IJOY CAPO 100W Squonk Mod
- Thread starter Melita Hams
- Start date
- th_trl_thread_readers 0
- Status
I guess I get the GBox I really like to get a squonker as it help to reduce even the nicotine.
I got the G box kit and I can see a big difference between the capo and the G box.
Now I'm using the Radar on the Capo Squonker with dual coils of 0.65 ohms (total) 28g kanthal wire, 6 turns and 3mm inner diameter as it was easier to build with the 28g on it as it have smaller holes unlike the Drop .
I'm now facing 2 problems on the Drop ,why is it that even with 0 nicotine I'm still having big throat hits and I start to cough? I used 24g kanthal A1 wire with 9 wraps and 3.5mm inner diameter Dual coils as well. I changed two different liquid brands and still same. Am I doing something wrong? Now I did removed one coil from the Drop and come to.98 ohm.
Now I'm using the Radar on the Capo Squonker with dual coils of 0.65 ohms (total) 28g kanthal wire, 6 turns and 3mm inner diameter as it was easier to build with the 28g on it as it have smaller holes unlike the Drop .
I'm now facing 2 problems on the Drop ,why is it that even with 0 nicotine I'm still having big throat hits and I start to cough? I used 24g kanthal A1 wire with 9 wraps and 3.5mm inner diameter Dual coils as well. I changed two different liquid brands and still same. Am I doing something wrong? Now I did removed one coil from the Drop and come to.98 ohm.
I'm using 30 watts or less as if I put more I feel it worst. So what builds should I do ?
I have kanthal A1 wire gauge 20, gauge 24 ad gauge 28. Then I have SS 316L gauge 24.
Cotton I have cotton bacon and cotton giant.
I cannot understand now is a 0.3/0.5 ohm coil less stronger than 0.65 ohm coil? All I understand is the lower the ohm is the stronger it will be hope I'm not confusing everything now.
Note the distance of the coil to the airflow holes. To "properly" use it, you need a real fast and non-stop draw to cool the coils down, especially at high wattage, or you'll get that bad "throat hit" (ok...a dry hit).
To fix: Loosen the screws and push the coils closer to the air holes. The closer the better especially if you do slow DTL.
Hope this helps.
Start with your dual 0,5ohm hive coils. That should give you a vaping max power of 70 watts with your Capo's available voltage (4.2volts),
I'm using the Drop on the GBox as I find it better and the Radar on the Capo
. I get how to inhale and got tons of vape its amazing
- Status
Similar threads
