iTaste CLK Sport Questions

[caseysch42]

Hello, New here to the forum. Whats going on?

That said. I have an iTaste CLK Sport 1280

I was gifted this unit a month ago, new in the packaging. I'm not sure yet if I have to take any action with the warranty yet. I'm trying to find out why it is not working. This thing is so new, that I don't think that there is a problem with the battery, however, when looking through the manual, I didn't see any LED indication info on when to know when the battery is dead. The light turns green when plugged in, and eventually turns off. The device is not off (I click three times quickly), yet nothing happens when my tank is securely attached to the battery as far as the indicator goes. When I have the battery plugged in, and I try to take a drag All three lights blink simultaneously, and stops after one cycle.

One more thing to mention, my tank works on other batteries.

I didn't see anything about this in prior threads. Any professionals, or people that have had this unit before that might know whats going on?

 

[suprtrkr]

I don't have that machine, so I can't answer. Do you have a manual or can you download one? If so, see what all the LEDs flashing means. It could be the tank is simply not making contact and the machine thinks it doesn't have one. Hopefully somebody with that mod will be along in a minute and can answer better than I have done. Welcome to the board.

 

[caseysch42]

I don't have that machine, so I can't answer. Do you have a manual or can you download one? If so, see what all the LEDs flashing means. It could be the tank is simply not making contact and the machine thinks it doesn't have one. Hopefully somebody with that mod will be along in a minute and can answer better than I have done. Welcome to the board.

The first thing I did was try with two other tanks I have, with no luck. Then I tried to raise the center pin of the battery, no luck there either

I have the manual that came with the device, as well as an updated pdf document from the manufacturer.

I'm at a loss

 

[Coastal Cowboy]

I took a look at the manual too, and I didn't see anything to cover what you described.

Try pressing the fire button with no tank attached. If the same thing happens, it's gotta mean a problem establishing a connection with the tank.

 

[stols001]

I don't own this mod either but it could be a connection issue. If you can take it to a B&M with knowledgeable staff, they may be able to help you figure out what's going on, but it's good to know the warranty option is available to you. Someone with the mod may be along to help you troubleshoot!

Good luck,

Anna

 

[BrotherBob]

The first thing I did was try with two other tanks I have, with no luck. Then I tried to raise the center pin of the battery, no luck there either
I have the manual that came with the device, as well as an updated pdf document from the manufacturer.
I'm at a loss

Welcome and glad you joined.
Looks like you are doing nothing incorrectly assuming that you have a clean metal to metal contact between the battery pin and tank.
Could contact:
Local B&M Vape Shop -----Might be simple.
Vendor who sold it ---see if they will repair or replace or advise (any authorized distributor).
Manufacturer contact ---see if they will repair or replace or advise.
INNOKIN 90-DAY LIMITED WARRANTY PROGRAM - Innokin
Not sure where your at: California residents: Failure to complete and return the product registration card does not diminish your warranty rights.
On the top right hand corner of this post you will find --"your name" next to "Inbox and Alerts"
Place the mouse pointer on your name. You will get a drop down and on the left hand side of this drop down you will find "Personal Details".
Click Personal Details.
In Personal Details, in middle of screen in gray, you will find "Location" Could fill that box line in.
re: New users - Put your location in your Profile...