Happy Easter weekend, been kinda busy the last few days but I gots a new pretty. 
Mtbakervapor MBV Chat and Shenanigans
- Thread starter Stoneface
- Start date
- th_trl_thread_readers 0
- Status
Last edited:
Yeah I have had it for a few months (I think). I am really liking it. It has the best flavor I have had from an RDA asides from the really small chamber ones.
I have found that you can't build much lower than .6 on it. At least I can not. You obviously have looked at it. It does hold a good bit of juice. It does wick "genny style" so you can over run the wicks ability to fight gravity with 50/50 or thicker juice. I have no problems at .6 or above. WELL WORTH THE MONEY!!!! Vapor DNA has it and Vapor Joe has a discount code for it.
There is another I just ordered, you may be interested as well. Google Todd's review on the Hermes V2, if you like I can link you to the Google Doc to order from the manufacturer. Comes in Polished or Matte now. I have the Ant from Holy Land Mods due to show up first week of may and will be able to sit the Hermes on it first week of the next month.
In short bottom of the wick air feed RDAs are the bomb. Trying to figure out how to fit the Troy X from Fakir in this month as well Might have to catch it on the next run though.... That is a seriously well designed piece, can be RDA or RTA and it does not sacrifice in either mode. Catch Todd's review on it as well.
Hermes V2 90$ or under depending on finish choice. Month and 2 week wait
Troy X 100$ in stock at fakirmods as of earlier today.
and of course the Magma is in, watch where you buy it there are some really crappy clones out. Clones are Pinoy made and not from china
I have found that you can't build much lower than .6 on it. At least I can not. You obviously have looked at it. It does hold a good bit of juice. It does wick "genny style" so you can over run the wicks ability to fight gravity with 50/50 or thicker juice. I have no problems at .6 or above. WELL WORTH THE MONEY!!!! Vapor DNA has it and Vapor Joe has a discount code for it.
There is another I just ordered, you may be interested as well. Google Todd's review on the Hermes V2, if you like I can link you to the Google Doc to order from the manufacturer. Comes in Polished or Matte now. I have the Ant from Holy Land Mods due to show up first week of may and will be able to sit the Hermes on it first week of the next month.
In short bottom of the wick air feed RDAs are the bomb. Trying to figure out how to fit the Troy X from Fakir in this month as well
Might have to catch it on the next run though.... That is a seriously well designed piece, can be RDA or RTA and it does not sacrifice in either mode. Catch Todd's review on it as well.Hermes V2 90$ or under depending on finish choice. Month and 2 week wait
Troy X 100$ in stock at fakirmods as of earlier today.
and of course the Magma is in, watch where you buy it there are some really crappy clones out. Clones are Pinoy made and not from china
Oh forgot to add the things that are a Pita with the Magma
510 on mine is a tad long, there are mods it does not fit well on. It will not sit flush on my Poldiac, my Nemi barely has enough threads in the adjustable 510 for the positive pin to be stable with it flush. Barely a gap with my Roller. Works well on the Hana but can teeter.
They are supposed to have fixed the long 510 thing
Dripping, you have to take the cap off or deal with juice out of the air holes. Dripping from the top unless you are very careful it will run down the wick and into the air hole. You also have to route your cotton away from the edge of the deck, it will weep juice onto the deck and out the air hole. I just take the cap off and drip down the side of a post and filler up. She holds a bit over 2 mil
It can be a PITA to build because of the posts but is well worth putting up with.
510 on mine is a tad long, there are mods it does not fit well on. It will not sit flush on my Poldiac, my Nemi barely has enough threads in the adjustable 510 for the positive pin to be stable with it flush. Barely a gap with my Roller. Works well on the Hana but can teeter.
They are supposed to have fixed the long 510 thing
Dripping, you have to take the cap off or deal with juice out of the air holes. Dripping from the top unless you are very careful it will run down the wick and into the air hole. You also have to route your cotton away from the edge of the deck, it will weep juice onto the deck and out the air hole. I just take the cap off and drip down the side of a post and filler up. She holds a bit over 2 mil
It can be a PITA to build because of the posts but is well worth putting up with.
5 posts in an odd pattern (Hermes RDA) ? Need to watch the review...
Been really interested in the Magma, wondered about dripping technique, you just answered my primary question, really torn between it and the TOBH...
Been really interested in the Magma, wondered about dripping technique, you just answered my primary question, really torn between it and the TOBH...
I got to play with a TOBH, it is nice, very nice. It performs just like our Patriots. It is built better and is sexier. The Magma is a different thing entirely. It is well worth the money (too me) and the flavor is off the chains. I declined to take the used Tobh from my friend, he sold it to another friend. Had it been a different "experience" for vaping I probably would have bought it. But man, the Patriot does the same thing
I might still buy one if they hit when I do not have something else I am chasing.The Hermes V2 is a 3 post atty with air coming up to the bottom of the coil, it has a 2 mil capacity as well.
Watch the vid if you get time, it is well done.
Thanks Fear
Running' out of time tonight, will take a lookie when we get to my sisters tomorrow...
Running' out of time tonight, will take a lookie when we get to my sisters tomorrow...
Morning Guys in MBV Land... I've been wondering where some of my chat buddies were Hope your all enjoying your Easter weekend. An your Fav juice. I found it fitting to have my Cotton candy Juice today
So I got my First Ohm Meter yesterday now I'm set to try out building my first coils.
Hope your all enjoying your Easter weekend. An your Fav juice. I found it fitting to have my Cotton candy Juice today So I got my First Ohm Meter yesterday now I'm set to try out building my first coils.
Morning Guys in MBV Land... I've been wondering where some of my chat buddies were
So I got my First Ohm Meter yesterday now I'm set to try out building my first coils.
Congratulations! Rebuilding can be rewarding, you get to tailor your vape to your liking once you get the hang of it.
Morning Guys in MBV Land... I've been wondering where some of my chat buddies were
So I got my First Ohm Meter yesterday now I'm set to try out building my first coils.
Good luck with it. I finally decided to upgrade too. I ordered a Kayfun lite plus on sale and have been busy studying Youtube for pointers. Should be here tuesday. I think I have all the necessary kit to make it work. I want to see what all the hype is about. I've also been playing with some diy juices.
I've had some really sore lips lately and want to see if it's a reaction to pg or vg. Cigarettes were never this interesting......
Good morning misfits
It's not vape related, but I'm going to the NY Auto Show today. It will be fun to do something other than work for a change
Have a good one all . . . .
It's not vape related, but I'm going to the NY Auto Show today. It will be fun to do something other than work for a change
Have a good one all . . . .
Oh yes, so fun to look!!Good morning Cheryl
I'll buy a fancy new car once I win the lottery
(but it's fun to look and drool
- Status
Similar threads
