Kanger dual coil unit rebuild with clapton

[m4licious]

Hello everyone!
I have seen many videos and tutorials on how to rebuild the old kanger dual coil, but it seems that they use a wire like kanthal. Because i am new to this(rebuilding coils) i wanna ask if is possible to rebuild this little coil with clapton wire. Will it be harmful to an ego battery(650mah)? Any help would be appreciated! Thanks a lot.

Edit: Sorry for posting in this section, i reliazed that there is another one for this kind of matter after i had posted...

 

[Carl2]

I've got a Kanger Top box mini, never got much flavor from it, I bought a deck for use with the tank but it wasn't that good. I next tried a Vaperesso Gemini RBA which has the dual coils and finally started getting some flavor.
When I think of Clapton I think of SS but found they also have SS and Kanthal wire coils. I'd say the important thing
is will it be used in temp or wattage mode and what is the resistance you will be using. I'm use to the 16850 which provide a lot more current.

 

[madstabber]

Yea it should work as long as you have the room to fit the coil in there. The battery should be fine, although it may take more battery juice to heat more wire that would just reduce the time between recharges. It won't damage the battery.

 

[Kickingthesticks]

Hardest part is fitting a Clapton in there. When you get into smaller cores like 32g and 34g it becomes a real pain to clapton. When you are going that small I doubt the flavor will be that much better for your longer ramp ups and decreased battery life.

 

[Kickingthesticks]

Forgot to mention ego battery won't fire below certain ohms. I vape at 1.2-1.5 ohms and the 30gX36g claptons I use won't fit in a kanger dual coil unit. So you have to make a Clapton that will fit but still ohm out high enough for an ego battery to fire lol. Good luck and let us know If you get one to work

 

[Carl2]

With nickel coils I was able to make coils and then move the tank to the Kanger or Eleaf Pico. With the SS I got a nice stable coil at .40 ohms, It worked in the Kanger and it worked in the Smok, bringing it back to the Kanger it stopped working. Smok takes a .4 and Kanger takes a .50 ohm coil, Always something with that SS coil.