Kawfee beanz, DIY and assorted Shenaniganery :)

[tejas]

Going through some old stuff... Does anyone have a use for this, or know someone that might?
6 boxes, Smoktech SMOK 510 DCT-2 tank Cartomizers. 1.5 ohm.
4 boxes, V4L 310 DCT-2 tank Cartomizers. 1.5 ohm.
Quite a few colored tanks for these.
V4L batteries (various sizes).... they've been in a box for over a year, not sure if they're still good/safe.
V4L 310 chargers.

 

[Kodak]

Hi everyone!

Got my Tobacco absolute in today, for play.

It was time to reorder nature's flavors vanilla diacetyl-free. Since I'm running higher power I run through about 15 ml of liquid a day, net just under a pint of vanilla flavoring in a year

The incremental cost to buy a full quart instead of a pint was trivial - 1 guess which I bought

If anyone else is a fan of nf, likes vanilla, happy to send some in a couple weeks when it arrives. It's a pg-free organic flavoring, I've been using it for over 5 years.

I would be willing...I haven't tried any of the nature's flavors line yet, but it's on my "to get" list once I get some of the other 500 flavors tried

 

[Kodak]

Hai Sister! Welcome Back.... MISSED YOU!!!!!

Missed you guys too!

How did I end up being the one with the reputation for misbehaving?

Ummm.....do I really have to explain?

 

[whodat2112]

 

[whodat2112]

 

[whodat2112]

 

[tejas]

 

[wvducklady]

Hahahaha! Yeah, I'd have either had to figure something else out, or I'd just end up ditchin' the atty... there's no way I'd deal with something that would be that difficult. Fortunately, that piece comes off!

Dawwwww.... that's just too cute!
Yep, it'll happen... I'm trying to do better about keeping in touch with family. I'd gotten really bad about that... it's been nice reconnecting, though.



So you did end up getting the Target Mini?

After you said "No internal battery mod"? [emoji38] Glad you're likin' it, Darlin'... it is a cute l'il mod!



Hahahahahah! Sorry, Darlin'... just trying to play catch-up. I came back in this morning and have pages and pages of catchin' up to do. [emoji14] Keep postin', though... I love to see what's goin' on wif you!

Lol! Could you imagine trying to hold the coil with tweezers and put the screw driver in to tighten the screws?!? Thats what you would call a stressful situation! Eyes all blood shot with sweat running down your forehead! Haha!

 

[markfm]

Got the microstick in. It turns out this is a version that will accept a full 22mm tank, the two 16mm I ordered aren't needed.

It needs a nipple top 18500, mine are flat top. Just ordered some adapters

Here's the cloupor mini+ with avocado 24 (a fairly short tank) next to the microstick with a tfv4 mini:

It's a very compact package, though with an 18500 the battery capacity isn't huge. Net, I like it, need the battery adapters to see if DW wants it or if it's too heavy (she likes light weight).

 

[tejas]

Lol! Could you imagine trying to hold the coil with tweezers and put the screw driver in to tighten the screws?!? Thats what you would call a stressful situation! Eyes all blood shot with sweat running down your forehead! Haha!

I can imagine using naughty language, aimed at the designer. I can imagine tossing it in the dustbin. I can't imagine trying to tweeze it. I wouldn't mind watching someone fight that thing.

 

[DingerCPA]

Good Morning Y'all!

@Kaezziel, hope all went well with Lady Wife's appointment....

Kinda meh today, but I'll poke back in to see how y'all are

 

[Kaezziel]

Lol! Could you imagine trying to hold the coil with tweezers and put the screw driver in to tighten the screws?!? Thats what you would call a stressful situation! Eyes all blood shot with sweat running down your forehead! Haha!

Nope, not me... not gonna happen. I'd just have to write that one off as a failure and a bad purchase and move on. I have a fairly low tolerance for dealing with stuff like that.

Good Morning Y'all!

@Kaezziel, hope all went well with Lady Wife's appointment....

Kinda meh today, but I'll poke back in to see how y'all are

Not too bad, Sweetie... basically just bloodwork to check liver function. All is still good there, so she's going to continue with the treatment. I'm just happy that I made it out of there wifout punching somebody... had to argue with them over her pain med prescriptions. Finally ended up getting what she needed, but it took pretty much all of my patience to do it. The last three times we've gotten her pain med prescriptions, it's meant that I had to drive all the way across Houston to get it filled. I told them yesterday that I'm sick and G.D. Tired of them making things way more difficult than they need to be. Do it my way and things will go smoothly... do it another way, and pay me back for my gas and time.

 

[Kaezziel]

D'oh! AND welcome back, Kodak!! We missed ya, hun!

 

[Kodak]

Morning Krewe! Court today, so it's going to be crazy busy around here....but I'll check in when I can!

