Made in the USA by local manufacturers ?

[Krys]

Hello everyone,
I have been lurking around on the forum for couple of days now and meanwhile I learned a lot. Now, I think it is time for me to make my own post and ask some questions I already have some experience with my first PV. I received my first PV as gift, it is from Europe. The brand name is ECIS JKY901 (BG1006 inside of the battery). I also have 2 e-liquids 50ml each, one high the other medium plus 10 cartridges. I am quite satisfied with overall performance of this device and the taste is not too bad, I do not smoke analogs since I have got it. I am currently looking for something better. I would like to have something with good battery that will last longer, right now I have to charge my battery few times a day since my second battery already died. The diode burned and it smells a little like acid. I think that the air sensor stuck inside, because when I checked the battery with voltometer it displayed 3.7 volt. Then, I checked it with atomizer and it turned out it was constantly working when connected to the battery, since then I did not charge it or use it, I consider it broken. Another thing is, I would like to have a bigger cartridge, but it is not a must. I can always have e-liquid with me to refill. I was thinking about USA made PVs. Could someone provide me with names or links to USA made PVs ? I already found that The Precise is made in the USA. Are there any other PVs made in the USA ? Similar question about e-liquids? Which e-liquids are made in the USA? Is tastyvapor trustworthy ?

 

[mistinthewoods]

Hi Krys, welcome. So far there are no American companies making a regular ecig. All of the attys and cartomizers come from China. There are lots of battery mods made in the USA though. Lots of juice is mixed here too. Tastyvapor is very trustworthy and highly regarded on this forum. I mix my own juice. I started mixing a month after I started vaping. I start with a 60 mg concentrate in PG I get from here UnFlavored Smoke Juice - MFS Inc.
then I add VG from the drug store (diluted with 5% distilled water to thin it) and flavorings from here Perfumers Apprentice - Professional DIY Flavors
This way I know exactly what's in my juice and it's made as locally as it gets. It's made in my house.

 

[Krys]

Thank you for your reply. I think I might mix e-liquid by myself eventually, but for now I will buy some instead. I will add one more question, are there any metal cartridges ? I do not like plastic.

 

[mistinthewoods]

There are metal drip tips. These are tips you use without any filler material. https://www.vaporkings.com/SearchResults.asp?Search=drip+tips You just drip 3 or 4 drops through the end and vape that and then drip some more. Lots of people prefer this technique and claim the flavor is enhanced this way.
I prefer using cartomizers. These are cartridges with the atomizer built in. They are steel tubes covered in a kind of plastic tape with a plug in the end. They hold more juice so you don't have to fill them as often. To use them with the 901 you'll need an adapter. For the kr808 cartos you'll need this one 901 Battery to 801 Atomizer adapter and to use the 510 cartos you'll need this one. 901 Battery to 510 Atomizer adapter
I looked up the model you said you have to be sure and determined that it's the same as the DSE 901, it's just made by Boge instead of SLB so anything 901 native should work fine with it.

 

[D4rk50ul]

Well I've been looking at a few, here are the names that I'm considering. Also you can use the link below to see a vast collection with nice links to each site.

http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/78628-side-side-comparison-e-cigs-mods.html

ProVape-1
GLV2
The Buzz
Chuck
Little Sister
The Precious
GGTS
Icon

 

[Silkies70]

Hello everyone,
I have been lurking around on the forum for couple of days now and meanwhile I learned a lot. Now, I think it is time for me to make my own post and ask some questions I already have some experience with my first PV. I received my first PV as gift, it is from Europe. The brand name is ECIS JKY901 (BG1006 inside of the battery). I also have 2 e-liquids 50ml each, one high the other medium plus 10 cartridges. I am quite satisfied with overall performance of this device and the taste is not too bad, I do not smoke analogs since I have got it. I am currently looking for something better. I would like to have something with good battery that will last longer, right now I have to charge my battery few times a day since my second battery already died. The diode burned and it smells a little like acid. I think that the air sensor stuck inside, because when I checked the battery with voltometer it displayed 3.7 volt. Then, I checked it with atomizer and it turned out it was constantly working when connected to the battery, since then I did not charge it or use it, I consider it broken. Another thing is, I would like to have a bigger cartridge, but it is not a must. I can always have e-liquid with me to refill. I was thinking about USA made PVs. Could someone provide me with names or links to USA made PVs ? I already found that The Precise is made in the USA. Are there any other PVs made in the USA ? Similar question about e-liquids? Which e-liquids are made in the USA? Is tastyvapor trustworthy ?

Try the JOYE302 penstyle ecig. Bigger battery than the 510 and larger atty. You'll get at least 3 to 4 ours of vaping before you need to change it out. Also, if you are the type that is infront of a computer alot, go with a usb passthrough.

 

[son et lumiere]

If youre looking for something with a big cart try the ego with an XL Cart.

 

[jburns3]

I have been wanting to try the Buzz. Something I can adjust the voltage

 

[Krys]

I already found the one for me http://www.e-cigarette-forum.com/forum/new-members-forum/116677-i-pulled-trigger-i-ordered-my-upgrade.html