[h=2]
Is my Ego Spinner going to blow up?[/h]

I need some help from the ECF experts. My Ego Spinner ("technically" not a Vision Spinner) is scaring me! It keeps flashing and if a clearo is on it, fires intermittently. (so I removed the clearo).
i cannot "5 click" it off, is it going to catch fire or anything? It's currently residing In a coffee container on my front walk, away from my house...just in case. This is how it started:
two nights ago, the button flashed, as if it needed to be charged. I guess it was relatively appropriate time wise, so I put it on the charger. After about an hour, the charger read green...it usually takes a bit longer than that. Now here's the problem: THE LIGHT KEEPS BLINKING! I can not "5 click" it off. I put a clearo on it and it wouldn't fire...then it did WITHOUT pressing the button. After a little while, the light stopped flashing, so I used a multimeter, and it showed "0 volts". Bummer, it's dead!
Then, like something out of a Stephen King novel, the darn thing rises from the dead, and starts to spontaneously blink at me! I check it with a multimeter, and it's reading anywhere from 1.99 to 3.4 volts!
Then, it's dead again.
How long will it take to drain? Is it dangerous?
i've read that sometimes the MOSFET switch can be reset by putting it on the charger again?
Can I salvage this bAttery? Or should I dunk it in salt water to deactivate (neutralize) the charge?
could it be a short that can be fixed? How?
thanks in advance for your help!
P.S. my vendor has already generously sent out a replacement, as it should not have failed in such a short time. These guys are great!
i cannot "5 click" it off, is it going to catch fire or anything? It's currently residing In a coffee container on my front walk, away from my house...just in case. This is how it started:
two nights ago, the button flashed, as if it needed to be charged. I guess it was relatively appropriate time wise, so I put it on the charger. After about an hour, the charger read green...it usually takes a bit longer than that. Now here's the problem: THE LIGHT KEEPS BLINKING! I can not "5 click" it off. I put a clearo on it and it wouldn't fire...then it did WITHOUT pressing the button. After a little while, the light stopped flashing, so I used a multimeter, and it showed "0 volts". Bummer, it's dead!
Then, like something out of a Stephen King novel, the darn thing rises from the dead, and starts to spontaneously blink at me! I check it with a multimeter, and it's reading anywhere from 1.99 to 3.4 volts!
Then, it's dead again.
How long will it take to drain? Is it dangerous?
i've read that sometimes the MOSFET switch can be reset by putting it on the charger again?
Can I salvage this bAttery? Or should I dunk it in salt water to deactivate (neutralize) the charge?
could it be a short that can be fixed? How?
thanks in advance for your help!
P.S. my vendor has already generously sent out a replacement, as it should not have failed in such a short time. These guys are great!