Kayfun mini clone? Does it exist?

[petemoss]

I tried to flip the clear and metal sections as you described and it didn't fit. The metal section cannot fit on the base over the chimney. I must have gotten a different version of the Ivogo kayfun mini. The air bubbles get stuck at the junction but eventually rise.

 

[ccwaters]

You have to remove the top cap where the drip tip is, that is the part that screws onto the base, then the cap screws into the clear section. My favorite, and best solution is to use the GS tank on it, sure wish a reasonably priced source for these existed. hcigar did sell them separately but I cannot find any in stock in the US.

 

[bsoplinger]

I tried to flip the clear and metal sections as you described and it didn't fit. The metal section cannot fit on the base over the chimney. I must have gotten a different version of the Ivogo kayfun mini. The air bubbles get stuck at the junction but eventually rise.

Be careful, I was talking about the 17mm Kayfun that Ivogo makes. The clone of the Kayfun mini 2.1 is 14mm. The 17mm version is sold by itself or packaged with a Nemi, the Nemesis mini, and called the baby. The 17mm also only has the Ivogo logo on the pieces, not the Atomaxi death angel on the Nemi nor the standard Kayfun logo on the chamber.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[ccwaters]

I was talking about the 17mm Kayfun that Ivogo makes.

Same here, the regular Mini clone does not give me any issues, even with 100% VG juice, I have 3 of them.

 

[ccwaters]

$13 Copper Nemi from Focal, probably the best quality Nemi I have so far.

Ivogo Baby kit with FT Sticker: After sorting the tank issue this is my favorite.

 

[petemoss]

Be careful, I was talking about the 17mm Kayfun that Ivogo makes. The clone of the Kayfun mini 2.1 is 14mm. The 17mm version is sold by itself or packaged with a Nemi, the Nemesis mini, and called the baby. The 17mm also only has the Ivogo logo on the pieces, not the Atomaxi death angel on the Nemi nor the standard Kayfun logo on the chamber.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

No wonder it didn't fit! I have the 14mm Kayfun mini clone. Thanks for clearing that up!

 

[76bridget]

@ccwaters, link please? also, where do you get that base?

Edit: Found the base. This is it right?http://www.fasttech.com/product/1650600

 

[ccwaters]

Atomizer, is Ivogo Baby From Angelcigs, however they recently started charging an arm & leg for shipping, plus the support is very poor now. Fasttech also has it for a bit cheaper once you add the shipping. The "Sticker/base adapter" is from Fasttech. Copper Nemi I purchased from Focalecig.


EDIT: Yes thats it.

 

[ccwaters]

I feel like I'm spamming this thread!

Appears Infinite has entered the Kayfun Mini ball field! Available at a few US online stores, haven't hunted yet, but $29.00 is the cheapest i've seen so far. May have to try one!

 

[bsoplinger]

Appears Infinite has entered the Kayfun Mini ball field! Available at a few US online stores, haven't hunted yet, but $29.00 is the cheapest i've seen so far. May have to try one!

I assume a clone of the Kayfun mini 2.1 in 14mm?

Does it have the oversized clear tank section like the original and Ivogo versions? Or same diameter like the Tobeco version?

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[ccwaters]

I assume a clone of the Kayfun mini 2.1 in 14mm?

Does it have the oversized clear tank section like the original and Ivogo versions? Or same diameter like the Tobeco version?

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

Yes correct on the version, pictures I've seen are a bit difficult to tell on the tank, I would hope it does, still hunting for more info on it.

 

[bsoplinger]

In a way that's too bad. I really like the 17mm sized Kayfun baby from Ivogo. Looks great on the 14500 / 14650 mods like the Nemi, the mini Nemesis, and the like. And seems to produce more vapor. At least for me compared to both the Tobeco and Ivogo versions of the Kayfun mini. Taste is comparable and it conveniently holds quite a bit more e-liquid without needing to use 3 tank sections.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2