Hi, guys! Welcome to New Product Introduction ! I have a question: do you need a RTA at present? Today let me introduce you one RTA named Original Ambition Mods Purity MTL RTA. Now let’s take a closer look at the RTA below.
The Ambition Mods presents the Purity Rebuildable Tank Atomizer, a compact single coil mouth to lung (MTL) RTA. The Purity RTA is constructed from 316 Stainless Steel (Body) and Glass (Tank), it features a dual post single terminal build deck and dual adjustable airflow slots located at the bottom of the RTA which siphons air up through the bottom of the build deck. With a stainless steel finish, users can match their mods perfectly. For user customization, an added juice flow control ring is provided which helps create the perfect vaping experience. Diving more in depth with the Purity, this rebuildable tank atomizer measures at 18mm in base diameter, accommodating most, if not a vast percentage of vape mods on the market. E-liquid can be poured into the Purity RTA through a removable top ring. Once that ring is unscrewed users may remove the top fill juice flow plug and drip tip housing to fill accordingly. This tank atomizer can accommodate a maximum of 2ml with the pre-installed straight glass tank section. Airflow enters the RTA through dual adjustable airflow slots located on the base of the RTA. This portion of this airflow control ring features a fully open port, which can be tapered down to a 0.5mm airflow hole. Internally, the Purity RTA features the a two post single terminal build deck that features an adjustable juice flow control system. Each terminal measures at 4mm in diameter and can accommodate a single coil build configuration. As an added feature for ease of use, lead collars are available for users to wrap their coils around each post in order to prevent the coil from shorting. Each corner end of the build deck features a cutout for cotton to tightly fit in. In the center of the build deck is a single airflow slot (measuring at 1.8mm in diameter) which directly brings airflow to the coil, delivering accurate flavor on each puff.
Main Features:
Diameter: 18mm
Tank Capacity: 2ml
Material: 316 Stainless Steel + Glass
High Capacity Tank Reservoir
Easy Unscrew Top Fill Design
Two Large Fill Ports
Two Post Build Deck
Single Coil Design
Single Terminal
Top Mounted Philips Screws
4mm Diameter Each Terminal
Side Wicking Cutouts
PEEK Insulation
Single Bottom Airflow
Directly Hits Coil
Dual Adjustable Bottom Air Slot
Four Tapered Airholes
Fully Closeable
5mm Wide Bore Delrin Drip Tip
510 Connection
Do you like it? If you want to know more, just enter the product page:
Original Ambition Mods Purity MTL RTA >>>
Mechanical Mods you would like:
3FVAPE - Mechanical Mod >>>
Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>
The Ambition Mods presents the Purity Rebuildable Tank Atomizer, a compact single coil mouth to lung (MTL) RTA. The Purity RTA is constructed from 316 Stainless Steel (Body) and Glass (Tank), it features a dual post single terminal build deck and dual adjustable airflow slots located at the bottom of the RTA which siphons air up through the bottom of the build deck. With a stainless steel finish, users can match their mods perfectly. For user customization, an added juice flow control ring is provided which helps create the perfect vaping experience. Diving more in depth with the Purity, this rebuildable tank atomizer measures at 18mm in base diameter, accommodating most, if not a vast percentage of vape mods on the market. E-liquid can be poured into the Purity RTA through a removable top ring. Once that ring is unscrewed users may remove the top fill juice flow plug and drip tip housing to fill accordingly. This tank atomizer can accommodate a maximum of 2ml with the pre-installed straight glass tank section. Airflow enters the RTA through dual adjustable airflow slots located on the base of the RTA. This portion of this airflow control ring features a fully open port, which can be tapered down to a 0.5mm airflow hole. Internally, the Purity RTA features the a two post single terminal build deck that features an adjustable juice flow control system. Each terminal measures at 4mm in diameter and can accommodate a single coil build configuration. As an added feature for ease of use, lead collars are available for users to wrap their coils around each post in order to prevent the coil from shorting. Each corner end of the build deck features a cutout for cotton to tightly fit in. In the center of the build deck is a single airflow slot (measuring at 1.8mm in diameter) which directly brings airflow to the coil, delivering accurate flavor on each puff.
Main Features:
Diameter: 18mm
Tank Capacity: 2ml
Material: 316 Stainless Steel + Glass
High Capacity Tank Reservoir
Easy Unscrew Top Fill Design
Two Large Fill Ports
Two Post Build Deck
Single Coil Design
Single Terminal
Top Mounted Philips Screws
4mm Diameter Each Terminal
Side Wicking Cutouts
PEEK Insulation
Single Bottom Airflow
Directly Hits Coil
Dual Adjustable Bottom Air Slot
Four Tapered Airholes
Fully Closeable
5mm Wide Bore Delrin Drip Tip
510 Connection
Do you like it? If you want to know more, just enter the product page:
Original Ambition Mods Purity MTL RTA >>>
Mechanical Mods you would like:
3FVAPE - Mechanical Mod >>>
Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>
