LR attys?

[menaice]

Ok first the good... 6 days from china to NC? good job east mall thats pretty quick... Love the drip tips..

I order 10 emLR attys. I must say i have tried other LR attys and they perform way better... These LR attys are performing just like my standard 510 attys?? what is the deal with that.... They do work... but no where near the vapor production of other LR attys i have tried. I dont' get it... they have the LR stamp on it. I know my batteries are fully charged and functional I have tried it on 4 different 510 batteries and it seems as thou they are not performing like a LR should. I have another LR atty from another company that i put back on to try and instantly you can tell the difference... I have tried 2 of the emLR attys and they both perform the same... Is there some kind of mix up? I would say for a regular 510 atty they are excellent but for a LR i just don't know whats going on here

Maybe i am doing something wrong... i just dont know

 

[doots]

The only way to see for sure is to put a meter on them and report what resistance you have. Maybe there is a mix up some how.

I have had lots of these from EM and all have been good.

 

[menaice]

Alright i have a multi meter.. is there a post or a youtube vid that shows how to test an atty? i searched the forums and did a google search.

 

[harpo]

Put one lead on the center pin of the atomizer and the other on the threads of the atomizer. Set your multimeter to ohms and report back with what it reads.

 

[menaice]

it reads 1.6

 

[doots]

it reads 1.6

1.6 is about where it should be for LR 510s they sell.

Sounds like your batty might not be giving you what you need..

If you are using these on a 510 battery you arent going to be happy as they start at 3.2v and go down from there. You need more towards 3.7-4.2v to stay steady at that voltage to be a happy camper.

 

[menaice]

Ahhh ok, thanks for the help. I have a TW tornado


Just tested the battery and its reading 3.6 but still might need to go with something like a 5volt mod.... something along the lines of the Little sister or GLV2

 

[doots]

Ahhh ok, thanks for the help. I have a TW tornado


Just tested the battery and its reading 3.6 but still might need to go with something like a 5volt mod.... something along the lines of the Little sister or GLV2

The TW should work ok with the LR. Have you tried more than 1 atty or do you have just 1? I thought you had a little 510 battery.

 

[harpo]

Ahhh ok, thanks for the help. I have a TW tornado


Just tested the battery and its reading 3.6 but still might need to go with something like a 5volt mod.... something along the lines of the Little sister or GLV2

You don't want to use a LR atty with a 5 volt mod you'll burn the atomizers up.

 

[menaice]

i bought 10 of them, i have tried 2 so far cause the first one i tried seemed just like my reg. 510 atty, so i grabed another to try and the same thing.... dunno. They are vaping just fine, but it doesn't seem to produce what i was getting out of the SLB (i think) from Madvapes LR atty for some reason

 

[harpo]

How long have you been using the two atomizers? Some take a while before they perform at peak performance. I've tried every LR atty on the market and like the EM ones the best. Make sure you not dripping too much liquid in them.

 

[doots]

How long have you been using the two atomizers? Some take a while before they perform at peak performance. I've tried every LR atty on the market and like the EM ones the best. Make sure you not dripping too much liquid in them.

Very true Harp. Too many drops will kill the vape for sure. There is also a break in period for the ones I have had.

 

[menaice]

this is good to know... like i said i just got these yesterday i am using it now and will continue to use it. I normally drip 3 drops into the drip tip, flick the tip and blow down the hole real quick before vaping it. Maybe in another day or so it will break in.

 

[harpo]

this is good to know... like i said i just got these yesterday i am using it now and will continue to use it. I normally drip 3 drops into the drip tip, flick the tip and blow down the hole real quick before vaping it. Maybe in another day or so it will break in.

Give them some time. Plus make sure you're not over dripping.

 

[harpo]

These things are work horses. I can't seem to burn one up and I'm hard on atomizers. The longest any other LR atty has lasted me is a week. I'm still using my first EM one for 2 months now.

 

[Jumi]

True, they need some time to break. I have opened four, the first broke immediatelly (LR510), the second needed 20 minutes (LR901), the third 4-5 hours (LR510) and the fourth immediatelly (LR901) on a mod with a fully charged 18650.

After they break, they work great.

 

[Di]

Hi Jumi -

my new friend - hahaha

 

[Di]

These things are work horses. I can't seem to burn one up and I'm hard on atomizers. The longest any other LR atty has lasted me is a week. I'm still using my first EM one for 2 months now.

True, they need some time to break. I have opened four, the first broke immediatelly (LR510), the second needed 20 minutes (LR901), the third 4-5 hours (LR510) and the fourth immediatelly (LR901) on a mod with a fully charged 18650.

After they break, they work great.

Thanks for all this help for this member you guys,

I agree with you-

these are very good LR attys,

they do take a little breaking in with some of them--
with others - they seem to go good right away-

they last a long time,
more than 1 and sometimes even 2 months --
and are hard to kill-

they work best with a good strong 3.7 to 4.2 battery
the capacity must be - 450mah minimum ---
and a steady current flow is best of course-----

I find the 18650 on the Indulgence,
OR the RiVa ----- is the perfect fit for these LR attys
both of these battery
give a strong good power for these LR attys.