Looking For A CE2 For a Torpedo Tank....
- Thread starter MegaT4ever
- Start date
- th_trl_thread_readers 0
- Status
Hmmmm, nobody knows where to get a CE2 that will fit a Torpedo tank? Im sure there are some Torpedo Tank users out there.... Come on...
jonah suggested cutting the stainless steel ce2. but actually the fluxo ce2 stem /will/ work in the torpedo. but you need to remove the white o ring from the base and replace with something heavier. i'm using spare rings included when you buy the superT drip tips.
I do not have the tordeo tank but i may be of help since im familar with ce2 tanks and cutting the ce2s with a mini pipe cutter out of there stainless tubes for my tanks that i use.
First is your torpedo tank the one with stainless end caps that i see on vapor -age website that comes in mini and reg size ?
Which size tank do you have ?
First is your torpedo tank the one with stainless end caps that i see on vapor -age website that comes in mini and reg size ?
Which size tank do you have ?
Last edited:
I have the regular size one with the stainless steel caps, I have contacted Jonah to see if he has any that has come in but no response yet... Thanks for the responses...
I can't speak on how this site is or how much shipping is ect... but the sell cut (for the torpedo) and uncut CE2's in both lengths..the cut ones are kind of pricey but the packs that come in long and short aren't bad. I take it you need the regular short CE2? they sell them there and says they are in stock..IDK if I would buy from them looking at the site...
510 Ce2's
Cut CE-2 for Torpedo Tanks
Edit: there is a note on the home page that says something about BoA shutting down there credit cards and only accepting money orders..so I would skip them...
510 Ce2's
Cut CE-2 for Torpedo Tanks
Edit: there is a note on the home page that says something about BoA shutting down there credit cards and only accepting money orders..so I would skip them...
Last edited:
Mega ce2s come in only 2 lengths regular and XL. So one of those should fit your tank .
Now with ces2 that top porcelain cup does have some play in it going upwards or down not a lot but a little.
If your ce2 is close to fitting your tank you can gently with finger pull it up or push it down, the keyword is "gently".
Parkesvaping is the cheapest that i seen that sells the ce2s precut at 4.00 in reg or xl size and in different ohms.
I used to buy the precuts ones now i buy the stainless tubes that therre in and cut them out with a mini pipe cutter as its cheaper for me this way.
yeah. wasn't a problem for me though. just do the 'money order' and follow up with payment via paypal.
Well ya this is where i got the Torpedo in the first place but he doesnt have any CE2 in stock right now so this is why I was asking around if anyone knew where to get any...
where do I get the Fluxos? I have been on the site before but I never bookmarked, Thanks...
Found web site, thanks for all replies!
Found web site, thanks for all replies!
Last edited:
Will these work? Sorry i just wanna make sure the bottom will fit into the round part of the steel end cap before I buy it.
Ready Made Cut E2 For MAP Tank 2.4 ohm
Ready Made Cut E2 For MAP Tank 2.4 ohm
i think so. looks like a cut xl ss ce2 stem. should be right for the large torpedo. drop a mail to vapor-age to be sure tho.
Oh I didn't know and the site says in stock on both..another reason to not go back to that site...
Just letting people know that I did end up getting these Ready Made Cut E2 For MAP Tank 2.4 ohm and works like a charm! I can now vape again instead of just dripping drip drip now I have these ce2 laying around that wont fit my tank, any ideas on what to do with them????
Those are just stainless tank CE2 that have been cutoff..you could buy a inexpensive pipe cutter at just about any hardware or auto parts store and cut them off yourself. Just be careful when removing the tube to not pull out the wires as the rubber cup sometimes sticks..also careful not to twist when cutting. You can remove the tube before cutting and press it back on pretty easily.
If I ever build a tank mod I plan on making it fit CE2's without a tube at all as I plan on just drilling the hole to fit the ridges where the tube goes..probably best to use the CE2 cleaomizers for my tube mod idea as all of them have an o-ring above the ridges..only some of the metal CE2 tubed ones have the o-ring as the metal tubes are pressed more tightly and don't need a o-ring to prevent leaks I believe. I think they probably only use the o-ring ones with metal tubes when they run short of the other kind probably.
To remove a CE2 tube remove the cap,the top o-ring then attach it to an eGo battery and with some force wiggle the tube back and forth until it starts to come loose..when it starts to come loose I'm careful that the cup doesn't stick to the ceramic and pull the wires. I use a syringe plunger without the rubber deal to push out the rubber cup most of the time. With some practice CE2 tubes can be removed in seconds. I take mine apart all the time for cleaning and burning off the wick..makes them almost as good as new and I have a couple CE2's I've been using for months.
Sorry if this is off topic, but can someone point me to a place that has CE2 tanks in stock? My wife loves clearos and wants a tank with that performance, and she's given me this as a research assignment. Thanks!
i'm a huge torpedo fan, but if it's for your wife, check out the phiniac pyrex tanks. beautiful. i'm working up to buy one.
pretty sure the phiniac can work with either stainless cut ce2 or 'naked' fluxo stems with some better o-rings. but would be great if someone can confirm that.
pretty sure the phiniac can work with either stainless cut ce2 or 'naked' fluxo stems with some better o-rings. but would be great if someone can confirm that.
This is where I got mine: Torpedo Tank Stainless Steel I think his CC system is down right now but I think if you email him he can work up a paypal for ya I got mine from him and its great Just remember to buy the spare o-rings for it cause the stock orange ones dont do it any good...
- Status
Similar threads