 

[LynnNC]

Mernin' all! Sore here this morning. All the work we did last was the heavy stuff so combined with being off for 12 days and using muscles that hadn't been used for awhile makes for a complaining upper body! But it's all good!! Means those muscles will get stronger!

AND.. I built a SS coil for the STM using the V2 RBA. 30 gauge, 5 wraps 3mm. Ohms came in at 1.05. Then after it was wicked the ohms were 1.31. Loaded up the tank, ohms are 1.15. Now after vaping on it for awhile the ohms are 1.17.

 

[Kaezziel]

Mernin' all! Sore here this morning. All the work we did last was the heavy stuff so combined with being off for 12 days and using muscles that hadn't been used for awhile makes for a complaining upper body! But it's all good!! Means those muscles will get stronger!

AND.. I built a SS coil for the STM using the V2 RBA. 30 gauge, 5 wraps 3mm. Ohms came in at 1.05. Then after it was wicked the ohms were 1.31. Loaded up the tank, ohms are 1.15. Now after vaping on it for awhile the ohms are 1.17.

I know the feelin', Darlin'. All the yardwork I've been doing lately has me finding muscles that I'd forgotten existed.

Hahaha... yeah, I've heard that about SS. It can get a bit wonky with the resistances... still, though, I've got some in my cart. I'll hit the button on it before too much longer, and then I'll get to see how it works for myself. How's the vape?

 

[LynnNC]

I know the feelin', Darlin'. All the yardwork I've been doing lately has me finding muscles that I'd forgotten existed.

Hahaha... yeah, I've heard that about SS. It can get a bit wonky with the resistances... still, though, I've got some in my cart. I'll hit the button on it before too much longer, and then I'll get to see how it works for myself. How's the vape?

The vape itself is pretty good! The flavor is pretty good and even though I'm not a cloud chaser, the clouds are pretty good too. The V2 RBA did not like that 30 gauge wire though. Normally, I just capture the wire between post and the side of the base but with this thin wire I had to wrap it all the way around the post, hold it with my fingernail as I screwed it down.

 

[DingerCPA]

Mernin' all! Sore here this morning. All the work we did last was the heavy stuff so combined with being off for 12 days and using muscles that hadn't been used for awhile makes for a complaining upper body! But it's all good!! Means those muscles will get stronger!

AND.. I built a SS coil for the STM using the V2 RBA. 30 gauge, 5 wraps 3mm. Ohms came in at 1.05. Then after it was wicked the ohms were 1.31. Loaded up the tank, ohms are 1.15. Now after vaping on it for awhile the ohms are 1.17.

WOOT - YAY!!!! Kaz is right - I noticed my latest SS coil jumping all over the place. I think as long as you're keeping it "cool", I wouldn't expect the resistance to jump.

I know the feelin', Darlin'. All the yardwork I've been doing lately has me finding muscles that I'd forgotten existed.

Hahaha... yeah, I've heard that about SS. It can get a bit wonky with the resistances... still, though, I've got some in my cart. I'll hit the button on it before too much longer, and then I'll get to see how it works for myself. How's the vape?

I like SS - I sometimes can run it in Power mode without too much impact, but I have a KF V3 running it, and I HAVE to run it on SS TC mode, or else it burns the bejebus out of the hit.

I suppose if I could ever fully migrate to Rayon as wicking - I think that and SS is a pretty killer combo. I'm sitting on Nichrome in my cart, and haven't pulled the trigger yet

 

[LynnNC]

I wick with rayon so no problems there. And the ohms have been fairly steady since the beginning. It's going up a little as the coil is collecting gunk I guess. The liquid I'm running now tastes just like a banana Popsicle. This and a banana nut muffin liquid I have are the only bananas I'll vape. Not big on banana vapes.

 

[Kaezziel]

The vape itself is pretty good! The flavor is pretty good and even though I'm not a cloud chaser, the clouds are pretty good too. The V2 RBA did not like that 30 gauge wire though. Normally, I just capture the wire between post and the side of the base but with this thin wire I had to wrap it all the way around the post, hold it with my fingernail as I screwed it down.

30g is way smaller than anything I use. I typically stay around 26g... gives me a little more to work with, is easier for me to wick, and still has a pretty quick ramp up. Good to know that the flavor and clouds are pretty solid, though!

I like SS - I sometimes can run it in Power mode without too much impact, but I have a KF V3 running it, and I HAVE to run it on SS TC mode, or else it burns the bejebus out of the hit.

I suppose if I could ever fully migrate to Rayon as wicking - I think that and SS is a pretty killer combo. I'm sitting on Nichrome in my cart, and haven't pulled the trigger yet

Hahaha! Whenever I get it, I'll probably try it in the Boreas on the iPV 6X (if they ever get 'em in stock), then I'll throw a SS build in one of my mech/dripper rigs to see how it works there.

Rayon is the only wick I use any more. I 'donated' all of my cotton balls to my wife's makeup drawer.