I've been bitten by a Cobra!

[badinfluence357]

I received my new cobra Ti about a week ago after buying it from the classifieds. I've used it twice since I got it and I must say that the quality that has gone into making this atty has left me shock....I have been vaping the same flavors of ejuice for months..once I vaped it on the cobra it was like tasting a whole diffrent juice...the cobra elavated the taste of my ejuice to a pure, clean and powerful crisp taste.. I just can't get over it!..feels so strong that I can only take a few hits and have to put it down. I'm actualy feeling satisfied!...With some other attys that I've tried, I have noticed that I have to chain vape to get the level of satisfaction that I'm getting out the Cobra just with a few vapes...Its just amazing, you would have to try it to understand.... I'm vaping it at my norm, single wick, 34 awg kanthal, 1.3 to 1.5 omhs at 5.5 watts. Its rocking my nugget!!!...lol
View attachment 145212View attachment 145213View attachment 145214

WARNING! Watch out for Cobras, they bite hard....


Sent from my SCH-R910 using Tapatalk 2

 

[Kopfstimmen]

Nice! Good looking snake...

 

[gemi]

Very nice.

 

[Butters78]

Approves...

 

[Old Curmudgeon]

Who makes these?

 

[sej016]

Available only through Alba Vapours.

Cobra Atomisers


and currently Out of Stock

 

[just one day]

Phiniac will have them soon also. As well as custom glass tanks for them.

 

[JordanL]

Available only through Alba Vapours.

Cobra Atomisers


and currently Out of Stock

Holy ........

95 pounds for an atty? Are these gilded with the saliva of baby Jesus?

 

[gimmieshelter31]

Close. Titanium.

 

[badinfluence357]

You can also buy them here!
http://phiniac.com/index.php

I think they have in stock!

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Who makes these?

Siam mods makes them.

Sent from my SCH-R910 using Tapatalk 2

 

[MrKV]

Currently waiting on mine... For anyone looking for one of these Alba Vapours currently has some in stock, but they will be gone quick so hurry.

Make sure to use coupon code "ukvapers," that will cover the shipping cost.

 

[PhreakySTS9]

Can you guys that have a Cobra tell me what size of a piece of mesh you use? For example, on my DID clone I use a 40mm x 25ishmm So that it fits but wicks well enough. I know the Cobra has a bigger wick hole than the DUD, so i'm wondering what size pieces of mesh I should use when it gets to me.

 

[vapdivrr]

if you think your juice tastes amazing with the 32g wire, try some 28 or 30 g wire instead. i have DID and use to use 32g, went to 28g wire and with a 4wrap coil getting ohms around 0.08 to 1.0. no problems on provari with a good coil and imo, better taste and thicker vapor.

 

[PhreakySTS9]

Holy crap, I just noticed you live in Bradenton. I was there a few months ago moving my sister in(she's in pharmacy school at LECOM). I checked out the one ecig shop in Bradonton (CleanSmoke I think it might have been?) but all they sold were Ego/510's and Dekang juice. It seemed like there was at least one more in Sarasota but I never made it to any.

I didn't even ask the owner, but I got the impression by the way he talked that he wasn't even a vaper, which is kind of weird if true. I never saw him vape when I was in there, but maybe he does and is just new. He told me that he did "research" on finding the best juice. I can't imagine any vaper calling Dekang the best anything...

 

[LongDraw]

Can you guys that have a Cobra tell me what size of a piece of mesh you use? For example, on my DID clone I use a 40mm x 25ishmm So that it fits but wicks well enough. I know the Cobra has a bigger wick hole than the DUD, so i'm wondering what size pieces of mesh I should use when it gets to me.

The last I made was about 40mm long by about 45 to 50 wide, I roll tight until it fits snug but slides in and out fairly well. Gonna try 60 next time I need to make a wick.

I am betting more can fit, just haven't tried.

 

[badinfluence357]

I use 32 and 34awg haven't tried 30 and 28awg...isn't that a lil to thin for high voltage or high wattage vaping ? I really don't know...also I fold my 12"x12" sheet of ss mesh in half and keep folding untill I get a lil square of about 3" x 2" or 3"x3" inches, (visual measurements) never use a ruler...then I use the outline of the folds as my cutting guide. If I need a thick wick I use 2 sheets otherwise I only use one...everything its practice with vaping... eventually you will find what works for you....
Sent from my SCH-R910 using Tapatalk 2

 

[PhreakySTS9]

I use 32 and 34awg haven't tried 30 and 28awg...isn't that a lil to thin for high voltage or high wattage vaping ? I really don't know...also I fold my 12"x12" sheet of ss mesh in half and keep folding untill I get a lil square of about 3" x 2" or 3"x3" inches, (visual measurements) never use a ruler...then I use the outline of the folds as my cutting guide. If I need a thick wick I use 2 sheets otherwise I only use one...everything its practice with vaping... evetualy you will find what works for you....
Sent from my SCH-R910 using Tapatalk 2

Lower gauge wire is thicker actually. 28awg is thicker than 30. 30 is thicker than 32, etc. But some people will rock a 1.3ohm coil at like 4.2volts. That is way too much for me but to each his own. I don't have the Cobra in yet, I just know the wick holes are bigger than the hole in my DID clone, so i'm excited to try to roll some thicker wicks.

 

[badinfluence357]

Ok I see...I'm going to order some 30awg and 28awg to test it..... I think It would be better, specially for attys that are sensitive with hot spots. It also appears that there wouldn't be a need to twist wires do to the thicker wire gauge. it does make sense!

Sent from my SCH-R910 using Tapatalk 2

 

[tyrant666]

I received my new cobra Ti about a week ago after buying it from the classifieds. I've used it twice since I got it and I must say that the quality that has gone into making this atty has left me shock....I have been vaping the same flavors of ejuice for months..once I vaped it on the cobra it was like tasting a whole diffrent juice...the cobra elavated the taste of my ejuice to a pure, clean and powerful crisp taste.. I just can't get over it!..feels so strong that I can only take a few hits and have to put it down. I'm actualy feeling satisfied!...With some other attys that I've tried, I have noticed that I have to chain vape to get the level of satisfaction that I'm getting out the Cobra just with a few vapes...Its just amazing, you would have to try it to understand.... I'm vaping it at my norm, single wick, 34 awg kanthal, 1.3 to 1.5 omhs at 5.5 watts. Its rocking my nugget!!!...lol
View attachment 145212View attachment 145213View attachment 145214

WARNING! Watch out for Cobras, they bite hard....


Sent from my SCH-R910 using Tapatalk 2

The Cobra bit me last night......was only 24 left when I bought