Kayfun lite plus V2 or Lemo Drop?

[deeskinna]

so i have have made a few threads about rta ive been looking you buy and alot of people suggest the kayfun and the lemo drop and being a beginner builder i was wondering what anyone would recommend out of the 2 before i make my order and what are good coil builds for the both rta so i know what gauge wire i should buy when i place my order.

 

[Kevin littell]

I vote kayfun...


I'm not a lung hitter though.


I have no experience with the Lemo but its the same basic design....


The Erlkinogen also has a big following for a good reason. Its alittle more finnicky on the builds but well worth the effort.


Go slow, research the builds on Youtube and make your choice.


I'd start with 28 ga Kanthal on any of them....

Battery drain | Steam Engine | free vaping calculators will be your friend. Build for your battery AND the vape you want. The teeth you keep will be yours!

 

[Winchester]

Hi,

I vote Kayfun too! I agree with Kevin littell, 28ga Kenthal and check out the stuff he gave you. Very Very Important!

 

[Houndb]

I have both actually 6 plus kayfuns and one Lemo the full sized one. I have been building on the Lemo and it just isn't a kayfun. I'm not a lung hitter and the kayfuns are just right. I would go with a Kayfun and use rayon instead of Cotton to give you a little room to mess up. Plus the kayfuns you can get tons of parts for. It's like the Kirby vacuum of the vaping community.

 

[GT86]

I vote Drop! I have both and the KFL is just to tight for me and I have problems getting it wicked right. I have a lot more luck wicking the Drop. I'm pretty new to RTA's so take it with a grain of salt. I need to play with my KFL more and see if I can get it how I like it but I use the Drop so much I can't find the time to do it.

 

[Danbrooks2k]

I think the drop has better juice channels, better airflow and better flavor.

The Kayfun has worked for me at lower wattages ( I have mine on an MVP ) its easy to build and easy to find parts.

I have both and would probably get both...

I prefer the LEMO, but dang the kayfun is a great little RTA.

Just get both... its ok if you get a kayfun clone even... lots of good ones on fasttech...

 

[Jockamo]

This one is front of me...Kayfun Lite Plus Russian 91 V3 1 Clone SS Black w New Topcap Channel Designs | eBay

For the price it cant be beat. 28 Guage kanthal wrapped around something I have is 1.5 ohm. Perfect for the istick IMHO.

 

[Jockamo]

Mouth to lung is the way I go. The one I linked to is right on for that. I want to try a Lemo at some point but I hear its more airy.
I'm a bit annoyed at removing a screw to fill on the Kayfuns. The Lemo looks even more cumbersome having to remove to 510 then a screw down in a well.

 

[dice57]

Thing I don't like about the Lemo, no full metal jacket SS tank section. Did receive shipping notice on the Kayfun V4, finally a Kayfun with design improvements over the original 3.1 version. Have always top filled my Russian/Kayfun

For a first rba, would recommend looking at the flash-e-vapor V2 or V3. A great rba, and a dripper too. Haven't found much that can out purrform the flashi or easier to build on.

Agreed, Kanthal 28 gauge is a good place to start out when first building. Great for a wide range of ohms.


Vape long and Prosper.!!!

 

[GT86]

Mouth to lung is the way I go. The one I linked to is right on for that. I want to try a Lemo at some point but I hear its more airy.
I'm a bit annoyed at removing a screw to fill on the Kayfuns. The Lemo looks even more cumbersome having to remove to 510 then a screw down in a well.

I just unscrew the tank and leave the base on the mod. I also like that the fill screw is down in a well, I just unscrew it and let it lay in the well and I don't worry about dropping it.

 

[batye]

thank you, I'm learning thanks

 

[Wolfenstark]

I have both -
Have them both at full air and the Lemo is a lot more airy.

After using the Lemo on full air then going to the KFL+ v2 on full air the KFL+ v2 is very tight.

I prefer the Lemo.

I also find it easier to build on.

 

[deeskinna]

Hey everyone thanks for all the replies it really helped me out , I decided to get the KFL+ V2 to start with and next order I get I'm gonna try out the lemo. Thanks again

 

[Danielo]

Yeah!! Kayfun V2 is the best!!! Recommended

 

[djsvapour]

Hey everyone thanks for all the replies it really helped me out , I decided to get the KFL+ V2 to start with and next order I get I'm gonna try out the lemo. Thanks again

... I like the little Kayfun.

Then again, I bought my Kayfuns when there was almost no decent clearomisers, they all leaked and gave me grief in one way or another.

I more or less use mini Nautilus all the time nowadays.

EDIT - I don't have a Lemo Drop... so edited the rest of my post.

 

[Wolfenstark]

Kay fun will sit you if you like tight draws - Though depends what your used to

 

[RandyF]

Lemo is a better choice, it is way more versatile and has a glass tank. You will get more KFL+v2 suggestions because it has been around longer and more people have them, but the Lemo is better. I have 3 KFL+ v1 and v2's and they have sat devoid of juice since I got my Lemo's.

 

[Wolfenstark]

Lemo is a better choice, it is way more versatile and has a glass tank. You will get more KFL+v2 suggestions because it has been around longer and more people have them, but the Lemo is better. I have 3 KFL+ v1 and v2's and they have sat devoid of juice since I got my Lemo's.

We can only give them our advice

 

[RandyF]

We can only give them our advice

Yeah, but anything with a polycarbonate tank, now-a-days, should be an automatic scratch.

 

[diamondForever]

I vote lemo for the reason of if you like tha tight draw of a kf then you can tighten you air flow or if you want it wide open to get the lung hit you can. as some said much more versatile and in my experince easier to build on