The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.
  1. Hi Guest! 

    Seasons Greetings. Just to let you know that a new giveaway has just started. 

    This one's from our friends at Humble Vape Co. and I hope you'll take part for a chance to be one of the ten winners of their great prizes. 


    See our giveaway page for full details. This one's for US residents only. 

    Good luck! 


    Dismiss Notice

Ijoy Maxo Zenith Issue

Discussion in 'VV/VW APV Discussion' started by N_vj5497, May 19, 2017.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. N_vj5497

    N_vj5497 New Member

    May 19, 2017
    Hi, this is my first post here, although ive read threads here and elsewhere many times. I usually dont do the forum/blog stuff, but ive been pushed by heartbreak and failure. I recently bought the Ijoy Maxo Zenith from FT, and it works great, i love it. Until this morning. I was puffing iton my break at work, i handed it to my friend who is considering dropping cigs for a vape, and he hit it. Everythings ok. Then he goes to hit it a 2nd time and the lights flash and it turns off. Ok, i take it and click it 5 times to turn it back on. Only it doesnt come on. He didnt do anything, i was litteraly watching as it happened. Ive taken it apart and cleaned the juice out of the button, around the board, etc. But it still wont come on. The lights briefly flash green once when i put the batteries in, but it wont do anything other than that. (the lights are supposed to flash green 5 times on battery insertion, and the single blink is far shorter than one normal flash) Does anyone have any idea as to what may be going on? Im desperate, im in love with this one, its my favorite mod ive ever touched. Im no novice, but i cant spot any bad wires, the terminals are clean, the board looks fine to the eye, the button is clicky and making contact. Its not my batteries theyre near new HG2s and they work in my other mods still. None of the safety features went off, the lights are supposed to flash red 3, 5, or 10 times if so. I have dropped it once, but that was a month ago? And barely a 1' fall? Its worked fine until now. The warranty isnt out yet, but FastTech is sooo slow, if i can fix it my self, i want too. Ive always fixed my vapes myself. I had a Smok X Cube 2 that did the same thing, but i got a new mod shortly after and never bothered to fix it. Ive read so many things on here that have heloed me before, im hoping someone can help me now.
    I repeat, Im desperate, im in love with this one, its my favorite mod ive ever touched!!!
    Sorry for the long post btw..
  2. T0mmy1977

    T0mmy1977 Super Member ECF Veteran

    Mar 1, 2015
    Contact iJoy's tech support. I have this mod and love it!
  3. Fakol

    Fakol New Member

    Jun 1, 2017
    My friend i have the same problem, did u fixed it ?
  4. N_vj5497

    N_vj5497 New Member

    May 19, 2017
    Yes i did actually, but you may be hesitant to try it.
    However, this is the 2nd mod i have fixed like this.
    I took out the battery sled and seperated the contacts from it (make absolutley sure you put them back how they were when you're done) then rinse it out well with 90%+ iso alcohol to wash away every bit of juice. I used a 10 ml syringe so i could lightly pressure wash it, making sure to get behind the board too (which is easier to do if you remove the side vent plates and shoot it sideways in there)
    Wipe any dirty contacts gently a few times with a qtip wetted with the iso.
    Then here comes the scary part..
    Put it in the oven on as low as possible for 5-10 mins to evaporate the alcohol so it doesnt sit on the glue, and to shrink the wire wraps alittle around any weak connections. I noticed in the first place the wraps were definitely a little loose on the wires.
    This most definitely will void your warranty from ijoy or fasttech, they both say any maintenance/alteration/work-in-general on your mod that is not done by IJOY voids your warranty. However using any atty not made by IJOY also voids the warranty sooo... But how would theu know what tops you put on? Also i didnt see any water damage markers or any differnce at all before and after color or shape wise.
    In the end its up to you to decide what to do.
    I swear it worked (twice now for me)
    Im actually hitting it as i type this.
    Not so much as a single malfuction since.
    Just dont forget about it in there, and make sure to remove the battery sled so it doesnt warp.
    • Like Like x 1
  5. N_vj5497

    N_vj5497 New Member

    May 19, 2017
    Dont call me crazy either, the vape shop guys did that and said noone should ever do that blah blah blah, we know everything there is to know. But then again theyve busted quite a few mods and tell me they always just get another. Ive yet to truly lose a mod, and i do all sorts of tinkering.
    If you think its crazy then dont do it. If you're likely to forget that its in the oven, dont do it. If you dont think you can remember how the contacts go back in, write it down, map it out, snap a pic, or just dont do it. If youve lost all hope and want it working again, do it (;
  6. Fakol

    Fakol New Member

    Jun 1, 2017
    Hmm i think the problem is mine is that my batteries cant charge , so i bought another charger and i wait to see what ill happen , and my friend can you tell me what happens if ur batteries are not charged enough ? i mean what does the mod does ? Beeps red 10 times ???
    Thanks :D
  7. N_vj5497

    N_vj5497 New Member

    May 19, 2017
    When its almost dead <30% the vutton light will tirn half green half orange then when its dead it should flash just red when its less than 7.5v i think
  8. Fakol

    Fakol New Member

    Jun 1, 2017
    Alright tabks a lot , i iwll post on 3 weeks when my charger and batteries come . I will tell u my result ;)
Thread Status:
Not open for further replies.

Share This Page