Improve Throat Hit?

[hydruid]

I have had an igo-w for a few months and have been struggling to get a good throat hit.

I've built micro coils from 1.4 to 1.8 ohms, used various amounts of cotton, and tried different air hole positions (also tried putting tape over one of the air holes).

I'm using a zmax mini, single coil, drilled air holes to 1/16th, and take 5-7 second long drags. I make my own juice at 70/30 12mg. The bottom of the coil is aligned with the top of the air hole and is very close to the edge.

What am I missing?

Sent from my SCH-R530U using Tapatalk

 

[TrolleyVW]

Maybe try taking the coil away from the airholes more? Everything else sounds ok if you don't want to change anything drastically like lowering resistance and buying an unregulated device.

 

[hydruid]

Maybe try taking the coil away from the airholes more? Everything else sounds ok if you don't want to change anything drastically like lowering resistance and buying an unregulated device.

I will give that a try. How far? 1/4 away from edge, 1/3, 1/2?

Sent from my SCH-R530U using Tapatalk

 

[hydruid]

I left the coil as is, which is the closest I've ever had it to the air hole, and moved the cap to where I finally got that throat hit I needed!

 

[vampyrex13]

Raising the coils higher off the deck is supposed to help with throat hit as well. Going quad coil will also produce throat hit.

 

[tobarger]

Moving the coil in relation to the air inlet effects TH/FLAV and Vapor
Closer to air inlet = Less TH/FLAV More Vapor
Further from air inlet = More TH/FLAV Less Vapor