K1000 epipe from Fastech

[1buda]

I got the above epipe for my birthday. I really don't like the tank that came with it. I'd like to use my others tanks but I need a adapter. The epipe has male threads on it. I'd will be using tanks like Protank mini & Protank 2. What type of adapter do I need and who carries them?

TIA

 

[FnMag]

Sounds like a ego to 510. Most everyone carries them, I'd use whoever is local to get it asap.

 

[Rathamar]

I got the above epipe for my birthday. I really don't like the tank that came with it. I'd like to use my others tanks but I need a adapter. The epipe has male threads on it. I'd will be using tanks like Protank mini & Protank 2. What type of adapter do I need and who carries them?

To use your Protank Mini, 1buda is correct you will need a 510 TO EGO ADAPTER. They are around $5. Here is one from Vapor Beast

There should be an adapter between the tank that came with it and the Epipe. Since you stated that the epipe has male threads, my guess is when you unscrewed the tank from the pipe it stayed on the tank, you should be able to unscrew it and screw it right on to your protank 2 (See Pics Below).

The other odd thing about this pipe is that the wiring is backwards despite what the instructions say. The battery should go in positive down. This has been confirmed by myself and Rickajho (see this post here). It will not matter unless you attach some type of VV adapter to this as I do (I use the Silencer from NHaler)

 

[1buda]

Thanks for the info folks. Mine didn't come with an adapter, all that came with my pipe was cone which really doesn't fit anything. The whole atty screws in to the pipe. I've tried to remove the so called adapter from the atty with no luck, but it did lift up and away from the bottom of the atty. I going to throw it in the freezer and try again later. In the other post, can I use my Kayfun on this epipe?

 

[Laylel]

I did look at pics on FT, looks like you cannot disconnect that atty/adapter thing, looks like it's solid piece. Just get proper adapter it cost close to nothing even in local vape shop. Or FT has some as well, if you're ok to wait for shipping.
Thank you for posting it. I was thinking about getting one, so now, if i will get it, i will get adapter as well, right away.

 

[1buda]

I did look at pics on FT, looks like you cannot disconnect that atty/adapter thing, looks like it's solid piece. Just get proper adapter it cost close to nothing even in local vape shop. Or FT has some as well, if you're ok to wait for shipping.
Thank you for posting it. I was thinking about getting one, so now, if i will get it, i will get adapter as well, right away.

I open up a ticket with slowtech asking them about that adapter. Luckily I just bought a wooden pipe and that adapter does fit it. So it does exist, just got to find one. Warning to anyone buying a e-pipe from Fasttech, you can only use the atty that comes with it.

 

[Walpurgis]

I use an Aerotank with my K1000. With the Ego to 510 adapter it works just fine.

 

[1buda]

I use an Aerotank with my K1000. With the Ego to 510 adapter it works just fine.

Where do I find this ego to 510 adapter, all I find is 510 to ego.

 

[ZipperPhil]

i just got a k1000 for fathers day...the adapter was crossthreaded on but came finally came off once i used two pairs of pliers (thankfully since the tank that came with it is really quite unimpressive
)

 

[tpalmiter]

I use an Aerotank with my K1000. With the Ego to 510 adapter it works just fine.

That's odd, my aerotanks fit my K1000 just fine. I do need a 510 to ego adapter to use my mini aerotank.

 

[Huh?!]

The aerotank and aerotank mega will fit fine but the aerotank mini will need a 510 to ego adapter because of the internal threading. That may be the tank he is referring to.