modding questions for juicebox

[Nepherael]

Hi everyone. I'm new to ECF. For my rather large introduction refer to
http://www.e-cigarette-forum.com/forum/new-members-forum/132006-hi-everyone.html
for some info about me and a lot more.

Anyway here's the deal. For my first mod I'm going to make some sort of jukebox and I have a few questions.
- what size teflon tubing do I use and does anyone know a good vendor? Because I can't find tubing on any ecig site. Did get some hits on amazon. Oh and a part B to this question; is teflon tube best or a dif kind of tubing.
- what would I use for a bottom feeder? Brass tube? A long blunt needle? And what size and where to get.
- I have not tried anything but a 501 and lr306 but would anyone recommend a dif size for better flavor? I tend to smoke light flavors and sometimes I can't taste very well. It would be used with a 14500 or 18650 if that matters.
- and lastly. Should I to high voltage or low resistance? I know this is a subjective thing but i just want opinions.

Thank you ahead of time and I'm glad to be a part of the forums,
Neph


Edit: just wondering, can u use any carto/atty (510 901 801 etc)with any voltage or are they universal?

 

[asdaq]

Welcome aboard Neph! Just about all those items you listed can be used but here is a good place to start: http://www.e-cigarette-forum.com/forum/modders-forum/95728-tutorial-juicebox-around-8-a.html

Cheap, easy, and a quite straightforward tutorial to boot. Oh, and it is almost one stop shopping at a dependable vendor too.

 

[Nepherael]

Thank you for the welcome and the link. I actually have that bookmarks already. It'll be my go to for when I can buy the parts. But he used brass tube and I was wanting something flexible.

Also if anyone has opinions about some of the stuff I asked about earlier I'm also wondering what the difference is cartos/attys like 901 801 compared to a 510. Technical difference and also personal taste would be great. Personal taste as in which offers most flavor/ vapor

 

[WillyB]

the stuff I asked about earlier I'm also wondering what the difference is cartos/attys like 901 801 compared to a 510. Technical difference and also personal taste would be great. Personal taste as in which offers most flavor/ vapor

Start searching these forms, there are probably a thousand posts by now concerning your questions.

 

[misterD]

i rarely use any of the juice feeding systems (bottom feeding or suckaton) anymore. i either drip or use E2 cartos when im on the go.
bottom feeding decreases airflow. but i liked better teflon tubing from westfloridacomponents or msc industrial supplies over syringe needles.

 

[Nepherael]

Start searching these forms, there are probably a thousand posts by now concerning your questions.

Yeah I thought so. Just was makin it easier if someone was going to reply they could just add their say about it

 

[capecodjim]

Hi everyone. I'm new to ECF. For my rather large introduction refer to
http://www.e-cigarette-forum.com/forum/new-members-forum/132006-hi-everyone.html
for some info about me and a lot more.

Anyway here's the deal. For my first mod I'm going to make some sort of jukebox and I have a few questions.
- what size teflon tubing do I use and does anyone know a good vendor? Because I can't find tubing on any ecig site. Did get some hits on amazon. Oh and a part B to this question; is teflon tube best or a dif kind of tubing.
- what would I use for a bottom feeder? Brass tube? A long blunt needle? And what size and where to get.
- I have not tried anything but a 501 and lr306 but would anyone recommend a dif size for better flavor? I tend to smoke light flavors and sometimes I can't taste very well. It would be used with a 14500 or 18650 if that matters.
- and lastly. Should I to high voltage or low resistance? I know this is a subjective thing but i just want opinions.

Thank you ahead of time and I'm glad to be a part of the forums,
Neph


Edit: just wondering, can u use any carto/atty (510 901 801 etc)with any voltage or are they universal?

I can't help with your other questions but I can suggest the Puck as a great first mod. Mr. Puck has made it very easy with a great tutorial and parts from Radio Shack and a 901 atty. It's a great place to start experimenting.

I made a couple and modified one enclosed in a 4x AA box with an internal pump bottle juice feeder. I posted some details on my pump version here. Feel free to ask or PM for details.

edit - I wouldn't use brass with e-juice. There are pictures on the forum of the juice turning green from oxidation.

 

[Nepherael]

That is a bomb mod. Looks awesome. Also I've been searching all over the net to find out the difference between 510 801 901 etc and I still can't find anything except peoples opinions on what they prefer. I'm wanting to know what's different in technical terms. Resistance, size, and mostly just what's different about them that they're even around instead of having just one universal type of atomizer

 

[capecodjim]

That is a bomb mod. Looks awesome. Also I've been searching all over the net to find out the difference between 510 801 901 etc and I still can't find anything except peoples opinions on what they prefer. I'm wanting to know what's different in technical terms. Resistance, size, and mostly just what's different about them that they're even around instead of having just one universal type of atomizer

Thanks! and thanks for the PM!

I posted info on the bottle and pump here and that has links to the "Puck" and "Puck SD" mods on which this is based.

The Puck tutorial has info on basic parts, construction etc.... details of my pump bottle version are on the various threads.... construction on the Puck threads and juice feed on the spray bottle thread. Check them out and feel free to ask me any questions. I can put it all together in one place if it's not clear or too scattered.

 

[WillyB]

There is also Moonman's UPAC from 1 1/2 years ago.

And marlboro_man's.