Trying to improve my dripping and my current bridgeless atty sold locally can go up to 6 drops without leaking. It's about $10 a piece though. Whats a good high volume 510 dripping atty for someone using 3.7 volts? Might consider just supporting the local guy on this but would be nice to know whats out there.
largest high volume 510 dripping atty?
- Thread starter quisp65
- Start date
- th_trl_thread_readers 0
- Status
From my experience 6 drops is alot of juice for an atomizer to hold onto before leaking.
For Me:
3 drops - Safe, no leakage
4 drops - Be careful, could leak
I don't have any experience with bridgeless atomizers.
For Me:
3 drops - Safe, no leakage
4 drops - Be careful, could leak
I don't have any experience with bridgeless atomizers.
Last edited:
The Ikenvape V2 Cannon is a great dripping atty. No driping atty is really "high volume", but some work, last and taste better than others.
My two favorite reasonably priced attys are the Ikenvape i06 and the V2 Cannon. They're a bargain at about $9. The Ikenvape site is down, but EcigCharlotte.com carries them and shipping is just $1.99 per order.
For the ultimate dripping attys, you can try the $20something HH357 or the $49 AVA.
My two favorite reasonably priced attys are the Ikenvape i06 and the V2 Cannon. They're a bargain at about $9. The Ikenvape site is down, but EcigCharlotte.com carries them and shipping is just $1.99 per order.
For the ultimate dripping attys, you can try the $20something HH357 or the $49 AVA.
Hey Sailorman,
I've got a couple V2 cannons on the way.
I am gonna use em with my Silver Bullet, when it gets here.
I am curious if I am gonna need a 510 -> 510 adapter or 510 -> ego + cone.
I am starting to think I shoulda got the i06 and an Empire mods drip shield.
(my KGO 510 attys make a pretty big mess)
Sorry Quisp65.... I don't mean to hijack your thread.......
You wont' need an adapter for your SB or an ego. The Cannon is based on a 901 atomizer, but it has a standard 510 thread. It fits my ego fine. It's wider at the mouth than a standard 510, so you'll need the 901 drip tip.
The Cannon will leak, but not as quickly as a 510 atty. It's got a huge bridge inside, so it takes some practice to prime and fill it just right so that it doesn't leak. But it won't really need a drip shield or an ego cone.
The i06 leaks more, IME. I don't use a drip shield, but it's not a bad idea for the i06. I'm not sure if they have one to fit the Cannon though. It's a pretty big hunk of steel. It looks really nice too. Very classy looking.
Last edited:
Thanks Sailorman!
IMO it'll look better without the adapters anyway.
FYI- No one makes a drip shield for the V2 cannons yet.
Thanks all. Vapure.com which is near walking distance from me isn't a member of ECF. They sell a bridgeless 510 that looks like this..
Though my dripping experience is limited I've put 6 drops in it a few times without issue using 80/20 pg/vg. I'll probably give the V2 Cannon a eventual try but EcigCharlotte.com didn't work for me and a search turned up nothing. Ikenvapes have been down a long time.
Though my dripping experience is limited I've put 6 drops in it a few times without issue using 80/20 pg/vg. I'll probably give the V2 Cannon a eventual try but EcigCharlotte.com didn't work for me and a search turned up nothing. Ikenvapes have been down a long time.
That pic remindds me of the 3-hole dripping atty from Value Vapor (Betterlife 3-hole dripping attys 2.0-2.6ohm). I have not tried those, but have heard good things about it. The price is 4.99 before shipping, and their shipping is quite reasonable. So, check it out or don't, but good luck finding what you are looking for.
BetterLife 510 3-Hole Dripping Atomizers (2.0-2.5 ohm) [BL510-3Hole] - $4.99 : ValueVapor.com, Discount Electronic Cigarettes and e-Liquid For the life of me I can't find the pic that shows the insides. It do remember it as looking like the atty in your pic though...
BetterLife 510 3-Hole Dripping Atomizers (2.0-2.5 ohm) [BL510-3Hole] - $4.99 : ValueVapor.com, Discount Electronic Cigarettes and e-Liquid For the life of me I can't find the pic that shows the insides. It do remember it as looking like the atty in your pic though...
yep Sailorman made a booboo....
EcigCharleston.com is the right site!
Here's a link to the iKenvape attys. (I bought the 1.8 ohm V2 cannons)
iKENVAPE i06 Series,3.5ohm,2.5ohm,1.8ohm,1.5ohm
I received my V2 cannon attys today.
Actually they sent 1.5 ohm instead of the 1.8 I ordered, but I'm running with it anyway.
I have been dripping with one of them for the past half hour and am impressed!
So far I haven't spilled a drop! Much better than my KGO 510 attys which made a huge mess.
BTW- They came with a flat drip tip, as shown in the pic on their website.
Actually they sent 1.5 ohm instead of the 1.8 I ordered, but I'm running with it anyway.
I have been dripping with one of them for the past half hour and am impressed!
So far I haven't spilled a drop! Much better than my KGO 510 attys which made a huge mess.
BTW- They came with a flat drip tip, as shown in the pic on their website.
I screwed up. It's ecigCharleston.com not Charlotte. I keep getting them confused.
Anyway, the only ikenvapes left in stock are the high resistance 3.5 Cannons. They're great with a VV or 5V mod but not so much with a 3.7V PV.
Looks like they still have the 1.5 ohm V2 cannons (like they sent me) in stock.....I screwed up. It's ecigCharleston.com not Charlotte. I keep getting them confused.
Anyway, the only ikenvapes left in stock are the high resistance 3.5 Cannons. They're great with a VV or 5V mod but not so much with a 3.7V PV.
Heck, I need to slow down vaping on this thing.
It's hitting pretty awesome!
- Status
Similar threads
- Locked
