kanger sub tank mini rba.

[thepeterde]

What gauge wire in the Kanger sub tank mini 26 or 28 thanks.

 

[UncleMike]

pretty sure it's 26

 

[edyle]

What gauge wire in the Kanger sub tank mini 26 or 28 thanks.

A given tank does not need a special gauge.

The smaller the space you have available to work with, the smaller the wire you are going to need to use.

You should be able to use either 26 or 28 gauge on the subtank rba heads; I'm sure 30 gauge should work fine too, because that's what I use on my heavytaste modtank which looks a lot like the subtank mini.

 

[thepeterde]

Thanks for the reply's will try both.

 

[FOG clouds]

26 is the norm for this tank. 5 wraps around 2mm blue screwdriver will put it at about .5 ohms.

 

[GccTxs67]

26 is the norm for this tank. 5 wraps around 2mm blue screwdriver will put it at about .5 ohms.

I'm using 5 Wraps, 26 gauge, on the 3mm screwdriver for 1.0 ohms.

 

[FOG clouds]

I'm using 5 Wraps, 26 gauge, on the 3mm screwdriver for 1.0 ohms.

That sounds like the good vape!!