Modification to Kanger atomizer?

Status
Not open for further replies.
Hello all. I have searched this forum and Google and Bing looking for people that know any possible modifications I can make for a better vape when I rebuild my Kanger 2.0ohm atomizers. I currently have been experimenting with simply taking both the wicks in a single coil and all three wicks in a dual coil and wrapping my 32 gauge kanthal around all wicks. The single coil atomizer with 8 wraps of kanthal wrapped around 2 2mm wicks have been working great (most of my vape friends say I should enter a vape cloud contest with my rebuilt coils since they put off huge clouds) but when I make the dual coil atomizer with 9 wraps of kanthal around all 3 2mm wicks, it takes forever for my tiny ego ctwist battery to heat the coil enough for vapor. (I know the ego ctwist is not that great, I have a Vamo V6 on the way). Also, when I am making my coil, I use a tiny sewing needle. I put the kanthal into the eye of the needle. While holding the wick and needle with one hand, I wrap my kanthal. Many people say this is hard to do, but I have not had any issues. BUT anyways, If anyone has a suggestion for me, please let me know. Thank you very much.
 

froginblender

Super Member
ECF Veteran
Verified Member
Nov 18, 2010
838
404
47
hollywood, Fl.
HOw about forgetting all that: and just buy the new Aspire BVC coils???
Has a cermaic type wicking material, that tastes the cleanest of all your choices.
10 bucks for 5 coils, each coil lasting at least 2 weeks.
Get yourself a nautilus mini, or any aspire tank.
just my 2 cents. good luck!

Hello all. I have searched this forum and Google and Bing looking for people that know any possible modifications I can make for a better vape when I rebuild my Kanger 2.0ohm atomizers. I currently have been experimenting with simply taking both the wicks in a single coil and all three wicks in a dual coil and wrapping my 32 gauge kanthal around all wicks. The single coil atomizer with 8 wraps of kanthal wrapped around 2 2mm wicks have been working great (most of my vape friends say I should enter a vape cloud contest with my rebuilt coils since they put off huge clouds) but when I make the dual coil atomizer with 9 wraps of kanthal around all 3 2mm wicks, it takes forever for my tiny ego ctwist battery to heat the coil enough for vapor. (I know the ego ctwist is not that great, I have a Vamo V6 on the way). Also, when I am making my coil, I use a tiny sewing needle. I put the kanthal into the eye of the needle. While holding the wick and needle with one hand, I wrap my kanthal. Many people say this is hard to do, but I have not had any issues. BUT anyways, If anyone has a suggestion for me, please let me know. Thank you very much.
 
mod.very sorry for posting in wrong area.
Penn...the coils are originally built at a 2.0...I am getting a 1.8 to a 2.0 with my rebuild.
Froggin..I didn't even know about the ceramic coils...I will have to look into them. As for the Nautalis tanks, I will have to wait for a paycheck to get something like that but I was thinking if I upgrade my tank...im going to get the BigDripper...an RDTA. I currently have 1 AeroMega....3 areotanks..and 3 protank2s. Only been vaping for a month and a half and I kinda went a little crazy with buying things off ebay.
JB...I will have to look into the cotton wick...and once again it will have to wait for another day since I just bought 100ft of 2mm silica...
 

FallenRawToast

Ultra Member
ECF Veteran
Mar 30, 2014
1,995
1,929
LA, CA, USA, NA, SOL

Monotremata

Ultra Member
ECF Veteran
Verified Member
Jul 15, 2014
1,662
1,744
Fontana, CA
monotremata.bandcamp.com
Make a microcoil and wick with cotton! Just started making em Wednesday but they blow the stock ones away! 5 wraps on a 1/16" screwdriver is getting me 1.8-2 ohms and they hit like a madman in my Protank 2 Mini! My full size PT2 will be here in the mail tomorrow and it will never see a stock Kanger coil now!

Sent from my SGH-I777 using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread