Mod a dual parallel box into series?

[mscott]

Not sure if this is right subforum but I'm toying with the idea of getting a cheap box mod that are oh so abundant and modding it into a series setup for some serious power vaping.

Take something like a Dimitri..would it be feasible to do?

 

[DaveSignal]

Its not feasible with a Dimitri 1:1 clone... this box has no wires and is fully mechanical.

You could mod your own series box though. Parts you could use:
Hammond 1590G or 1590B box. 1590B would be easier to do, 1590G is smallest that will still fit dual batteries.
A battery sled. A 510 connector. A switch. A MOSFET. Some wire.

 

[tj138waterboy]

Depending on how much power you are going for, I'm running dual parallel 7.4v-8.4v lipos. Can run in series if I modified my pigtail to make it 14.8v-16.5v. I have 18 amp protection in mine so if I did series it would top out around 315 watts on .85 ohm coil or if running in parallel on same coil it would be about 80 watts.

 

[Bad Ninja]

Best of both worlds and no modding required.
BC box mods dual 18650 switchable mod.
https://www.bcboxmods.com/product/dual-18650-switch-box-mod/?age-verified=0f0b12e5b1