My Buzz is on the way and I have a question.

Status
Not open for further replies.

mistinthewoods

Vaping Master
ECF Veteran
Feb 4, 2010
4,956
1,822
67
Brooklyn, MI
Only if you want them. You will be able to adjust the voltage to whatever you want. That's what's great about the Buzz. You can make any atty or carto perform at it's best by tweaking the voltage.
I like to experiment with different attys and cartos myself and the Buzz makes this a lot more fun. I've found a great combo with NotCigs and Ikenvape.
 

FranC

Long time vaper.
Supporting Member
ECF Veteran
Verified Member
  • Oct 1, 2010
    195,456
    645,779
    New Hampshire
    Only if you want them. You will be able to adjust the voltage to whatever you want. That's what's great about the Buzz. You can make any atty or carto perform at it's best by tweaking the voltage.
    I like to experiment with different attys and cartos myself and the Buzz makes this a lot more fun. I've found a great combo with NotCigs and Ikenvape.

    I have some cartos from Iken and also some from VaporTalk that work very good.
     

    mwa102464

    Resting In Peace
    ECF Veteran
    Oct 14, 2009
    14,447
    12,564
    Outside of the Philadelphia Burbs, NJ & Fla
    I highly recommend the Mini HV-801 From Iken, as well as getting Buzz's native 801 top cap connector, it has just deep enough of a well that when you drip a lot like I do that it not only holds and leftover liquid thats drops through the Atty but when you take a pull it sucks it right back up into the Atty, " no muss no fuss " when dripping this way, and these Mini HV-801'S ARE JUST THE BOMB, they really bring out the flavor more so then other type of Atty's, just my opinion of course.
     
    Last edited:

    Bovinia

    Divine Bovine
    ECF Veteran
    Jul 17, 2010
    14,449
    50,826
    65
    South Carolina
    Are the attached drip tips on those aluminum? I have some of the dream tips from CoV and some of the clear shorties and you couldn't pay me enough to part with them. I have a metal one that I hate..it's cold and tastes like...metal.

    Funny how we all have such different tastes in hardware except for the Buzz :)
     

    k5blazer

    Super Member
    ECF Veteran
    Verified Member
    Oct 1, 2010
    787
    611
    Fredericksburg, VA
    Personally I think HV is slapped on a carto or atty just so they can charge more for it. I use plain old 3ish ohm boge 510 cartos from CoV and they work great for me vaping at 4.6v :)

    I have some of these...I like them.

    Try his 510 drip tip cartos they are amazing. I use them like regular cartos.

    I'll get some when he gets them...I think they have the premiums in stock.

    I highly recommend the Mini HV-801 From Iken, as well as getting Buzz's native 801 top cap connector, it has just deep enough of a well that when you drip a lot like I do that it not only holds and leftover liquid thats drops through the Atty but when you take a pull it sucks it right back up into the Atty, " no muss no fuss " when dripping this way, and these Mini HV-801'S ARE JUST THE BOMB, they really bring out the flavor more so then other type of Atty's, just my opinion of course.

    I have the HV/LR 801 2.5 ohm in my cart...I tend to vape in the 4.0-4.5 range with my joye 2.5 attys.

    I have a 510 Buzz, i can get an adapter or the 801 top cap. What would be best.
     

    mistinthewoods

    Vaping Master
    ECF Veteran
    Feb 4, 2010
    4,956
    1,822
    67
    Brooklyn, MI
    Are the attached drip tips on those aluminum? I have some of the dream tips from CoV and some of the clear shorties and you couldn't pay me enough to part with them. I have a metal one that I hate..it's cold and tastes like...metal.

    Funny how we all have such different tastes in hardware except for the Buzz :)

    I think they're stainless. I hate the tips. Love the cartos but hate the tips. I just pop on a plastic derlin or twisted and away I go.
     

    5cardstud

    ECF Guru
    ECF Veteran
    Verified Member
    Jan 1, 2010
    22,746
    50,647
    Wash
    Personally I think HV is slapped on a carto or atty just so they can charge more for it. I use plain old 3ish ohm boge 510 cartos from CoV and they work great for me vaping at 4.6v :)

    So did I an I still have a bunch of them I'm debating whether to sell or just keep as back up or if times get bad. When I tried Ikens it was the difference between a Pinto and a new Mercedes Benz. They are metal tips and I like the cold part but most people don't. You can order them without the Drip Tip.
     

    5cardstud

    ECF Guru
    ECF Veteran
    Verified Member
    Jan 1, 2010
    22,746
    50,647
    Wash
    If he sells them for a buck eighty each without the tip I might give em a try, then I could grab a couple more twisteds on the same shipping charge.

    This unemployment crap is sucking the life outa me :(

    They're expensive but got mine on sale. Just wait for a sale to come up. The good thing is people have had some of them last 3 weeks before the quality started to fade. I have on a couple of them myself.
     
    Last edited:

    Ransyd1

    Senior Member
    ECF Veteran
    Aug 20, 2010
    97
    5
    Oregon, USA
    I highly recommend the Mini HV-801 From Iken, as well as getting Buzz's native 801 top cap connector, it has just deep enough of a well that when you drip a lot like I do that it not only holds and leftover liquid thats drops through the Atty but when you take a pull it sucks it right back up into the Atty, " no muss no fuss " when dripping this way, and these Mini HV-801'S ARE JUST THE BOMB, they really bring out the flavor more so then other type of Atty's, just my opinion of course.

    I just got a couple of these.......LOVE THEM!

    Highly recommend!
     
    Status
    Not open for further replies.

    Users who are viewing this thread