IgoL , how low can you go?

[jonathanxx]

So I have an igoL and I wonder how low can I go if my dripper is stock, I mean only the stock air hole , any one else went under .5?

 

[LowLyfe]

Depends how much airflow you can pull thru that small hole. How many ohms do you normally built it too.

Sent from my Samsung Galaxy S5 using Tapatalk Pro

 

[classwife]

Moved to Rebuildable Atomizer Systems from the Modding Forum - Atomizer mods

Modding Forum

The home of modders - the builders or modifiers of custom ecigs.

 

[NoMoreTequila]

I've got a 1.2ohm 28ga spring coil build that I love and been rewicking periodically for a month now. First with some pretty lame organic cotton and later with some pretty cool RAYON.

I'm wondering how long I can expect to rewick and enjoy this experience? Is the coil going to fail altogether or can I expect a drop in performance of some kind?

Love this cheap 'ol IGO-L.

 

[AzPlumber]

I'd be real careful not to melt that center pin isolator. I believe it is a silicon that gets pretty soft with a lot of heat.

 

[dopamine1]

So I have an igoL and I wonder how low can I go if my dripper is stock, I mean only the stock air hole , any one else went under .5?

Personally I wouldn't go under 1 ohm. It has like no airflow whatsoever and it will get HOT. I just use it like a super small RBA that has a .125ml capacity. Mostly use it for trying out new flavors and ones that I can't finish a whole tank of, not for clouds. Even at 1.4 ohms, mine gets pretty warm.

 

[jonathanxx]

Usually I don't go under 0.7 , under that it taste like burnt , there's not enough airflow on this dripper to go lower, I mean with the stock airhole.
Since then I got the igo w7 and its a totally different game.
I will use the igo l for when I just want to have a little vape.

 

[abrb701]

Ya I had to drill mine out immediately after my first 1.2 build, that hole is TINY, maybe I got a clone or mine was different, but mine was around the size of a sewing needle. Even at 1.2 the vape was pretty warm and not hitting effectively, Im pretty surprised you are at .5 with the stock airhole if it was the same as mine. My stock airhole was decently smaller than even the smallest single coil option for the trident.

 

[jonathanxx]

Ya I had to drill mine out immediately after my first 1.2 build, that hole is TINY, maybe I got a clone or mine was different, but mine was around the size of a sewing needle. Even at 1.2 the vape was pretty warm and not hitting effectively, Im pretty surprised you are at .5 with the stock airhole if it was the same as mine. My stock airhole was decently smaller than even the smallest single coil option for the trident.

Not 0.5 , its 0.7 the lower that I went.
But with 70%vg 30%pg juice.
I tried with 70%pg 30%vg juice and it was horrible.
The draw was hell tight but still its a good vape.
Better than any clearo and all that.

 

[abrb701]

Not 0.5 , its 0.7 the lower that I went.
But with 70%vg 30%pg juice.
I tried with 70%pg 30%vg juice and it was horrible.
The draw was hell tight but still its a good vape.
Better than any clearo and all that.

Is there a reason you don't want to make it bigger? I know some people prefer the small holes for mouth puffing

 

[jonathanxx]

Is there a reason you don't want to make it bigger? I know some people prefer the small holes for mouth puffing

I wanted to drill it but I don't have a drill and no need to buy one .I preferred dropping 35bucks for an igo w7 instead of at least 100 bucks for a drill

 

[abrb701]

I wanted to drill it but I don't have a drill and no need to buy one .I preferred dropping 35bucks for an igo w7 instead of at least 100 bucks for a drill

You can get a drill that can do what you need for much less than 100 but I get what you're saying. I've looked at the w7 myself but ended up going with the trident.

 

[jonathanxx]

You can get a drill that can do what you need for much less than 100 but I get what you're saying. I've looked at the w7 myself but ended up going with the trident.

The w7 is a beast IMO, only thing about it that I'm not too much a fan is the vertical coil, since it's made for vertical coils.
It's a bit tricky to do for me, but I will get the hang of it I guess.
Here's a video of how it Vapes http://youtu.be/c6MCRXww9DY

 

[abrb701]

The w7 is a beast IMO, only thing about it that I'm not too much a fan is the vertical coil, since it's made for vertical coils.
It's a bit tricky to do for me, but I will get the hang of it I guess.
Here's a video of how it Vapes http://youtu.be/c6MCRXww9DY

Ya that's funny I was just having this same discussion over in the IPV2 thread, I don't really like vertical coils either, that's why I went with the magma. I dunno, I might just hate verticals because I've only ever done them on a tiny fogger v4 deck, haven't had a need to try them anywhere else.