Janty ego tank system (JETS) review

[Flamethrower24]

Most common problem with tanks. If your atomizer and tank is from janty, you won't have much of this leak coz janty made the connection super thight. But if u use joye tank atomizer and cart, is quite loose. So the air pressure inside push up some liquid to cause the small leak at the atomizer-tank area

 

[Zeroi]

It is the Janty Tanks and Atomizer different. Janty did solves the Leaking Problem. but Within is unsolvable. but it is till the best so far.

Most common problem with tanks. If your atomizer and tank is from janty, you won't have much of this leak coz janty made the connection super thight. But if u use joye tank atomizer and cart, is quite loose. So the air pressure inside push up some liquid to cause the small leak at the atomizer-tank area

 

[noblas]

My tank used to leaked a lot also. but i practice to fill it with allowing some gaps around 2mm to the cap. and now i don't have much problem using the tanks. maybe lil bit of leaking but not that serious. just lil bit of liquid particles around the tanks but i guess it's from the condensation though. here's the troubleshooting guide for tanks.

Having Tank Problems? Try this troubleshooting guide.

and this is the video

Having Tank Problems? Try this troubleshooting guide.

It helps me a lot. hope this is helping newbie user as it helped me..

 

[Fattybob]

Hey guys, thanks for the prompt replies.
My set is the Janty JETS set. But still leaks.
Am gonna check out how to fix it. Many thanks. =)

 

[icemangrafx]

Hey guys, thanks for the prompt replies.
My set is the Janty JETS set. But still leaks.
Am gonna check out how to fix it. Many thanks. =)

When refilling your tank, make sure not to oerfill it. Leave a gap for some air. This will prevent leaking. I am using my first tank and been refilling it eversince. Leaking happens once awhile but not serious. Might be due to the pressure during pushing of tank into atty. Seldom happen when I leave some gap in the tank during refilling. Hope this helps.

Regards,
Jay

 

[natgw]

seems like janty jets do have leaking problem as well.. liddat might as well get joye ego tank kit from healthcabin.. much cheaper and better cause they provide 900mahs batteries..

 

[MC28]

seems like janty jets do have leaking problem as well.. liddat might as well get joye ego tank kit from healthcabin.. much cheaper and better cause they provide 900mahs batteries..

Same same one larx...

Buden cheaper as well..

 

[icemangrafx]

For joye ego-t users, I heard that their tanks is clear. At the bottom of the tank where it pierced thru the atty, is it plastic? Same as Janty's tank or is it rubber? I got a third party tank which is clear like Joye ego-t's but not sure te bottom part since I do not have any joye to compare. Here are the image. The third party the so called "joye ego-t" (left) & Janty's original JETS tank (right). See the difference? Janty's tank cover is made of plastic and has the silicon/rubber cap to cover it where as the third party's tank cover is made of rubber/silicon material so no need for extra item. Upon using them, I prefer Janty's bottom tank cover because the flow of juice is much better as compared to the other. They are compatible, so I use the third party's tank with Janty's tank cover...Sweet...

 

[icemangrafx]

Here is my current rig...

 

[valour]

My Joye eGo-T tank is the same like u claim the janty tank. same tank cover.

I never seen the 1 on the left before. where u get it? either joye came out with a new edition for the tank which i dont know about it. or its a chiong ego-t made by other manufacturer.

For joye ego-t users, I heard that their tanks is clear. At the bottom of the tank where it pierced thru the atty, is it plastic? Same as Janty's tank or is it rubber? I got a third party tank which is clear like Joye ego-t's but not sure te bottom part since I do not have any joye to compare. Here are the image. The third party the so called "joye ego-t" (left) & Janty's original JETS tank (right). See the difference? Janty's tank cover is made of plastic and has the silicon/rubber cap to cover it where as the third party's tank cover is made of rubber/silicon material so no need for extra item. Upon using them, I prefer Janty's bottom tank cover because the flow of juice is much better as compared to the other. They are compatible, so I use the third party's tank with Janty's tank cover...Sweet...

 

[Flamethrower24]

@icemangrafx, bro that bottle looks familiar. Is that junyap's coffee diy from last time?

 

[tuakong]

My Joye eGo-T tank is the same like u claim the janty tank. same tank cover.

I never seen the 1 on the left before. where u get it? either joye came out with a new edition for the tank which i dont know about it. or its a chiong ego-t made by other manufacturer.

agree. My Joye Ego-T cart is the same as the one on the right

 

[icemangrafx]

@icemangrafx, bro that bottle looks familiar. Is that junyap's coffee diy from last time?

Bro, yes...This pic was long time lah... Finish already. The aroma is very strong but flavor can't say because 0mg mah...
Now with nic is good. Vaping at 11mg, good enuff for me. 80-20 pg/vg. Nice TH & flavor + good amount of vapor!
Congrats to Junyap!

Jay