Inexpensive DIY Starter Kit

Status
Not open for further replies.

stealthmayhem

Super Member
ECF Veteran
Verified Member
May 17, 2013
549
544
Dover, Delaware, United States
I started vapin a little over a week ago and want to get into DIY for the cost savings. I have been scouring the forums for day and looked at over 1000 threads trying to find information on where to purchase an inexpensive DIY kit. Some people say buy from this vendor, others from that vendor, and still more say that they are a waste of time and to piece together a kit of your own.

So I am asking; Who, what, and how much?

Another question: double dose I know (two questions on the same thread, but I swear they are related)-- I am looking for a flavoring sample pack (preferably super-concentrated)- a bunch of smaller size flavor sample to find my fave. Any ideas? Same as above, who, what, and how much?
 

Red_Bird

Moved On
Apr 11, 2013
1,237
1,095
Montgomery County, NY
Wizard Labs Order

120ml of 48 or 60 mg nicotine in PG
250ml of PG
250ml of VG
WL flavorings are about $1.50 each (pick up 15-20 to start)
ONE MIL syringe (pick up TEN) use these to measure flavorings
TEN MIL syringe (BUY TWO) use these to measure PG, VG and nic
18 gauge Luer Lock blunt tip needles- put these on ONE MIL syringes
14 gauge Luer Lock blunt tip needles- put these on TEN MIL syringes
15 mil plastic bottles (buy 6)
30 mil plastic bottles (buy 6)

Use cheap latex gloves if u want, pick up distilled water to rinse your syringes out well at WALMART by the gallon 88 cents)

This will get u started
 
  • Like
Reactions: Foggy Road

psycheval

Senior Member
ECF Veteran
May 12, 2013
223
82
Forget
Wizard Labs Order

120ml of 48 or 60 mg nicotine in PG
250ml of PG
250ml of VG
WL flavorings are about $1.50 each (pick up 15-20 to start)
ONE MIL syringe (pick up TEN) use these to measure flavorings
TEN MIL syringe (BUY TWO) use these to measure PG, VG and nic
18 gauge Luer Lock blunt tip needles- put these on ONE MIL syringes
14 gauge Luer Lock blunt tip needles- put these on TEN MIL syringes
15 mil plastic bottles (buy 6)
30 mil plastic bottles (buy 6)

Use cheap latex gloves if u want, pick up distilled water to rinse your syringes out well at WALMART by the gallon 88 cents)

This will get u started

All that and only thing I'd add is get more bottles. If you get 6 and think that will be enough get 12 more. You can't get enough bottles. What Red put in there is almost identical to my first order.
 

psycheval

Senior Member
ECF Veteran
May 12, 2013
223
82
Forget
I'm waiting on my first order from WL. I spent about 60$. I'm pretty sure I've gotten enough stuff to last me quite a while with my current habit though. lol

Remember you thought that after you spend $60 or so a couple more times because you realized you still don't have enough of something. I've been adding to that original order for 5 months! And bought a bunch of stuff local before I made that order! Lol!
 

stealthmayhem

Super Member
ECF Veteran
Verified Member
May 17, 2013
549
544
Dover, Delaware, United States
Thanx for all the advice. One issue that i am running into right now is that there is not a B&M store selling anything related to vaping for hours around here. I have to order everything online. I am a very tactile person. Before I buy something I like to look at it, pick it up, get a general feel for the item. That is impossible in my current situation. That is why I have to rely on the people here!
 

ScandaLeX

ECF Guru
ECF Veteran
Verified Member
Aug 6, 2013
12,893
58,154
PhiLLy
I realize this is an old thread but it's the closest that answers questions I had for the exception of one.
If my current mg of choice is in my ejuice is 12mg or lower, why is it necessary to purchase 120ml of 48 or 60 mg nicotine in PG when it's available in 12mg?
Is there are reason to get that high a nic strength?

This is pretty much the only thing I need clarification on before placing my 1st DIY order.


Thanks!
 

DasBluCig

Ultra Member
ECF Veteran
Verified Member
Jul 30, 2013
1,450
3,584
Chichester, NH
I realize this is an old thread but it's the closest that answers questions I had for the exception of one.
If my current mg of choice is in my ejuice is 12mg or lower, why is it necessary to purchase 120ml of 48 or 60 mg nicotine in PG when it's available in 12mg?
Is there are reason to get that high a nic strength?

This is pretty much the only thing I need clarification on before placing my 1st DIY order.


Thanks!
If you're aiming for a TOTAL JUICE NIC CONTENT of 12mg....if you USE 12mg Nic liquid IN THE MIX.....you'd have to use 100% nic !!
If you haven't done so already....download an e-juice calculator -- there are many --- one of the more popular is EjuiceMeUp...
You simply fill in the necessary spaces.....Target nic level, total juice quantity, VG/PG ratio, etc. -- and the calculator gives you amounts for each substance...
Think RATIOS!!! If you're shooting for,say, 15ml of juice and want 24mg/ml total nic content.....using 100mg/ml nic base, it's 24% of the TOTAL PRODUCT (15ml).....so 15 X .24 = 3.6ml of nic base...
It sounds more complicated than it really IS.....If you use 100mg/ml base, everything is divisible by factors of 100....
Probably why the 100mg/ml nic is always OUT OF STOCK everywhere!!;)
Play with one of the juice calculators....plug in some arbitrary figures to see how it works!!
Good Luck!
Happy (vaping) Trails!
 

kineard

Full Member
Oct 14, 2013
26
7
Panama City, FL
I like loranns watermelon, keylime, strawberry and many others. You can get many of these from hobby lobby.
I get my extracts, pg and vg from ktorisEcigs.com. Little know secret I guess because they always have nicotine in stock unlike wizard labs and the prices are comparable. Maybe a little less on the nic and much less on the pg and bg and they have free shipping on top of it. They say everything is USP including the nicotine. I look for USP nic because I have got nicotine that smells like pesticide.
 
Status
Not open for further replies.

Users who are viewing this thread