Introducing Futura - The Modular DNA 20 APV by NexgenVapor[ISSUE]
- Thread starter LeftCoastVaper
- Start date
- th_trl_thread_readers 0
- Status
I can't wait!!! This coming week! I suspect later in the week rather than earlier. I think I'm within the first 100 & I opted for the titanium finish so it should be among the first batch to go out!
I'll post pic's up the wazoo for y'all!
I'll post pic's up the wazoo for y'all!
I too am excited even though I know I have to wait just a bit longer since I got the 510 only cap. It's almost here ^_^. I'm just stoked to have a VW device so that I dont have to adjust settings every time I swap my rebuildables.
He posted like 1-2 days ago that they will start shipping next week. He specified which colors/top caps will be shipping first. Asking questions which have already been answered is quite annoying.
short week for the feds holiday monday maybe some of yall will get yours by the end of the week for the ones like me that like a little color in their life will have to wait so show us the pics and i expect yall to rub all of its awesomeness in your reviews in my face or i will be dissapointed just dont grab and run thats not cool lol
I ordered the titanium, with 22mm ego+510 (I liked the look of the 21mm, but I have too many 22mm toppers that I want to look flush). My invoice number was in the 1900 range so I'm guessing I have a while to wait? I think I pre-ordered about 5 weeks ago!?
I'd been waiting for a DNA20 tube mod that wasn't telescopic (dunno why, hate how telescopics look.). Didn't really feel like waiting for a possible chance to get a Wizard, not to mention its twice the price of the Futura. I saw the Futuras at the beginning of one of Busardo's videos and pretty much went at pre-ordered it once I figured out what it was.
I'd been waiting for a DNA20 tube mod that wasn't telescopic (dunno why, hate how telescopics look.). Didn't really feel like waiting for a possible chance to get a Wizard, not to mention its twice the price of the Futura. I saw the Futuras at the beginning of one of Busardo's videos and pretty much went at pre-ordered it once I figured out what it was.
And I just ordered a new toy for my futura, the last UVO Aquos. I got the last one from newportvapor but I saw they're still in stock at vapedoctor. Supposed to be better than a KF, only prob in my eyes is 21mm but whatever.
Here is a picture of the Futura prototype which was on display at VaperCon last week.
It's set up with the contour cap and a Russian 91% built with a 1.5 ohm micro coil and cotton wick. We cranked it up to 20 watts while vaping Moon Mountain Vapor Tranquility Trauma at 6mg.
This setup produced an INSANE amount of vapor, flavor and throat hit.
We really loved the heft and form of the Futura. The finish is very nice and the device performed extremely well at all wattage settings.
The Futura is definitely worth the wait.
It's set up with the contour cap and a Russian 91% built with a 1.5 ohm micro coil and cotton wick. We cranked it up to 20 watts while vaping Moon Mountain Vapor Tranquility Trauma at 6mg.
This setup produced an INSANE amount of vapor, flavor and throat hit.
We really loved the heft and form of the Futura. The finish is very nice and the device performed extremely well at all wattage settings.
The Futura is definitely worth the wait.
Last edited:
My only gripe which might not be the case with the final release is the very visible phillips screw beside the screen. I ordered the Titanium finish partly because I didn't want the screw to be so obvious, also because all my vaping stuff is stainless/silver looking. Not into those new fangled colours that everyone is talking about 
heh.. I wonder if it might look nicer if NexGen used a security screw of some type, or a hex/torx instead of the phillips. Just so it isn't like *Pow, in your face screw*.. I dunno, whatever. Still much easier than trying to get and pay for a Wizard.
heh.. I wonder if it might look nicer if NexGen used a security screw of some type, or a hex/torx instead of the phillips. Just so it isn't like *Pow, in your face screw*.. I dunno, whatever. Still much easier than trying to get and pay for a Wizard.
My only gripe which might not be the case with the final release is the very visible phillips screw beside the screen. I ordered the Titanium finish partly because I didn't want the screw to be so obvious, also because all my vaping stuff is stainless/silver looking. Not into those new fangled colours that everyone is talking about
You guys... We tried a bunch of different screws, including torx, hex, etc. and none of them seemed quite right. Either we couldn't get them to fit flush or the counter-sink was off somehow. So we settled on the phillips as the least bad option. This screw is necessary for aligning the board with the tube so it's non-negotiable.
But, to cheerier topics, everything is actually on schedule so far, and we will, as promised, begin shipping this week. As a reminder, black and titanium go out first, everything else to follow shortly thereafter.
My thanks to Jim Bowen of Moon Mountain Vapor for posting the pic. Remember, that's a contoured top cap upon which the Russian sits, so if you ordered the inclined or 510-only you'll achieve a flusher fit with 22mm attys. On the other hand Ego attys, as well as the smaller diameter tanks, look awesome with the contoured caps, so if those are your burners of choice you'll be very pleased.
Phil Busardo will have one by the end of the week, so he'll be doing a review soon.
Any chance that in the future you may offer beauty rings for the device so that tanks will fit flush? I ended up going with the contoured cap since I have both 19mm and 22mm tanks-but not sure either is going to look very flush. I have been looking for a new tank to use with my new futura but haven't a clue which type will look the best. Any suggestions folks???
OK, here is a picture of the Futura with the contour top cap with a Kanger ProTank 2 mounted. This should give you guys a better idea of the fit.
Here is a picture of the Futura prototype which was on display at VaperCon last week.
It's set up with the contour cap and a Russian 91% built with a 1.5 ohm micro coil and cotton wick. We cranked it up to 20 watts while vaping Moon Mountain Vapor Tranquility Trauma at 6mg.
This setup produced an INSANE amount of vapor, flavor and throat hit.
We really loved the heft and form of the Futura. The finish is very nice and the device performed extremely well at all wattage settings.
The Futura is definitely worth the wait.
Is it just me or does 1.5ohms @6.6v=29.039watts
Nice, thank you for info and pics. I'm looking forward to more info as they become more available.
It's just a blurry picture, I'm good with pixels so I could tell it was 5.5v lol
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
- Status
Similar threads
