IGO w6 issue

[BradMccullin]

Hello I recently purchased an IGO - w6 and I cannot get a reading of my ohm reader because the post at the bottom which connects to the battery is too short to reach, anyone else notice this issue and know a way I could possibly lengthen the connector or did a way around it?
P.S I can only get it workin on my mo by skrewing it down real tight which is probably related

 

[bussdriver]

All my igo products seem to have a fixed pin; can't be adjusted. For your ohmmeter, you might be able to screw a 510 to ego adapter into the ohmmeter connector first. Then screw on the igo. The adapter may help give a longer center pin length.

For the mod, does it have an adjustable pin? If not, a mod with an adjustable center pin would be in order.

 

[BradMccullin]

The mod doesn't adjust, but it's not a huge problem what sucks about that is the vape store workers told me te magneto mod would be perfect and I got that one, turns out not really, ego adapter didn't work, I ask because I just built the quad coil 10 wraps of 24g kanthal on it and rip tripper video says it should be .2 ohms but I do want to check

 

[Garym93]

I definitely wouldn't fire it obviously until you get a solid reading but maybe try GENTLY prying around the positive on the meter until it comes up far enough to make contact. Worked for me more than once.


Sent from my iPhone using Tapatalk

 

[BradMccullin]

What did you use to pry it? I can't quite get it

 

[BradMccullin]

How accurate do you think touching the meter with kanthal then touching the atomizer is?

 

[BradMccullin]

Well I tried just skrewing my atty on real tight (already a bad idea) and then got it stuck to my ohm meter, IGO w6 is the end of me

 

[Garym93]

I used a tiny screwdriver. The flathead end of one I got with a kayfun


Sent from my iPhone using Tapatalk

 

[BradMccullin]

Thanks for the help, even though I couldn't get it :/ I guess I learned IGO wanna get a new atomizer the extra few dollars is worth it