Itaste MVP 2 vs VV4

[Nocturne31]

Hey

I'm currently using an Itaste MVP 2 and it's all cool and dandy

My only issue is that it looks way too awkward in public!

I was looking at the Itaste VV4 and it looks quite good. Mainly because of how convenient it would be, given that it doesn't look like I'm trying to establish a connection with someone on Mars (as is the case with my MVP 2)

So my question is, will my throat hit or flavour suffer with the VV4? I ask because it has a 1000mah battery whereas my current one has a 2600 mah battery. If I only change to the VV4 battery, but keep the same tank and everything else, will I notice a difference? Sorry I realise this is something I should know by now lol

Thanks in advance

 

[tehdarkaura]

Hey

I'm currently using an Itaste MVP 2 and it's all cool and dandy

My only issue is that it looks way too awkward in public!

I was looking at the Itaste VV4 and it looks quite good. Mainly because of how convenient it would be, given that it doesn't look like I'm trying to establish a connection with someone on Mars (as is the case with my MVP 2)

So my question is, will my throat hit or flavour suffer with the VV4? I ask because it has a 1000mah battery whereas my current one has a 2600 mah battery. If I only change to the VV4 battery, but keep the same tank and everything else, will I notice a difference? Sorry I realise this is something I should know by now lol

Thanks in advance

the VV4 does 15 watts and your MVP2 only does 11 -- so you are not going to notice a drop in performance -- you will notice the battery dies much quicker -- especially if you decide to turn the wattage up

 

[Nocturne31]

Thank you. So the battery has nothing to do with the Throat Hit and flavour? Also how does a simple Ctwist differ from an MVP 2 in terms of flavour and TH if I remain on 3.9 volts (which I do)? If both provide 3.9 volts

 

[amoret]

Hey

I'm currently using an Itaste MVP 2 and it's all cool and dandy

My only issue is that it looks way too awkward in public!

I was looking at the Itaste VV4 and it looks quite good. Mainly because of how convenient it would be, given that it doesn't look like I'm trying to establish a connection with someone on Mars (as is the case with my MVP 2)

So my question is, will my throat hit or flavour suffer with the VV4? I ask because it has a 1000mah battery whereas my current one has a 2600 mah battery. If I only change to the VV4 battery, but keep the same tank and everything else, will I notice a difference? Sorry I realise this is something I should know by now lol

Thanks in advance

I have both (and the VV v3 - still my favorite) and except for the VV4 working at higher wattage, they are identical as far as the quality of the vape. The difference in mah of the battery will only affect how much it can be used between charges. You would have to recharge the V4 sooner than you would the MVP. Which is the only reason I use the MVP - oddly enough for when I'm out and about. Because of where I live I end up doing all my appointments and errands on one day, and it is nice to not have to worry about recharging.

 

[tehdarkaura]

Thank you. So the battery has nothing to do with the Throat Hit and flavour? Also how does a simple Ctwist differ from an MVP 2 in terms of flavour and TH if I remain on 3.9 volts (which I do)? If both provide 3.9 volts

the supported wattage is the most important thing to know to tell if its not going to be enough for you -- so if you know what ohm you tank coils are I can help you figure out what wattage you use since you know the voltage -- then when shopping for a new mod just make sure it can do at least that much wattage.

 

[Nocturne31]

the supported wattage is the most important thing to know to tell if its not going to be enough for you -- so if you know what ohm you tank coils are I can help you figure out what wattage you use since you know the voltage -- then when shopping for a new mod just make sure it can do at least that much wattage.

Thank you I'd really appreciate that. I use a 1.5 ohm EVOD 2 dual coil and my sweet spot is 3.9 volts

 

[Nocturne31]

I have both (and the VV v3 - still my favorite) and except for the VV4 working at higher wattage, they are identical as far as the quality of the vape. The difference in mah of the battery will only affect how much it can be used between charges. You would have to recharge the V4 sooner than you would the MVP. Which is the only reason I use the MVP - oddly enough for when I'm out and about. Because of where I live I end up doing all my appointments and errands on one day, and it is nice to not have to worry about recharging.

So you have both MVP 2 and VV 4? That's awesome. If the charging is the only downfall then it shouldn't be a problem for me. Thank you!

 

[tehdarkaura]

10.14 watts and 2.6 amps -- that should be easy to find

Ohm's law | Steam Engine | free vaping calculators

 

[Nocturne31]

View attachment 456069

10.14 watts and 2.6 amps -- that should be easy to find

Ohm's law | Steam Engine | free vaping calculators

Wow are you sure this is accurate? That's one away from 11 which is the max on my MVP... How is that possible when I vape on 3.9 volts out of a 5.0 volts maximum? I would've thought that 4.9 volts would be equal to that lol

 

[tehdarkaura]

yup pretty positive the numbers are accurate -- switch to wattage mode and see if 10 Watts is pretty darn close to what your used to at 3.6 volts?

 

[Nocturne31]

yup pretty positive the numbers are accurate -- switch to wattage mode and see if 10 Watts is pretty darn close to what your used to at 3.6 volts?

Lol I just did... The 3.9 volts is a lot stronger than the 10.5 watts... How can that be lol unless it's the harshness of the vv that I'm used to and if vw is smoother

 

[tehdarkaura]

hmmmm interesting -- well I guess they might just dump you set voltage out in voltage mode and the watt limit doesn't come in to play there...... or their measure of watts isn't very accurate -- but kind of weird they would set a hard limit on their watts without a need to -- not sure to be honest -- maybe another MVP2 owner has some insight?

 

[Nocturne31]

hmmmm interesting -- well I guess they might just dump you set voltage out in voltage mode and the watt limit doesn't come in to play there...... or their measure of watts isn't very accurate -- but kind of weird they would set a hard limit on their watts without a need to -- not sure to be honest -- maybe another MVP2 owner has some insight?

I'll get to the bottom of this! Thanks anyway you've been very helpful