Man (Omega) Down ..... Need Help !

[Mistaree]

sometimes my atomizers dont work on my omega but do on my other devices

the fix is to look at the bottom of your atomizer that connects or touches the connecting part of the omega..(the circle.part with the hole in it) and using a super tiny screwdriver..i lift it up slightly. the attie just isnt making a connection with your omega

there was a thread on it ...but im on the cell. let me know if it works.or if you have any questions

Nope that's not it either
Been using the same 2 atomizers with it since Saturday ! one LR Boge & one CE2 rev5 .
I was vaping 1 sec & it didn't fire the next , I'm going crazy wit this thing right now

 

[nocturn4l3030]

Nope that's not it either
Been using the same 2 atomizers with it since Saturday ! one LR Boge & one CE2 rev5 .
I was vaping 1 sec & it didn't fire the next , I'm going crazy wit this thing right now

well if it's not working on the omega but it does on the other devices, couldn't hurt to try? it won't ruin it so that you can't use it on your other PVs or nothing... the omega is all mechanical, there really isn't much to go wrong with it. i would suggest just trying it ;D

 

[nocturn4l3030]

Nope that's not it either
Been using the same 2 atomizers with it since Saturday ! one LR Boge & one CE2 rev5 .
I was vaping 1 sec & it didn't fire the next , I'm going crazy wit this thing right now

also by screwing it in too tight, which is kinda easy to do on the omega, sometimes you can accidentally push the pin too far which would also cause it to work in the beginning, but stop suddenly

 

[Mistaree]

also by screwing it in too tight, which is kinda easy to do on the omega, sometimes you can accidentally push the pin too far which would also cause it to work in the beginning, but stop suddenly

Nope not that either
For some reason I don't think the connection pin in the switch is making contact
Any ideas on how to fix that ?
When I press the switch down , the pin is flush with the black plastic thingy , is it supposed to be like that ?

 

[nocturn4l3030]

Nope not that either
For some reason I don't think the connection pin in the switch is making contact
Any ideas on how to fix that ?
When I press the switch down , the pin is flush with the black plastic thingy , is it supposed to be like that ?

im telling you..its happened to me before. an atomizer was working then stopped..so then i did what i showed you and its all good again.

anyway gl in fixing it, robs a super nice and helpful guy, let us know how you end up fixing it

 

[squirrel64]

http://www.e-cigarette-forum.com/forum/altsmoke/110635-omega-problems-2.html

try this thread, might help

 

[Overlord]

If you're unsure how to break down the switch and reassemble it, here's Chads How To video.

So simple!

Omega Switch How To