Joining the club

suprtrkr · Dec 19, 2015

Snagged a black Reo LP/SL with the subohm contacts and adjustable 510 on the classies last night. I'll be out there squonking next week. She came with a Loki Labs Odin modified for BF. Don't think I'm going to like the Odin much, frankly. I'm a dual coil kind of guy, and I like 'em airy, so the air slits look kind of small to me. But hey, I don't have any other BF attys, and Rob is sold out of RM9s ATM, and you have to start somewhere

If anybody has a fave build for the Odin, or can point me to a big air, dual coil bottom feeder, I'd be grateful for the steer.

pwheeler · Dec 19, 2015

suprtrkr said:
Snagged a black Reo LP/SL with the subohm contacts and adjustable 510 on the classies last night. I'll be out there squonking next week. She came with a Loki Labs Odin modified for BF. Don't think I'm going to like the Odin much, frankly. I'm a dual coil kind of guy, and I like 'em airy, so the air slits look kind of small to me. But hey, I don't have any other BF attys, and Rob is sold out of RM9s ATM, and you have to start somewhere If anybody has a fave build for the Odin, or can point me to a big air, dual coil bottom feeder, I'd be grateful for the steer.

Get on over to https://www.e-cigarette-forum.com/forum/threads/catfish-atty-mods-the-next-chapter.676209/page-547 and get on the list for a Stumpy! My all time favorite rda. Plenty of air and flavor! So, you decided to join the ranks of us squonkers! Awesome

. I have 2 Odins, and while it does provide enough air, for me, it's a little restrictive. Try it out, you might like it. I build to around .25 - .3 and it'll do the job. The Vector is great. I have 2 of those also. Great air. You can also try a Velocity mini. Super on the air and being smaller, great flavor. There are a lot of atties out there that give us good air and flavor.

pwheeler · Dec 19, 2015

I took you to the wrong page where the last Stumpy list is. It's page 546. There is a list going on for the new Aeronaut. Looks to be very airy as well.

suprtrkr · Dec 19, 2015

pwheeler said:
Get on over to https://www.e-cigarette-forum.com/forum/threads/catfish-atty-mods-the-next-chapter.676209/page-547 and get on the list for a Stumpy! My all time favorite rda. Plenty of air and flavor! So, you decided to join the ranks of us squonkers! Awesome . I have 2 Odins, and while it does provide enough air, for me, it's a little restrictive. Try it out, you might like it. I build to around .25 - .3 and it'll do the job. The Vector is great. I have 2 of those also. Great air. You can also try a Velocity mini. Super on the air and being smaller, great flavor. There are a lot of atties out there that give us good air and flavor.

thanks for the steer, my friend.

puffon · Dec 19, 2015

Unless Rob has not updated his site, it shows black and SS RM9s (Vector) in stock.

suprtrkr · Dec 19, 2015

puffon said:
Unless Rob has not updated his site, it shows black and SS RM9s (Vector) in stock.

yeah? Thank you. I haven't looked in a few days.

bsidb · Dec 19, 2015

I'm using the Velocity Mini bf and it is greatVelocity Mini RDA Clone by Tobeco :vapor:

AU717 · Dec 19, 2015

I am enjoying the RM8, the Derringer. OK yes I have to have a paper towel in my pocket for when it leaks but it's worth it. Probably use too much wick or have the coils mounted too high. They are a good vape.

bsidb · Dec 19, 2015

Velocity wont leak, ton of air, more air than you can use, nice to use deck, you probably have already heard about it, don't let the affordable price fool you , its a well made topper, fills and drains well, makes a squishing sound so you know you got it(squonk) :vapor:

bsidb · Dec 19, 2015

oh congratulations on the new REO, you will love whatever you put on top, its only after you have tried a few that you start to prefer different atties just because they are differnt

fishwater · Dec 19, 2015

puffon said:
Unless Rob has not updated his site, it shows black and SS RM9s (Vector) in stock.

I just ordered one this morning from his site actually.

bsidb said:
I'm using the Velocity Mini bf and it is greatVelocity Mini RDA Clone by Tobeco

I have two of these & plan on ordering another. For the price you can't beat it plus the deck is the best out there to build IMO & the flavor is excellent, can't say enough good things about this one.
Finally welcome to the club! As they will ask you in the REO section....have you picked out your second yet? I laughed..... then I traded my Snow Wolf 200 for my second REO :thumb:

suprtrkr · Dec 19, 2015

fishwater said:
I just ordered one this morning from his site actually.

I have two of these & plan on ordering another. For the price you can't beat it plus the deck is the best out there to build IMO & the flavor is excellent, can't say enough good things about this one.
Finally welcome to the club! As they will ask you in the REO section....have you picked out your second yet? I laughed..... then I traded my Snow Wolf 200 for my second REO

Actually, if I decide I like it, I was planning on building a few...

suprtrkr · Dec 19, 2015

bsidb said:
I'm using the Velocity Mini bf and it is greatVelocity Mini RDA Clone by Tobeco

Ordered one, we'll give it a try. Thanks.

pwheeler · Dec 20, 2015

I think you'll like the Velocity mini. I have a Tobeco clone and it's fantastic!

inswva · Dec 20, 2015

Welcome to squonking. Prepare for a rapid ascent to vaping nirvana... and an even more rapid acquisition of more BF gear.

suprtrkr · Dec 20, 2015

inswva said:
Welcome to squonking. Prepare for a rapid ascent to vaping nirvana... and an even more rapid acquisition of more BF gear.

Funny you should say that. I've been looking for conversion kits all day

I have a drill press. It can't be that hard to drill that center pin...

KentA · Dec 20, 2015

suprtrkr said:
Funny you should say that. I've been looking for conversion kits all day I have a drill press. It can't be that hard to drill that center pin...

or groove it.

suprtrkr · Dec 20, 2015

KentA said:
or groove it.

I didn't think of that. That could be done freehand with no more than a dremel.

KentA · Dec 20, 2015

suprtrkr said:
I didn't think of that. That could be done freehand with no more than a dremel.

I didn't think of it either, but someone around here did.

My Reo came from the classifieds with an Atomic clone altered that way & the bf system worked beautifully. Unfortunately the clone's negative posts both fell out. Figures. I'd intended to groove a Patriot & a Stumpy, but I picked up Rob's Rm2 & Rm4 (the atomic)& 4 hasn't been off since the day it arrived.

AU717 · Dec 20, 2015

It is easier to use Fat Daddy pins. Stumpy is 2.5mm. Shorten it with Dremel cutoff and narrow the head with a bench grinder. Then it is easy enough to drill a hole above the center pin for flow into the main

Joining the club

ECF Guru

Just Vaping

Just Vaping

ECF Guru

Vaping Master

ECF Guru

Ultra Member

Senior Member

Ultra Member

Ultra Member

Ultra Member

ECF Guru

ECF Guru

Just Vaping

Do you even squonk, bro?

ECF Guru

Ultra Member

ECF Guru

Ultra Member

Senior Member

Similar threads

Users who are viewing this thread