iClear 30S Problems

[Mr.travo]

So I bought a 30S a week ago and don't really care for it. I used my original iClear 30 for my coffee flavor and since I switched to the 30S it has seemed to wash out the flavor. I went through a tank, cleaned it, and refilled it again and after a few days it seems even more tasteless.

I also notice that it can't power vape just like the original 30.

I want to really like the 30S because it doesn't leak (at all), stays primed, and seems to hold the juice in the wicks. The only problem is that I am getting a fading flavor.

Anyone have any advice?

Thank you!


Sent from my tin can and piece of string

 

[83fxdg]

My 30s came with a 2.1 ohm coil and run it a 5 volts. Maybe the coil in your 30 is a lower ohm coil?

 

[djsvapour]

What battery are you using?

It needs lots of power to get it going well.

 

[Glenn_K]

Have you thought about trying a bottom dual coil clearomizer? Gravity rocks!

-- Glenn

 

[83fxdg]

What battery are you using?

It needs lots of power to get it going well.

I use a iclear MVP

 

[Tinkiegrrl]

You should have plenty of power for the 30s using an MVP. Try adjusting the settings to preference. From what I understand, the 30s isn't so different from the 30, so it could be that your 30s has a different resistance level (ohm level) then your 30.

Also, you may want to consider carto tanks for great flavor and very low maintenance. I switched from my iClear 16's, 30's, 30b's, mini protanks, etc to cartotanks from IBTanked and I've been in vape heaven with those and my MVP 2. Their 19mm tank is the same diameter as the iClear 30 clearo and looks great, plus you can get a custom paint job on the tank. IBTanked - Get Tanked With Us!

 

[djsvapour]

iClear should work well at the top end of the watt setting on MVP.

I would dearly love to get some IBTanks, but I fear I'll a) order the wrong thing and b) get mashed up by customs when it arrives in the UK.

I use all sorts, never rule anything in or out. (Apart from the big Protanks... LOL... )

 

[Mr.travo]

Yes, I am using a MVP 2. I like it around 8 watts. The 30S is running a 1.8 ohm.

I have been pondering about switching to a carto tank. I guess my only worry is how they hold together. Outside working all the time and don't need a few ML of juice on me. I saw the AGP+ locked which looked great bit read reviews and watched videos and people said that they are prone to leak. I guess I need to find a good one out there.


Sent from my tin can and piece of string

 

[Mr.travo]

Sorry, I mean AGR+


Sent from my tin can and piece of string

 

[djsvapour]

Sorry, I mean AGR+


Sent from my tin can and piece of string

I use AGR+

If you know what you are doing they don't leak.

 

[Mr.travo]

[Q UOTE=djsvapour;12019291]I use AGR+

If you know what you are doing they don't leak.[/QUOTE]

What is causing them to leak and what I the learning curve?

Thanks!

Travo



Sent from my tin can and piece of string

 

[djsvapour]

They leak when you have the wrong combination of holes, hole size and type of liquid.

 

[Mr.travo]

I run 70/30 PG/VG. Would that be a good juice?


Sent from my tin can and piece of string

 

[djsvapour]

I run 70/30 PG/VG. Would that be a good juice?

Perfect. For that thickness of Juice I would expect to use a pre-punched boge cartomizer (2 holes) without problems.

 

[Mr.travo]

Awesome! Going on order tonight! Thank you for your help.

Travo


Sent from my tin can and piece of string