Increasing my air draw

[Infinitejest]

Hey all,
i was wondering if anyone had tips or suggestions on increasing my air draw on my Procari. If it helps I use boge carts with phiniac standard size tanks. Thanks in advance for any help. Also does anyone find advantages to punching twice in the carto?
IJ

 

[rondasherrill]

I notice you have asked this question about the Reo also. This leads me to believe it is not in fact an issue with the Provari. One way you can increase airflow is to take a 1/16th" drill bit, and slightly widen the air holes on the bottom. If you look at the connector, just above the threads, you will see 2 small holes. Those provide airflow. Just well them out a bit.

 

[Infinitejest]

Rondasherill,mthanksmfor the advices! Are you talking about the connector on the Provari are carto? Thanks for the quick reply
IJ

 

[rondasherrill]

Rondasherill,mthanksmfor the advices! Are you talking about the connector on the Provari are carto? Thanks for the quick reply
IJ

The connector on the carto.

 

[skilow]

Punch more holes on the Carto

 

[Infinitejest]

Punch more holes on the Carto

Really appreciate the advice. Could you tell me how I can like your advice. Wanto to show my appreciation ., still a newb

 

[AuBadge]

A "Like" link should be visible at the bottom right of any post box. Just click on it.

 

[SABOTEUR]

This question may be tank and/or carto specific, but I'll shoot anyway...

I use Boge 3.0s (2 hole punched) with my Liquinator (3ml). On some cartos I find the air flows better if I loosen the tank slightly. Sometimes it's threaded onto the Provari in such a way that the bottom holes are blocked. What's weird is, I should have to do this with every carto, but I don't.

Another thing I've noticed is the air flows better as the volume of juice within the Liquinator decreases, so I never fill the tank more than halfway now.

 

[VegasVaporz]

Also, make sure your tank is not sitting directly on your top cap of your provari. Make sure there is a little gap between the top of the provari and the bottom of the tank. This is more than likely the issue.

 

[SABOTEUR]

Could you tell me how I can like your advice. Wanto to show my appreciation ., still a newb

If you're using Tap-a-talk you won't find a "like" option for this forum.