Is this mosfet good ?

[Kaana]

Hey guys,

That IRLB3034PbF not avaliable for me atm.

But I found something in local looks similar.

So is this mosfet good for paralel 25r or vtc4 mod ?

MOSFET, N, 40V, 280A, TO-220
Transistor Polarity:N Channel
Continuous Drain Current Id:280A
Drain Source Voltage Vds:40V
On Resistance Rds(on):2mohm
Rds(on) Test Voltage Vgs:10V
Threshold Voltage Vgs Typ:4V
Power Dissipation Pd:330W
Transistor Case Style:TO-220AB
No. of Pins:3
SVHC:No SVHC (18-Jun-2012)
Current Id Max:270A
device Marking:IRF2804PBF
Junction to Case Thermal Resistance A:0.45°C/W
On State resistance @ Vgs = 10V:2.3ohm
Package / Case:TO-220AB
Power Dissipation Pd:330W
Power Dissipation Pd:330W
Pulse Current Idm:1080A
Voltage Vds Typ:40V
Voltage Vgs Max:4V
Voltage Vgs Rds on Measurement:10V


Thanks

 

[david4500]

Threshold Voltage Vgs Typ:4V

This value is higher than what would be suitable. VGS TH is when the mosfet will begin to turn on. It needs to be lower than the minimum charge of your batteries, so less than 3v (2.5v or less would be good). If you use batteries in series, they'll be higher than 4v through out their whole voltage range so this mosfet would be suitable for that.

If going with a parallel battery configuration, I would use this mosfet:

PSMN1R9-40PLQ NXP Semiconductors | Mouser

 

[Kaana]

This value is higher than what would be suitable. VGS TH is when the mosfet will begin to turn on. It needs to be lower than the minimum charge of your batteries, so less than 3v (2.5v or less would be good). If you use batteries in series, they'll be higher than 4v through out their whole voltage range so this mosfet would be suitable for that.

If going with a parallel battery configuration, I would use this mosfet:

PSMN1R9-40PLQ NXP Semiconductors | Mouser

So I'll have a look then come back.
Thank you, appreciate it friend

 

[Uncletattoowhat]

the mosfet is in stock on mouser.

IRLB3034PBF International Rectifier | Mouser