Hello all, I just got my SVD today and for some reason the long tube won't fit both the 18350. The batteries are AW IMR 18350s, button tops. I can't get the tube to hold both 18350s inside comfortably. It screws really hard and I'm afraid I might mess up the threading. Anyone know why I can't fit both?
Itaste SVD 18350 stack doesn't fit?
- Thread starter arlind94
- Start date
- th_trl_thread_readers 0
- Status
Are you using the right extension tube? It comes with two...a long and a short one.
The short one is screwed on when you open the package. And the longer one isn't screwed. So yes I'm using the longer tube
I try the smaller tube, and I can make it work with the stack, but the short tube is barely holding onto the threads
I would not advise stacking the batteries. Either use a 18650 with the long tube or 1 18350 with the short tube. More info can be found here. http://www.e-cigarette-forum.com/forum/new-members-forum/493876-batteries-innokin-svd.html
^^ This. Besides my SVD is GIANT with one 18350 in it and a friggin light saber with an 18650 in it!
It isnt a mech so I am not certain why you are stacking batteries?
Taste Your Juice | BATTERY INFORMATION
8. Try not to stack, but if you MUST… 1) use protected batteries (unless your device doesn’t like protected batteries then see the following points), 2) use a fuse such as the 2 Cents For Safety if your device doesn’t have built in protection, 3) use a like pair, 4) your like pair should have been purchased at the same time… they are married. They like to be together and spend all their time together. So they want to be discharged (in the device) and charged (on the charger) together. Never stack unlike batteries, or like batteries of unknown condition.
Hopefully this helps!
Well, when it comes to battery safety, you can never say it too many times.
I couldn't even think of vaping a double stack SVD.
My SVD in 18350 mode is the same size as a fully telescoped Magneto (18650) with RSST on it! and a lightsaber in 18650 mode.
Like others said, just don't do it. 18350 or 650. If you are trying to get longer battery life (SVD is a energy hog) get the Panasonic 18650 3400mah battery.
My SVD in 18350 mode is the same size as a fully telescoped Magneto (18650) with RSST on it! and a lightsaber in 18650 mode.
Like others said, just don't do it. 18350 or 650. If you are trying to get longer battery life (SVD is a energy hog) get the Panasonic 18650 3400mah battery.
I got it to work with the short tube and the stack, you guys are right though I'll just wait for my 18650 to come in tomorrow. Another question though, I got three tanks, they're all new. But every time I put a new juice in it, it comes out tasting burnt. Is it because the coil is new?
It's probably because you are not waiting 15-20 minutes for the wick to get saturated.
This ^^
And what VV or VW setting are you using? Turn your mode of choice to the lowest setting and go up one click and vape - if it is to high everything will taste like horrid burnt yuck.
I don't know anything about stacking but I do know that you need to keep the SVD dry. I nuked mine from not paying attention and unscrewing my PT2 leaving the base on the unit and spilling juice everywhere
- Status
Similar threads
