Kraken wont fire on my King Mod

[Julie W]

Hi folks!

As the title suggests I can't get it to fire on the King mod,the center pin is around 1mm short of connecting.
I should explain this is my 1st mech mod,& really haven't got that much idea
so if you could explain it like I'm 5yrs old it would be great

It will fire on my other mods (V.Vs) & the King fires other attys
I dont want to start messing without some concrete advice.
Any tips or pointers would be much appreciated.
Thanks !

 

[Sirius]

Have you backed the top nut off and adjusted the pos pin?

 

[Julie W]

If you mean the battery contact pin inside the top cap,then yes,I unscrewed that a little (Oh I feel dumb)
there seems to be good battery contact, but where the pin sticks out of the bottom of the kraken,it appears to be too flush & doesn't make contact with the firing pin if you can understand what I mean.
I dont understand why it should fire on everything else though.
Thanks for your help.

 

[Sirius]

If you mean the battery contact pin inside the top cap,then yes,I unscrewed that a little (Oh I feel dumb)
there seems to be good battery contact, but where the pin sticks out of the bottom of the kraken,it appears to be too flush & doesn't make contact with the firing pin if you can understand what I mean.
I dont understand why it should fire on everything else though.
Thanks for your help.

Yes if it is an HCigar or a non-reverse threaded lock ring one. So you got it sorted? The pos+ pin runs out quite a ways on the clone I have that is HCigar. The other one is a FT one that isn't adjustable. (Has durlin inserts though)