Innokin SVD technical question

[Mouseshooter]

I have an SVD that is having issues. I can not change the power or voltage level settings. The unit powers on and off. I can lock and unlock it. I can change between power or voltage. All buttons feel normal. The power button light works normally. It fires normally.

 

[bryman021]

I have the SVD also and find that sometimes I experience the same thing. Everything works fine except it won't change the voltage or wattage. I end up getting it to "unlock" by repeatedly going thru the unlock sequence: hold + and - for 5 seconds. Sometimes when I'm doing the unlock sequence the current setting shows on the screen and then it magically lets me change the setting right then(without holding fire & +).

I love the SVD but its kinda wonky sometimes trying to set it up. It always fires reliably though.

 

[Vikaernes]

Same here, I cannot for the life of me figure out how to reliably get it to unlock and adjust voltage the first try. I have to keep trying and trying to get it to unlock. Seems a very poor control scheme.

 

[KenD]

I've experienced that when I've had a coil suddenly break (causing an open circuit, triggering the SVD's safety features). Resetting the device has worked for me in those cases. Take out the battery, press and hold the fire button for 5-10 seconds.

Sent from my GT-I9100 using Tapatalk

 

[ThePaladin]

I've experienced that when I've had a coil suddenly break (causing an open circuit, triggering the SVD's safety features). Resetting the device has worked for me in those cases. Take out the battery, press and hold the fire button for 5-10 seconds.

Sent from my GT-I9100 using Tapatalk

+1

I used to get the same thing switching from 1 18650 to 2 18350's, and that solved it. Seems like I missed that part when perusing the owner's manual.

 

[Mouseshooter]

Thank you all!! Ken: you're suggestion worked! Bless you. My SVD and I thank you! Tak!