- Status
Oh, i almost forget this, the mini davide
Yesterday i posted a thread about its brother Anyvape Davide Glassomizer.
Seems you are very familiar with Davide, especially the mini davide, would you mind share some key infos there?
Welcome:
http://www.e-cigarette-forum.com/fo...glassomizer-vs-protank-1-2-vs-puritank-2.html
Yesterday i posted a thread about its brother Anyvape Davide Glassomizer.
Seems you are very familiar with Davide, especially the mini davide, would you mind share some key infos there?
Welcome:
http://www.e-cigarette-forum.com/fo...glassomizer-vs-protank-1-2-vs-puritank-2.html
After I posted my thread I read your thread. I don't think anyone has used them yet. However, they should be out by next week. The way this tank looks I think I am sold on it. Forget the mini protank. This is basically what the Mini Protank 2 should be like.
The real question is why didn't Kanger make their mini protank like the Mini Davide. I feel like Kanger is always a step behind.
1 - the Mini davide seems to be the mini protank killer.
2 - the PuriTank is the ProTank Killer
3 - the PuriTank will compete withe ProTank 2
( ProTank 2 will be better in that it has no glue holding the glass and you can clean it better, PuriTank will be better in that it has less holes on the base, so no modding needed )
4 - The Davide Glassomizer seems like will beat both the ProTank 2 and the PuriTank. Only thing I am not sure of is how many holes does the Davide ( large size, not mini ) have in the base. If it has 2 holes like the PuriTank then this tank is the best tank.
The real question is why didn't Kanger make their mini protank like the Mini Davide. I feel like Kanger is always a step behind.
1 - the Mini davide seems to be the mini protank killer.
2 - the PuriTank is the ProTank Killer
3 - the PuriTank will compete withe ProTank 2
( ProTank 2 will be better in that it has no glue holding the glass and you can clean it better, PuriTank will be better in that it has less holes on the base, so no modding needed )
4 - The Davide Glassomizer seems like will beat both the ProTank 2 and the PuriTank. Only thing I am not sure of is how many holes does the Davide ( large size, not mini ) have in the base. If it has 2 holes like the PuriTank then this tank is the best tank.
I have seen them but I gonna wait til some reviews come out. I hope it does work I just can't stand that metal drip tip on the protank but love everything else about it. I do like that you can add bigger tubes to it. I wonder if the Protank 2 will add the same option?
New2vaps,
Just found on YouTube:
Anyvape Davide Glassomizer Disassembling Review - YouTube
It's 2 holes, right?
Just found on YouTube:
Anyvape Davide Glassomizer Disassembling Review - YouTube
It's 2 holes, right?
I saw your link on another post. Thank you for posting that link. This is exactly what tanks should be like. One thing I am not sure of is how many holes the base has. I looked really hard at the video but couldn't tell. If it is 2 holes like the PuriTank then this will be the best tank ever ( again, I am just speaking in theory, haven't tried it yet ) If it has 3 then only trying it will tell. But the Air Flow controller will solve any airy issue in a heart beat, so not really concerned too much. I can't wait to get my hands on this. By the way, these tanks were supposed to go on sale today but have been pushed back to july 30 for some reason.
i just got one of these, and yes it has 3 air holes. Darn thing is WAY too airy for me, need to figure out the best way to cover a couple of these holes I guess.
I have been using 2 of the mini davides for about a week now. I like them. I really can't tell much difference in it and the MPT. Maybe flavor is muted just a tad more on the MD but not much.
The MD is airier than my PT2. Other than that it works great on my 'vari.
You may need a syringe or bottles with the thin tips. The fill holes are a little on the small side.
You may need a syringe or bottles with the thin tips. The fill holes are a little on the small side.
I agree - it's tricky to fill, otherwise, an EVOD coil helps with airiness (is that a word?), also, try different drip tips (I have a hunch they might affect the airiness too, but only a hunch.)
love the airiness of the davide tanks, i can lung hit these glassomizers no prob 
if that isnt your thing, you could easily cover up the holes on the mini davide by applying a tiny dab of super glue on 1-2 of the holes on the skirt and letting it dry overnight
if that isnt your thing, you could easily cover up the holes on the mini davide by applying a tiny dab of super glue on 1-2 of the holes on the skirt and letting it dry overnight
I prefer the protank mini across the board. Too bad my gf broke mine and now they're unavailable. The davide mini is fine, just a little less convenient and fussy.
The Davide is way better than the Protank II to me personally. The pyrex is thicker and doesn't crack or break as easily and I like the wider selection of colors. The mini Davide over the mini Protank is a no brainer...ya get to use your own tips. I've had some problems with some of my tips working with the PT2, but not my Davide. And if you are having issues with the Mini Davide airy or flavor issue, take one or both of the lose coils out and it works much better. Taste wise, the Davide wins over the PT2 IMHO!
I definitely second this - I have both PT and Davide (full size) and the D comes apart completely, which the PT has now incorporated with the PT2 - overall the Davide just delivers a better taste for whatever reason in that they are both almost identical in terms of coil location.
really? I've heard from multiple unrelated sources that the davide has a very "off" taste. Some people has said it tastes like glue. I know PBusardo has said this in one of his reviews....but also I've seen several people mention it here as well.
Also, in case anyone is interested, the protank (the first one) has been upgraded. It no longer has any glue in it.
I'm almost ready to go with the Davide tank... but I can't seem t o find a vendor who sells replacement heads....!?? (even the ones who sell the Davide tank)
I know the PT heads are interchangeable on the Davide... is that what everyone is doing?
I know the PT heads are interchangeable on the Davide... is that what everyone is doing?
In a word, Yes. The PT2 heads work just fine in the Davide.
I own both the mini Davide and just got a PT2. Haven't used the PT2 yet, mainly because I got it to set on my new Vamo V3 (which I'm still waiting on), and the Davide is working perfectly.
It is an airy draw, but you get use to it. Plus, because on the mini the holes are on the skirt, you can cover 1 or 2 holes with your finger if it gets to you that much.
- Status
Similar threads
- Locked
