Kangertech Subox Mini Resistance problem

[Kleanthis Kyrou]

Hey there forum.

So here what happens. As long as I don't press the fire up button the resistance that the ecig reads its 0.6 ohms. As soon an i press it tho, the resistance becomes 0.0 ohms and starts flashing. I did some research and already tried the 510 error and I dont know what else to try.

I remember facing the same problem a month ago but I cant remember what I did to solve this

 

[Baditude]

0.0 ohms and flashing display indicates a short, probably a short in the coil. Change the coil and you should be fine.

 

[Kleanthis Kyrou]

0.0 ohms and flashing display indicates a short, probably a short in the coil. Change the coil and you should be fine.

Already tried changing the coil and used a different atomiser as well

 

[Baditude]

Already tried changing the coil and used a different atomiser as well

Sounds like a defective processor then.

 

[Kleanthis Kyrou]

Sounds like a defective processor then.

dunno this happened out of the blue. i had it in my pocket and next thing i know was that it had this problem

 

[Two_Bears]

Hey there forum.

So here what happens. As long as I don't press the fire up button the resistance that the ecig reads its 0.6 ohms. As soon an i press it tho, the resistance becomes 0.0 ohms and starts flashing. I did some research and already tried the 510 error and I dont know what else to try.

I remember facing the same problem a month ago but I cant remember what I did to solve this

Ard you using the rba of coil head?

If goh are using a coil head the coil leads are not making proper contact.

If you are using the RBA one of tge screws are loose or you have a short.

 

[Kleanthis Kyrou]

Ard you using the RBA of coil head?

If goh are using a coil head the coil leads are not making proper contact.

If you are using the RBA one of tge screws are loose or you have a short.

let me check that and i ll be back in 5

 

[Kleanthis Kyrou]

let me check that and i ll be back in 5

changed the coil and checked the screw. Still the same problem. What can cause the short?

 

[Baditude]

Can you use a different juice attachment on the Subox Mini? Same results?

 

[Kleanthis Kyrou]

Can you use a different juice attachment on the Subox Mini? Same results?

Can you use a different juice attachment on the Subox Mini? Same results?

I have a spare atomizer if thats what you mean, which also give me the same problem and even the coil head that came with the subbox give me the same problem

 

[Baditude]

I have a spare atomizer if thats what you mean, which also give me the same problem

Then the problem is not the coil or the atomizer, but with your mod.

 

[PaulBHC]

Sound like your pin is pushed down in your mod. Or the insulator is split

 

[Baditude]

Sound like your pin is pushed down in your mod. Or the insulator is split

Good point, worth trying.

 

[Kleanthis Kyrou]

IMG_0680 — Postimage.org

 

[Kleanthis Kyrou]

well here it is the mod, as for the center pin I pushed it out and then back in using the tank not any tool so i dont think the pin will be a problem

 

[BrotherBob]

How long have you had this device? Might still be under warranty.
Might want to contact:
Local Vape Shop -----Might be simple.
Vendor who sold it ---see if they will repair or replace or advise
Manufacturer contact ---see if they will repair or replace or advise.
Shenzhen Kanger technology is most innovated vaporizer manufacturer Email: sales@kangeronline.com

 

[Kleanthis Kyrou]

How long have you had this device? Might still be under warranty.
Might want to contact:
Local Vape Shop -----Might be simple.
Vendor who sold it ---see if they will repair or replace or advise
Manufacturer contact ---see if they will repair or replace or advise.
Shenzhen Kanger technology is most innovated vaporizer manufacturer Email: sales@kangeronline.com

I have it since Christmas and I bought it online. Unfortunately there is no warranty for it. I will try a local vape store to see what they think about it.

 

[Kleanthis Kyrou]

Found the problem. Those two black things were burned up as well as a small part of the board. Any idea about what could have caused that??

 

[Baditude]

Fried components on the circuit board. Could have been from a short circuit or just faulty electronics. Hard to say.