Kangertech UniTank Leak!!!

[AaronGVapour]

Anyone know how to fix this issue? its really getting on my nerves lol

 

[epicdoom]

never had mine leak yet but I suspect its leaking at that little seals on the end of the coil there is one at the end of the threads in the coil and one on the 510 pin part of the coil, make sure there at 2 small seals they will be white silicon orings
you didn't say exactly where its leaking so this it the most logical place I can think of till I have more info.

 

[AaronGVapour]

Sorry. It makes a slurping/gurgling noise when i suck on it. I just cleaned it and checked all the seals. Everything looks fine! so annoying!

 

[epicdoom]

ok so your getting flooding issues try this first hold your fire button while blowing into the unit hard if that doesn't clear it try plowing into the vent this will be where you saw vapor coming from when plowing into the unit if it wont clear disassemble it clean and dry everything. On the removable coil you will see a silicon seal slid over the chimney pipe with the cupped section facing down towards the coil, remove it and turn it over cup side facing up this makes a better seal when the chimney extension sits down over it, reassemble the spring on top of it and the chimney extension section and reassemble the unit. fill it up and vape it if it has gurgle blow into the vent while holding down the fire button that should take care of it.

 

[AaronGVapour]

ok so your getting flooding issues try this first hold your fire button while blowing into the unit hard if that doesn't clear it try plowing into the vent this will be where you saw vapor coming from when plowing into the unit if it wont clear disassemble it clean and dry everything. On the removable coil you will see a silicon seal slid over the chimney pipe with the cupped section facing down towards the coil, remove it and turn it over cup side facing up this makes a better seal when the chimney extension sits down over it, reassemble the spring on top of it and the chimney extension section and reassemble the unit. fill it up and vape it if it has gurgle blow into the vent while holding down the fire button that should take care of it.

I tried blowing into it and i just got fluid all over.... I will try and flip it a little later! Thank you

 

[epicdoom]

sounds like your flooding bad did you try blowing into it from the vent? that usually clears mine out I only get a little gurgling after I replace the coil or refill flipping that seal has helped with both but to clear it after you flip the seal you have to blow into the vent while holding the power button you will see vapor pouring out of the mouthpiece do it for maybe 4 seconds and it should clear it completely.

 

[JQside]

Try thicker liquids. But then burnt taste might follow. There's no easy solution for these tanks. You need to keep trying other similar tanks with bottom coils. Some are way cheaper and provide more satisfying result.