My Google fu has failed me.
Anyone know where I can find such a list?
Thanks!
Sent from my SCH-I535 using Tapatalk
Anyone know where I can find such a list?
Thanks!
Sent from my SCH-I535 using Tapatalk
List of 20/1 threaded mods and attys?
- Thread starter jwat82
- Start date
- th_trl_thread_readers 0
- Status
Can't help you with a complete list. I can name a couple and while at it give you a bump, tho 
Don't risk your life on this being true. Do double check before spending any money.
-Gus
-Paps
-Caravela
-JM22
-Hamoriko (Blame Todds ecigreview if this isn't so)
-BaGua
-Element mod (? according to Vaperev it's 20x1)
If I'm not entiiirely mistaken, the Art of Exhale titanium hybrid also use 20x1. Not sure where I read that, so don't take my word for it.
Don't risk your life on this being true. Do double check before spending any money.
-Gus
-Paps
-Caravela
-JM22
-Hamoriko (Blame Todds ecigreview if this isn't so
)-BaGua
-Element mod (? according to Vaperev it's 20x1)
If I'm not entiiirely mistaken, the Art of Exhale titanium hybrid also use 20x1. Not sure where I read that, so don't take my word for it.
Awesome! Thanks. I already knew many of those. I was just curious because I purchased an atom elite which is 20/1 and have my eyes on a vanilla which is also, and just wanted see what sort of 20/1 "accessories" I could get.
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
Hybrid adapter. There's a few of these from different manufacturers.
Luxe dripper.
Versa dripper.
Upcoming GP Heron.
Senio dripper. (no idea if they're available)
Would love to know of more.
Luxe dripper.
Versa dripper.
Upcoming GP Heron.
Senio dripper. (no idea if they're available)
Would love to know of more.
Last edited:
Can't help you with a complete list. I can name a couple and while at it give you a bump, tho
Don't risk your life on this being true. Do double check before spending any money.
-Gus
-Paps
-Caravela
-JM22
-Hamoriko (Blame Todds ecigreview if this isn't so
-BaGua
-Element mod (? according to Vaperev it's 20x1)
If I'm not entiiirely mistaken, the Art of Exhale titanium hybrid also use 20x1. Not sure where I read that, so don't take my word for it.
It would be awesome to know the tube lengths of these mods as well. Even though they might have the same 20/1 threading, not many of the buttons and top caps are interchangeable. I tried to stick my Paps 2.5 switch and top cap on my Caravela clone tube (18350), but the tube was a few mm too short for a battery to fit.
Is there a list somewhere that has tube lengths of various 20/1 mods?
I wouldn't know all of them, but I can always whip out my calipers.
Gus Telescopic tube: 53mm shortest / ~80mm before threads show
Gus 18500 tube: 65mm
Paps 2.5 18350 tube: 50mm
18500 tube: 66mm
Give or take a millimeter. It's not the bestest calipeters ever.
It's the specifications for the threading used to screw on cap and button. 20mm diameter and 1mm thread spacing, I believe. I may be mistaken. Anyway it's an indicator of mods (and atties) using the same threading.
Edit: Hah too late.
Ah, ok so it's threading spaced 1mm between threads and totals 20mm depth/length inside tube (or on atty)?
What about ID? Are they all the same, a set standard between mods? Even though they'd have the same threading, would they still fit if the ID is different? Hmm, that's actually kind of a silly question since they all take 18XXX batteries.
What about ID? Are they all the same, a set standard between mods? Even though they'd have the same threading, would they still fit if the ID is different? Hmm, that's actually kind of a silly question since they all take 18XXX batteries.
I believe 20mm is the ID, as none of mine go 20mm deep into the tube.
You can essentially take the button or cap off of one 20x1 mod and put it on another. As pointed out in an earlier post, tho, tube lengths may prevent you from making actual contact with the battery at both ends. Or prevent you from screwing it perfectly together.
Currently my Paps has a hybrid adapter that also fits my Gus, while my Gus has the top cap and center pin from the Paps. The Paps center pin actually fits the Gus top cap as well. Both caps use the same threading as a M5 screw. Sometimes I use the Paps button with the telescopic tube from the Gus. Nice being able to mix it up a little.
You can essentially take the button or cap off of one 20x1 mod and put it on another. As pointed out in an earlier post, tho, tube lengths may prevent you from making actual contact with the battery at both ends. Or prevent you from screwing it perfectly together.
Currently my Paps has a hybrid adapter that also fits my Gus, while my Gus has the top cap and center pin from the Paps. The Paps center pin actually fits the Gus top cap as well. Both caps use the same threading as a M5 screw. Sometimes I use the Paps button with the telescopic tube from the Gus. Nice being able to mix it up a little.
Last edited:
Ok, got it.. tnx.
Yeah it would be nice to be able to interchange some parts. I only have two 18350 mods right now though (and a 14500), a Caravela clone and a Paps Lux, neither of which work with each other (the Vela tube is quite a bit shorter than the Lux).
I have a spare partial Paps switch (missing button and spring).. maybe I'll order those and find a top cap and tube somewhere and build a frankenstein. Good to know any 20/1 parts will fit though.
Yeah it would be nice to be able to interchange some parts. I only have two 18350 mods right now though (and a 14500), a Caravela clone and a Paps Lux, neither of which work with each other (the Vela tube is quite a bit shorter than the Lux).
I have a spare partial Paps switch (missing button and spring).. maybe I'll order those and find a top cap and tube somewhere and build a frankenstein. Good to know any 20/1 parts will fit though.
I wish a u adapter was made for this threading kind of like the kayfuns sticker anyone want to create one for me?
anyone want to create one for me?
Hamoriko is a definite yes as I mixed and matched it with other stuff. BBM Lycan is as well. Apache mech is one I haven't seen mentioned.
BaGau and vela's both have shorter tubes than say Paps. You can use paps tubes with bagau stuff but may need a spacer to eliminate rattle. The reverse does not work in my experience. Also, since bagau's vent through the switch and paps through the tubes...you'd have a sealed up mod.
BaGau and vela's both have shorter tubes than say Paps. You can use paps tubes with bagau stuff but may need a spacer to eliminate rattle. The reverse does not work in my experience. Also, since bagau's vent through the switch and paps through the tubes...you'd have a sealed up mod.
20 mm x 1.0 = 20 mm diameter with one thread per 1 mm (coarse)
20 mm x .75 = 20 mm diameter and one thread per 3/4 mm(fine)
20 mm x .50 = 20 mm diameter and one thread per 1/2 mm(super fine)
Ect.
Can someone list the maker and mod of the clones that have th 20x1 threading? I know if the clones of the listed mods are exact 1to 1 copies then they should fit but there are carvela clones and others out there that dont. So being poor and wanting a 20x1 clone set of tubes is almost impossible without others input because no one advertises clone thread sizes :/
- Status
Similar threads
