeze the coil just after you heat it up to RED HOT and then let go of the fire button on the mod. Once it heats from the center out you are done. Now wick it with some cotton. A little to much or a little to little cotton doesn't matter (Way to much or way to little cotton does matter) and place the ends so they touch the top of the deck the juice channels end at. Wet the wick before you try to place the ends. Assemble the chimney and tank and fill it with juice.
Enjoy .
Talking to many people in vape shops, one of the biggest complaints about ECF is demonstrated here. Noble is correct. Even if that one line wasn't included, the context of the original support request seems to demonstrate clearly, this person wants simplicity. I understand why the jump to Kayfun recommendations was made but a few of you skipped multiple steps.
Tas9158 - In order to help you find what is ideal for you, more information is needed. To get some of that information, some tinkering on your end is also needed. My recommendation is to first find out WHY those problems exists with Nautilus and Aerotank. After finding those answers you can decide if these devices are not worth the effort. I know carto-tanks are the best balance between simplicity, reliability and flavor delivery for me, but I had to get multiple devices working correctly before I could make that decision.
Are these replacement heads or did these issues exist right out of the boxes? Are you vaping in high heat or other environmental extremes? What have you already done to fix the devices? Are you certain the issue isn't your draw technique?
Help us to help you.
Really? As easy as it can get?
Let's compare your directions with what I see as being "as easy as it gets".
Buy a pre-filled cartomizer. Punch it out of the packaging. Remove the rubber caps. Screw it onto the device. You're vaping.
Better yet, lets try disposables and eliminate one or two steps.
I have a Kanger Mega, which wasn't great, but was better than My big Nautilus Aspire and I was ready to take them both and smash them it into teen tiny bits UNTIL I got a hold of the new BVC coils for my Nautilus Aspire. Now, you couldn't wrestle the Nautilus from me if you tried. These coils are a game changer and while they come standard on the mini, are fully compatible with the larger version. I'm on day 6 with my first coil and it's simply the BEST vape I've every experienced. I've tried Kayfun at my local vape shop and it was going to be my next option, but with these coils, I no longer have any dissatisfaction and I don't need (or want) to get into RBA's.
Trust me and many many others here on ECF and get yourself some of the BVC coils. You'll be amazed. Really!
I've been vaping for about 8 months, and I highly recommend the Smok Tech Pyrex Aro tanks. They have been truly hassle free for me, and the coils last for quite a while. The tanks are pretty inexpensive, and I have about 6 of them, so I can rotate my juice. I don't know why they aren't talked about more on this forum, because they really work well. Here is a link:
Smok Tech Pyrex Aro Tank
Smok Tech Pyrex Aro Tank
- Status
Similar threads
