Just bought a mini couple ?'s

Status
Not open for further replies.

skinny30

Full Member
Verified Member
So i just bought a mini 2.1 here of the classifieds and i'm pretty pumped. Comes with RM2 as well. Just had a few questions.

1. Can you recommend batteries and where to get them?
2. coil and wick recommendations?
3. Best deal on an ohm reader?
4. This doesn't have the sub ohm upgrade how hard is it to do that?

Thanks
 
Last edited:

FACE MEAT

Ultra Member
ECF Veteran
Verified Member
Mar 1, 2013
2,276
4,815
44
Costa Mesa, CA
1. Can you recommend batteries and where to get them?
- IMR 18490 3.7 1100mAh (buy like 3 or 4) (18500 batteries work as well)
2. coil and wick recommendations?
- I use 26g Kanthal dual wrapped. It comes in around .3ohms
3. Best deal on an ohm reader?
- $20 is a fair price on any website

I was about to warn you about exceeding the AW 18490's amp limit until I looked it up. It's rated at 14.5A. Pretty surprising.
 

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
1. Can you recommend batteries and where to get them?
No need to look any further than AW IMR 18490 3.7V 1100MAH from RTD.

2. coil and wick recommendations?
My new Mini is rocking with a 28ga 1.0 ohm micro coil and CC wicking (CelluCotton). I've done sub ohm coils for a long time, but now days it's all about flavor to me so I match the build to the joose's I will be vaping the most.

3. Best deal on an ohm reader?
Usually around $20 almost anywhere.

4. This doesn't have the sub ohm upgrade how hard is it to do that?
Parts from reomods, and if Pete can do it anybody can (and probably with more finesse). ;) Build is on a Grand, same on a Mini. About 24 minutes in...
https://www.youtube.com/watch?v=QOcs3kdv97o
 

skinny30

Full Member
Verified Member
Welcome skinny30 Skip the ohm reader there for amateurs get voltage meter and you can leave your atomizer on your mod to check the ohms . This will save your mods 510 connection and go easier on the gaskets in your mod and save you time . Another bonus you can check your batteries .

What is this voltage meter you speak of? Thanks everyone for the answers
 

nerak

ECF Guru
ECF Veteran
Verified Member
Feb 12, 2011
25,335
60,415
Fairfield Township, OH, USA
www.facebook.com
What is this voltage meter you speak of? Thanks everyone for the answers

RTD has those also. They have wires instead of the screw on part for your rda.

177-hongda-600__49430.1399405671.451.300.jpg
 

Raynman

Vaping Master
ECF Veteran
Verified Member
Apr 5, 2013
3,618
13,090
Marion In USA
I would suggest going to RTD for the batteries and a Multimeter. If you want the Sub kit right away order from Rob and pick up 3 feet of each size wire and find out which you like best then order in bulk. Two stop shopping. While your on Robs site pick up a couple of springs, a couple of RM2 screws, and a couple each of the 1x10, and 1.5x10 o-rings. Congrats on your Mini and welcome to the mad house of happy vapers! If you have any other questions just ask we'll be glad to help.
 
Status
Not open for further replies.

Users who are viewing this thread