Stay tuned for the Jigsaw Coil details along with the Thundercloud atty feature/breakdown by@the__vapors Tommorrow! Check my sig for fb instagram or ecf thread thanks!
<<== Jigsaw Coil (deedupdex build) ==>>
- Thread starter deedupdex
- Start date
- th_trl_thread_readers 0
- Status
I just saw this on Facebook and went, Ok how the .... did you build that. Second what's the performance of building it that way vs. all the other builds. Sounds critical but , have to say look amazing for a "artistic" looking coil. Very amazing.
Wow. Probably the best looking coil I've ever seen. I do not have the patience to build that bad boy, this is for sure. 
I know you've mentioned someplace how you do your wicks, would you be willing to share again.
That's a very nice design by the way, your stuff is always amazing.
Maurice
That's a very nice design by the way, your stuff is always amazing.
Maurice
I am just a single and simple coil kinda girl but I can still look at something like this with amazement. I'm sure it vapes great but it looks awesome. Thank you posting. 
I look forward to seeing more of your creations.
I look forward to seeing more of your creations.
Scroll down read more for fire clip link!
First of all let me thank you guys for the good feedback and support lately. If I could just reach out and help 1 person get started or learn something about building it's all worth it. Jigsaw build Dual 22g 2wrap/2splits-2splits(offset)/2wrap using a 1/8 I.D bit This was definitely a fun but a bit difficult build in a different way than the extensions. I popped two coils the first time because the bends got fatigued. So torch once to anneal the wire and it should soften up a bit. Started with normal two wraps then took my pliers and bent a 90 degree elbow while my drill bit is still inside. Proceeded to bend or fold back. Then re bend 90 degrees towards the flow of the original wrap. Spaced it out a bit and did the same process. The more you practice bending the easier it gets! Continued to wrap it around the bit then start the same process facing the other way offsetting the earlier bend in between. Could sound a bit confusing to explain by words so I've decided to just make videos on how to do the bend technique and the coil. So to summarize this is just a dual using two wires with a continuous wrap . One lead on negative, one lead on positive. To those who wants to try it and have more questions hmu or wait for my bending techniques vid. Thank you again to @the__vapors and @the_vaporsmerced fam for the atty feature. It took just about 40 min max to coil. The first two I popped took the longest till I got it down. Thanks for checking it out vapefam and checkout the fire clip. Remember to vape safe, master the safety precautions of vaping and encourage proper vape etiquette!
Fire clipvid Fire clipvid Fire clipvid Fire clipvid here:
https://www.facebook.com/photo.php?v=684365404991388&set=vb.592646290829967&type=2&theater
or here:
http://scontent-b.cdninstagram.com/hphotos-xfa1/t50.2886-16/10591898_678139588944308_338824789_n.mp4
A lil firing clip of the Jigsaw. This won't be the last as I will keep improving this build until I get the results I want. Vapors doesn't shootout like a standard wrap because there are too many spaces in between. But it def does still work and vape well. What I would change for the next Jigsaw build would probably be a smaller I.D. I have ideas in my head and best believe they're commin!!! This is just the baby jigsaw! Goodnight vapefam thanks for all the support If you want to check out more just peep them at facebook.com/deedupdex or instagram.com/deedupdex
First of all let me thank you guys for the good feedback and support lately. If I could just reach out and help 1 person get started or learn something about building it's all worth it. Jigsaw build Dual 22g 2wrap/2splits-2splits(offset)/2wrap using a 1/8 I.D bit This was definitely a fun but a bit difficult build in a different way than the extensions. I popped two coils the first time because the bends got fatigued. So torch once to anneal the wire and it should soften up a bit. Started with normal two wraps then took my pliers and bent a 90 degree elbow while my drill bit is still inside. Proceeded to bend or fold back. Then re bend 90 degrees towards the flow of the original wrap. Spaced it out a bit and did the same process. The more you practice bending the easier it gets! Continued to wrap it around the bit then start the same process facing the other way offsetting the earlier bend in between. Could sound a bit confusing to explain by words so I've decided to just make videos on how to do the bend technique and the coil. So to summarize this is just a dual using two wires with a continuous wrap . One lead on negative, one lead on positive. To those who wants to try it and have more questions hmu or wait for my bending techniques vid. Thank you again to @the__vapors and @the_vaporsmerced fam for the atty feature. It took just about 40 min max to coil. The first two I popped took the longest till I got it down. Thanks for checking it out vapefam and checkout the fire clip. Remember to vape safe, master the safety precautions of vaping and encourage proper vape etiquette!
Fire clipvid Fire clipvid Fire clipvid Fire clipvid here:
https://www.facebook.com/photo.php?v=684365404991388&set=vb.592646290829967&type=2&theater
or here:
http://scontent-b.cdninstagram.com/hphotos-xfa1/t50.2886-16/10591898_678139588944308_338824789_n.mp4
A lil firing clip of the Jigsaw. This won't be the last as I will keep improving this build until I get the results I want. Vapors doesn't shootout like a standard wrap because there are too many spaces in between. But it def does still work and vape well. What I would change for the next Jigsaw build would probably be a smaller I.D. I have ideas in my head and best believe they're commin!!! This is just the baby jigsaw! Goodnight vapefam thanks for all the support If you want to check out more just peep them at facebook.com/deedupdex or instagram.com/deedupdex
- Status
Similar threads
