- Status
Can't comment on that one, I have the rsst and i love it. Really easy to learn on and set up your first genny set up.
The AGA-t2 can be a pain to set up, but after the learning curve is a great genny.The RSST is a bit easier to set up for a beginner. You can't go wrong with either device.
if you dont mind me asking what makes the AGA a PITA to setup for beginners?
Mehh... I know rba's are all the rage right now, but between my Protank, Protank II and my new Kamry X10, I'm already blowing clouds.
I had to back my Vamo down to 7.5w because I was getting too much throat hit.
I had to back my Vamo down to 7.5w because I was getting too much throat hit.
im using protanks now on my VV egos and still plan to use them on my MOD purchase. Ive been rebuilding them so have a little knowledge on building coils....just wanted to get one RBA that i can tinker with and see what im missing or not missing. I also do have an RDA but i think its at the limit of my ego batt.
the only zmax i was seeing was the one made by smoktech and from the past i havent had much luck with smoktech items. Although ive never had a MOD i was weary about this company.
From the two you are looking at I would go with the SVD, both use pretty much the same chip set from what I understand as does the zmax, my reasoning is yes the vamo can take 18350 or 18650, I happen to like the 18490/18500 IMR batteries, the telescope of the SVD allows them as well.
Now that being said if I where going to be buying I would go with the Sigelei Zmax Telescope, I have friends with one and it does everything I want in a mod and has the flat top that I prefer with tanks.
Now that being said if I where going to be buying I would go with the Sigelei Zmax Telescope, I have friends with one and it does everything I want in a mod and has the flat top that I prefer with tanks.
I was going to order a v2 vamo, out of stock at the place im planning to order from.. Looked at the svd, like it better although its $20 more. will by buying the svd, and i like the look of the box mod too, but one at a time.
The look of the v3 vamo is a deal breaker. ribbed for your pleasure
The look of the v3 vamo is a deal breaker. ribbed for your pleasure
Come on, y'all. The OP has narrowed his choices to two of the best entry level electronic mods he could get, and all y'all are throwing more options at him.
Are ya tryin' to help, or what?
I still say, close your eyes and pick one. Then, get the other in a few weeks and justify the purchase based on how much money you've saved by NOT SMOKING!
Are ya tryin' to help, or what?
I still say, close your eyes and pick one. Then, get the other in a few weeks and justify the purchase based on how much money you've saved by NOT SMOKING!
I have about a dozen mods now, and still spent less than a third of what I would have spent on analogs...
Last edited:
Ive had my vamo v3 for about a month now, and I have to say I absolutely love it as a first mod. Its pretty straight forward to learn and use, for me its just a stepping stone.
Im looking at box mods now, might go with a reo but idk yet. As far as the MVP I have no experience but I havent seen many bad things about them so that should be a good sign.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Im looking at box mods now, might go with a reo but idk yet. As far as the MVP I have no experience but I havent seen many bad things about them so that should be a good sign.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
The RSST has an insulated wick hole, the aga-t2 does not. I guess the insulated wick makes it easier to work out any hotspots. With a little modification to an aga-t2 (check youtube videos) and some practice it will give you a great vape. The only problem with the RSST is that it has a polypropylene tank, which is better than most tank crackers. I only use it with juice know not to melt tanks.
Come on, y'all. The OP has narrowed his choices to two of the best entry level electronic mods he could get, and all y'all are throwing more options at him.
Are ya tryin' to help, or what?
I still say, close your eyes and pick one. Then, get the other in a few weeks and justify the purchase based on how much money you've saved by NOT SMOKING!
haha your right about that.....i catch myself looking at these other mods that people suggest but im open to anything. Right now in the shopping cart I have the SVD kit and the VAMO bare bones which is only like 50 bucks. So im pretty sure the SVD will be the one for now.
I do want the REO but thats a later purchase down the road.....maybe a xmas present to myself or something. But for now the stick mods are gonna get bought first.
Now to figure out a RBA. I like the RSST and the AGA but I like having the glass tank. Im hooked on the protanks and its glass tanks cause they dont hold their flavor after a quick rinse as bad. I have an RDA ive been playing with and it works great so besides the wicking hole in the AGA anything else different about it physically than the RSST?
The RSST has a spring loaded center post , making it easier to attach the top of the coil. The AGA-T2 has three nuts on the center post.I have added a spring and washer to my AGA-T2 to make it easier to build. Both work great.
EHHHHH......screw it just put my order in for a VAMO V3. Cheaper than SVD and does the same thing. Both telescoping and both does V, W and OHM. Ill start with this and suck it up if I dont like it.
Also went with the AGA-T and got a glass tank to replace the plastic one with.....figured i can tinker with this...shouldnt be too bad since ive been building RDAs and tanks for quite some time now......
Also went ahead and picked up 2 pro tank mini V2's since I love those for on the go type activities....im in the army bomb squad so gotta have a quick vape from time to time.....LOL
I think the next one Im gonna get is gonna be the REO and give the bottom feeder a try.
So my journey starts....thanks for all the comments and concerns....will post pics of my setup when it gets here......
Also went with the AGA-T and got a glass tank to replace the plastic one with.....figured i can tinker with this...shouldnt be too bad since ive been building RDAs and tanks for quite some time now......
Also went ahead and picked up 2 pro tank mini V2's since I love those for on the go type activities....im in the army bomb squad so gotta have a quick vape from time to time.....LOL
I think the next one Im gonna get is gonna be the REO and give the bottom feeder a try.
So my journey starts....thanks for all the comments and concerns....will post pics of my setup when it gets here......
- Status
Similar threads
