Kanger T3S or IClear 16?

[custom-classic]

1. Pro tank II
2. Evod
Both use the same heads and are rebuildable. You can even build micro coils using 28g and use cotton for wick. Hard to beat, as far as tanks go anyway.

 

[sbc83]

For the evods, t3s ect ect it all depends on the liquid you use. Remove/add wick as neccesary to stop the leaking/gurgles.


All of my clearos have been sensitive to drastic temp changes. Not a whole lot we can do about it.

 

[h0bnail]

Got the T3S and EVOD today... really liking both so far. I'm sold on bottom coils.

 

[custom-classic]

If your vaping at 3.7v, try the 1.8 ohm replacement heads. I liked them better than the 2.5 and 2.3.
Mo watts!!!

 

[Daydripper]

If you like a warm vape the iclear 16 is the one for you. The T3s is okay as well but needs a tweaking to get it right. You can tighten the draw buy replacing the atty with one from an evod. Also remove the top wick from the atty will get rid of the gurgle, flooding, and harshness. The leaking is a seal issue, flipping the seal on the atty stem will sometimes fix this issue. Still a good clearo. The little t4's are great as well.

 

[GetVaked]

Love my T3S. Easy rebuild, no leaks, no dry hits.

Didn't like my iClear. Always leaked out of the top. Other than that, it was decent.

 

[Exchaner]

Love my T3S. Easy rebuild, no leaks, no dry hits.

Is there a link that shows how to rebuild the T3S? I'd love to try making the 2.2 ohm, but don't know what wire/wick I need.

 

[Wyld729]

Is there a link that shows how to rebuild the T3S? I'd love to try making the 2.2 ohm, but don't know what wire/wick I need.

Not a ts3 but same basic Atty head well almost! lol

Watch 'Kanger Protank Bottom Coil Rebuild HD Close Up' on YouTube
https://www.youtube.com/watch?v=6OHLJ92Lvx8&feature=youtube_gdata_player

 

[Evi|grin]

I have 4 T3Ss and 1 MT3S and all have functioned fine with 1.8-2.4ohm coils. Not a single leak and they have a nice amount of room to fill for a bottom coil. I don't care for the MT3S only because the fill window is kind of hard to see with some juices. Overfilling and getting juice in the tube is the only time ive had the slightest gurgle.

I HAD 2 iClear16s and while easier to fill the draw was crazy tight on both (even without installing on my MVP) and i even tried a i30 coil. The i16 wicks gave me dry hits even with 70PG/30VG juice. Using a i30 wick worked better. I had a local B&M order the iClear16s in for me and i did not like them at all. I gave both away to a friend that does not mind a very tight draw and tiny capacity.

Add in the $2.99 price of iClear coils and usually only 2 options for ohms, im sticking with the Kangers 5/$5.95.

 

[badexec]

Kanger all the way! I prefer the ProTank II and the ProTank Mini over the T3S but they are all far better than the iClear clearos


Sent from my iPad using Tapatalk - now Free

 

[gjustin79]

Definitely love my T3S's. A few of them make popping sounds which create little flavor explosions in my mouth which may sound good but can be annoying at times lol.

Other than that, no gurgle, no leaks. The contact is bad on one ( I have to wiggle it around on the battery to get the coil to fire) but should be okay once I rebuild it.

 

[livethechoice]

I just made the switch after two years from only using the SmokeTech CE5 redux and picked up a T3S and an EVOD, and I have to conclude that the EVOD wins out. I had to replace the coils on the 1.8 attys they both came with (no true rebuilds, I just repurposed a ton of CE5 coils that never worked for me in the redux clearo) because when I first got them the T3S leaked and gurgled everywhere and the EVOD had no draw at all. But after replacing the coils the EVOD goes for days without so much as a pop while the T3S is constantly either leaking, gurgling, or giving really airy draws. It's a damn shame too, the size of the T3S tank makes it perfect for vaping at home while the EVOD is now my go to when I leave my apartment.