Kanger firing at 0.3ohms with 1.5ohm coil

[Simon Templar Christopher]

Evening,

Got a kanger topbox mini with temp control and i'm quite anxious since it reads 0.3ohms with all the coil I try on variable wattage mode..
Tried 3 different coils and it keeps reading 0.3...
When I usually build my RBA (with my former subox mini), I get 0.6 /0.7 and I'm thus pretty much worried that it might be dangerous..
Will appreciate some insight.
Thanks and vape safely.
Cheers.

 

[subwayaznm]

I would suspect that you have a unit with a malfunction and would contact Kanger . Doesn't sound right, and as they say. "An ounce of prevention is worth a pound of cure."

 

[trippy_K82]

Evening,

Got a kanger topbox mini with temp control and i'm quite anxious since it reads 0.3ohms with all the coil I try on variable wattage mode..
Tried 3 different coils and it keeps reading 0.3...
When I usually build my RBA (with my former subox mini), I get 0.6 /0.7 and I'm thus pretty much worried that it might be dangerous..
Will appreciate some insight.
Thanks and vape safely.
Cheers.

have u tested your build on ohm meter?

 

[Robert Cromwell]

What does the mod show with no tank on it?

 

[Robert Cromwell]

RBA? .3 is about right if the chimney is hitting the top of the coil.

 

[Simon Templar Christopher]

Got it: thanks Robert Cromwell.
I switched the mod on without the RBA and it indeed read 9.99 and inserted the RBA and it asked 'new atomizer' and replied by the positive and the resistance changed to .54 -which is more likely to be the correct one..

 

[Simon Templar Christopher]

thanks Trippy...

 

[crazyhendrix]

Got it: thanks Robert Cromwell.
I switched the mod on without the RBA and it indeed read 9.99 and inserted the RBA and it asked 'new atomizer' and replied by the positive and the resistance changed to .54 -which is more likely to be the correct one..

Glad you found a kit locally.