looking for the perfect mod

[ethanand]

Hello, I am looking for the perfect mod here is what I am after;
*Must be USB chargeable (I don't mind if it requires batteries just don't want to use a battery charger)
*Big clouds
*Must work with the Uwell Crown tank
*Wattage control (preferably higher than 100)


I had a Kangertech subox and I really enjoyed it but I dropped it lol, so do you guys have any suggestions it would be much appreciated, I don't care about price as long as it's the best you can suggest I'll be happy

 

[Eitje]

Are there mods that don't work with the crown tank?
Anyway...
Joyetech Cuboid? Only set back is its weight but considering your habit of dropping mods, might not be a bad thing. Does everything and has a lovely display. Joyetech also one of the very few vendors that regularly provides firmware updates with worthwhile improvements.

 

[Mike 586]

Some assembly required.

 

[WharfRat1976]

Hello, I am looking for the perfect mod here is what I am after;
*Must be USB chargeable (I don't mind if it requires batteries just don't want to use a battery charger)
*Big clouds
*Must work with the Uwell Crown tank
*Wattage control (preferably higher than 100)


I had a Kangertech Subox and I really enjoyed it but I dropped it lol, so do you guys have any suggestions it would be much appreciated, I don't care about price as long as it's the best you can suggest I'll be happy

ECF and BING are you friend[emoji12]

 

[Douggro]

Are there mods that don't work with the crown tank?
Anyway...
Joyetech Cuboid? Only set back is its weight but considering your habit of dropping mods, might not be a bad thing. Does everything and has a lovely display. Joyetech also one of the very few vendors that regularly provides firmware updates with worthwhile improvements.

I like the Cuboid but Joyetech doesn't recommend USB charging.

If you want a mod that supports balanced USB charging, you're looking at anything with the DNA200 chip in it. Given the cost of those units, buying a dedicated charger and extra batteries for a "conventional" regulated mod would be more cost-effective.

 

[Dipper926]

Hello, I am looking for the perfect mod here is what I am after;
*Must be USB chargeable (I don't mind if it requires batteries just don't want to use a battery charger)
*Big clouds
*Must work with the Uwell Crown tank
*Wattage control (preferably higher than 100)


I had a Kangertech Subox and I really enjoyed it but I dropped it lol, so do you guys have any suggestions it would be much appreciated, I don't care about price as long as it's the best you can suggest I'll be happy

My advice, look up the Rouleau RX 200. I've had a few istick, a Sigelei Fuchai, X Cube 2, and the Rouleau rx200 is the best regulated I've had, both performance, cost effectiveness, and ironically it glorious to use as a stand while you build and wick.

I would like to also add, that because of its shape, as well as the size, and the weight, it's very hard to drop. It just fits in your hand as if it's meant to be held , not an intentional pun.

Sent from my SM-T800 using Tapatalk

 

[suprtrkr]

The best USB charging mods have the DNA200 boards. You can buy a Reuleaux DNA200 mod for about $140, plus another $25 or so for three batteries to fill it. The problem is, you can buy two Reuleaux RX200s, half a dozen batteries and a 4-bay Nitecore D4 charger for less money. Unfortunately, the RX200s don't do balanced charging well. Up to you. Most medium and high quality mods offer USB charging. Few, if any, recommend it. You might look at a Smok Koopor Plus if you're determined. It's bigger, heavier and more expensive a RX200, but it's supposed to do balanced charging fairly well. I have the mod, and it's a great piece of gear, but I can't speak to the charging. I don't do that.

 

[Light Seeker]

Theres only a very few mods that make Big Clouds. And even less that work with the Crown.

 

[ethanand]

Thanks for the suggestions everyone, will be checking them now

 

[Eitje]

I like the Cuboid but Joyetech doesn't recommend USB charging.

If you want a mod that supports balanced USB charging, you're looking at anything with the DNA200 chip in it. Given the cost of those units, buying a dedicated charger and extra batteries for a "conventional" regulated mod would be more cost-effective.

Out of curiosity ...Where did you get the part of joyetech not recommending USB charging?
It charges fine, even if the batteries aren't identically charged to begin with.
My external charger does it in half the time but the end result is the same.

 

[Douggro]

Out of curiosity ...Where did you get the part of joyetech not recommending USB charging?

It's in their manual, near the end, recommending that you remove the batteries and use a separate charger.

 

[Eitje]

It's in their manual, near the end, recommending that you remove the batteries and use a separate charger.

Ah yes they kindly suggest to do so
Never read the manuals obviously.

 

[Sidsgothem]

Ah yes they kindly suggest to do so
Never read the manuals obviously.

nearly every company's mod will have something about not recommending to use the usb as a way to charge....i personally think it's moreso a liability issue....but there are some people who have had issues due to it..so whose to say...honestly..i've seen people say the rx200 isn't compatible with the TFV4...because the pin on the TF is too large...only issue i can see with it is if your one of the dopes that pushes it to the point you want to tighten it to the mod like it's a bolt...stop at resistance and you're good...don't over charge batteries...change the positions ect...take care...if you're too lazy for that...get the battery chargers...

 

[Paul lamb]

Tesla nano 60w internet lipo
Tesla 100w internal lipo

Both amazing mods

Or if money is no option get a Dan 200 all can be charged via usb

 

[Paul lamb]

Internet?

Internal

 

[Douggro]

Internet?

Internal

You do see that little "Edit" link at the bottom of your posts, right?
ETA: Dan 200 ??