Info below is unabashedly taken from website:
joyetech Cuboid 150W Features:
- 5-Click the fire button to turn unit ON/OFF
- Variable Wattage, Temperature Control (VT-Ni, VT-Ti, VT-SS316), New TCR Mode
- Variable Wattage: from 1.0 - 150.0 W Upgrade to 200W after installing the latest firmware update!
- Temperature Control: from 200 - 600 degrees Fahrenheit (or 100 - 315 degrees Celsius)
- Minimum/Maximum Atomizer Resistance: In Variable Wattage mode - 0.1 ohm - 3.5 ohm. In Temperature Control mode - 0.05 ohm - 1.5 ohm
- Firmware Upgradeable: Upgrade to 200W! Download the firmware upgrade from joyetech's Official Website here, and install after connecting the mod to your computer with the included Micro USB cable
- Dual Removable Batteries: Uses 2 x flat top High Drain IMR18650 batteries (minimum 25A) (batteries are not included with this device)
- Stealth Mode: Vape with the OLED screen off
- Key Lock: Lock the regulatory button to prevent accidental changes
- Atomizer Resistance Lock: Lock in the atomizer resistance in Temperature Control mode to retain temperature accuracy
- Switch OLED Screen Orientation: Rotate the OLED screen display 180 degrees
- 10-second Safety Cutoff: Pressing the fire button for more than 10 seconds will cause the device to shut off
- Atomizer Short Circuit Protection: If an atomizer short occurs, the OLED will display "Atomizer Short"
- Atomizer Low Alert: If the resistance is lower than the specified minimums above, the screen will show "Atomizer Low"
- Reverse Battery Protection: If you accidentally insert the battery cells incorrectly, the device will not turn on to prevent any damage
- Low Power Alert: If battery voltage drops below 3.1V, the screen will show "Battery Low". If you continue pressing the fire button, the screen will show "Battery Low Lock" and will cease output. Please recharge the batteries
- Short Circuit Protection: If you accidentally insert the battery cells incorrectly, the device will not power on to prevent damage
- Temperature Protection: In Temperature Control mode, if the actual temperature of the coil is higher than the set temperature, the OLED screen will display "Protection"
- Temperature Alert: If the device heats up to more than 70 degrees Celcius, the output will shut off automatically and the screen will display "Device Too Hot". Set the Cuboid aside and allow to cool down completely before continuing use
1 x Joyetech Cuboid 150W mod (High Drain Batteries are not included. You can get these at a discounted price when you select the Make it a Kit option above.)
1 x Micro USB Charge Cable
1 x User Manual and Warranty Card
PLEASE NOTE: This is an advanced device and we highly recommend you take the time to examine the included User Manual in detail. For a brief overview on using the Cuboid, please click on the 2nd tab above, titled "Feature 6".
Size: Height 91.2mm (3.6") / Length 42mm (1.65") / Width 28mm (1.10")
Price: $45.00
Buyer pays for shipping via Priority Mail and/or any addition Insurance
Ships within 2 - 3 days.
PAYMENT via Pay Pal with absolutely no mention of E-Cigarettes.
THANKS . . .
.
