Looking for a decent atomizer. Please recommend me something.

[RottenJeeves]

Hey guys,
I am tired of cheap disposable atomizers that makes all my juice taste like burnt electronic goop. I am looking for something decent, doesn't have to be rebuildable, just something nice.

What do you guys recommend?

edit: forgot to mention that I am using vamo currently.

Thanks in advance.

 

[Johnnie Price]

The 306 is extremely popular for dripping, though I haven't tried it myself. The 901 is good, but a drip shield is essential.

What have you tried?

 

[Vash]

Ikenvape attys are great

 

[RottenJeeves]

The 306 is extremely popular for dripping, though I haven't tried it myself. The 901 is good, but a drip shield is essential.

What have you tried?

Just some cheap 510 smoketek 2.0 ohm attys.

 

[BigCypress]

avidvaper.com hh357 cisco spec or the aero

 

[Dougiestyle]

A7 rba- ~$20
Wick- ~$5
Wire- ~$5
Never buying another disposable- Priceless!

 

[RottenJeeves]

A7 rba- ~$20
Wick- ~$5
Wire- ~$5
Never buying another disposable- Priceless!

What kinda/size of wick and wire?

 

[Dougiestyle]

Any type of wick will work, as demonstrated by users, here on ECF. Some use cotton, silica, Nextel ceramic, SS, etc. The spacing of the posts above the air hole allow most any wick to be used.

As far as wire, that's a vairable that falls under "Taste is subjective". Any Nichrome or Kantahl wire can be used. I have several different gauges of each and use them all without discretion.

There are threads regarding the A7 sprinkled about the appropriate forum area that will enlighten your attempts to get it started, but it comes pre-wicked and wired when you receive it.

I think the best parts of it are the well-machined assembly of SS parts that are able to be completely disassembled for cleaning at will. Another plus is that you never have to worry about leakage of excess liquid through the side-hole (it doesn't have one!). Airflow comes from the bottom, just like regular atties/cartos. There is room inside for ~20 drops of nicquid. With raised air passage, no worries with niquid getting down, into the connector unlees you go hog-wild with your dripping lol.

I use mine on my homemade VW bottomfed boxmod. Oh yeah, it's shiiiny polished, too!

 

[Thrasher]

im with the cat, get a decent rebuildable dripper they are not hard to set up, never stuck if it burns out, and supplies cost pennies per setup. i use 30g kanthal and 3mm silica wick in mine. takes about 10 minutes to replace a coil - cut the wick wrap a coil on it screw in place. vape

the two catching my eye right now are the IGo and the choice with the choice in front because of the adjustable airflow.

you will never want to pay 3-7 bucks for something you throw away again.

but in the past i used the 306, 357 and my fav was the i06

 

[Unforeseen]

Moved to Assorted PV Topics - Atomizers and Cartridges

 

[cmatt80]

Go with a rebuild once you learn how to setup you won't look back I just got the aga t2 now I'm going to order a drip style rba next

 

[RottenJeeves]

Thanks for all the info guys I have a lot too look at and I can clearly see I bit off way more then I can chew. I need to watch some videos or something and learn how to do some of things mentioned. I dont even know where to start now. :/

 

[Skyway]

Almost any atty from Avid or Ikenvape will perform miles beyond that smoktech. I have used all of the Cisco spec atty's with great joy along with a couple from Iken. The all work very well. Even a standard Joye 510 isn't too bad but the others will out perform it.

 

[luvinit]

I just bought AvidVapers two attys and drip tip deal, SR 510 to use on my Twists. Hands down the best attys I've got. I, too, used to buy the cheap disposable ones, and have never had a decent vape out of any of them. I get nothing BUT good vapes out of these 510s from avid. My next investment will be the HH357.

 

[niczgreat]

I'm partial to the Empire 1.5 or 1.8 bridgeless atty.
They are very forgiving of overdripping and taste great.

 

[Horselady154]

Definitely get a bridgeless atomizer.