MEGA SMART CART V2.0 INSTRUCTIONS , TIPS, VIDEO & PICTORIALS - GotVapes.com

[badkolo]

GotVapes V2.0 Mega Smart Carts Instuctional & Product Info
​

Instructions

1. You receive 5 Individually wrapped Mega Smart Carts V2.0 in a white box.

2. After Removing the Mega Smart cart from the package remove the plastic rubber piece that is at the bottom of the Mega Smart Cart.

3. Using any pointy Tweezers, Pin, Nail Clipper etc.. Pull out the filler that is at the bottom of the Mega Smart Cart, You can use the filler just as it is or thin it out by removing some if your juice is thicker and you need it to wick faster with your thicker juice.

4. Either drip directly from your bottle into the Mega Smart Cart while holding the bottom face upwards or you can use our 15ml luer lock bottle with blunt tip or any syringe with any tip like a blunt tip or pointy one.

5. Squeeze about 1.4ml of juice into the Mega Smart Cart until the juice reaches the bottom of the Bridge where the Hole and slits are. Take your filler and press it together and place it inside the Mega Smart Cart on top of the bridge and its hole and slits and add an additional 5 to 6 drops to the filler to moisten it up completely.

6. Prep your Mega cone Atomizer by blowing out any primer from the battery end through the top and use a napkin to clean any excess primer followed by adding 4 to 5 drops of juice onto the bridge inside the Mega Atomizer.

7. Place your Mega Smart Cart V2.0 into the Mega atomizer with the flat sides of the Mega Smart Cart with the Flat sides of the Bridge in the Atomizer as described in the pictures Below..

8. Press the button on your electronic cigarette and take a nice long smooth drag and enjoy! The draw is much looser than a ego-t for comparison. When the Mega Smart Cart TANK Is empty follow the instructions to refill.

 

[dannoman]

Very nice Chris!

We've been really happy with the performance of the Mega SmartCart 2.0. Hope this helps every get optimal use of this product...

 

[Krispers]

Here is a great tip I just discovered for the mega smarts, If you use thicker juice *I dont but my order got muffed so I ended up with a lot of VG in it from another vendor* anyway If you use thicker juice, take your smart cart, pull the bridge out. Put the wicking material *polyfill* on the bridge and pull SOME through the hole in the bridge, then insert back in smart cart. Having the fill go in the hole will help pull it down to the rest.

 

[arjay55]

Any thoughts on carrying these smart carts, once they have proven themselves?

Apparently the button is used to push the juice through to the atty like a dripping motion. Sound good but like a lot of things, do they work out in the 'wild'. One ECF member wrote about it being in her eGo-Zerro kit and says it works great for her.

(If this post is inappropriate let me know and I will remove it)

 

[MsBree]

Any thoughts on carrying these smart carts, once they have proven themselves?

Apparently the button is used to push the juice through to the atty like a dripping motion. Sound good but like a lot of things, do they work out in the 'wild'. One ECF member wrote about it being in her eGo-Zerro kit and says it works great for her.

(If this post is inappropriate let me know and I will remove it)

It'll be like driving a stick shift....two buttons to push?? lol

 

[dannoman]

​

 

[dannoman]

Also if you push your blunt tip gently through the middle of the filler (approximating the area where the bridge fill hole is) when filling the tank you will automatically get a lil poof of the filler extend into the tank...thisi is a method to accomplish what you mention below without removing the plastic bridge in the tank...

Here is a great tip I just discovered for the mega smarts, If you use thicker juice *I dont but my order got muffed so I ended up with a lot of VG in it from another vendor* anyway If you use thicker juice, take your smart cart, pull the bridge out. Put the wicking material *polyfill* on the bridge and pull SOME through the hole in the bridge, then insert back in smart cart. Having the fill go in the hole will help pull it down to the rest.

 

[P-Dub]

Danno or Bad,
Any chance you will be offering up for sale JUST the mega cone attys? It seems that the 5 pac of smart carts might last longer than the atty. Doesn't seem necessary to purchase another 5 pac with a new atty. Just trying to think green and save a few bucks...

 

[badkolo]

we will get on that p-dub

 

[P-Dub]

Thanks Bad! Appreciate that.

 

[Bostonsnboxers]

Hi all,
Being a complete noob, when I placed my order I saw some of these smart carts and thought they'd be great for testing some of my new diy mixes for flavor, etc....got my order and wouldn't ya know, they won't work with my kgo atty What do I need to buy to be able to use these?

 

[antfuzz]

In my opinion the best way to test out new flavors is to use an atomizer. A few drops on the atomizer will tell you what the flavor is like. Easy to clean, you can just blow out or vape out the previous flavor.

 

[arjay55]

Hi all,
Being a complete noob, when I placed my order I saw some of these smart carts and thought they'd be great for testing some of my new diy mixes for flavor, etc....got my order and wouldn't ya know, they won't work with my kgo atty What do I need to buy to be able to use these?

You can use the 'Joye Style' regular or lr Type 'A' cone atomizer (or even the T-Rex works for me). These are excellent but can be a little messy when refilling, but not too bad using a pair of tweezers on the cotton pad. Some suggest using a syringe but I find it disrupts the air flow and can drown the atty a little. You know these are working best when one or two little bubbles rise to the top of the tank after a drag. If this isn't happening just rearrange the cotton pad a little and try again. Alternatively you can just pop the tank out a little and back in and this sometimes equalizes the pressure. These last me so long that the little cotton pad thing wears out and I replace with some medium density foam instead. Works great. Good luck.